[ ROM ] [ KITCHEN ] JUICY 8 - Build 090922H (23052.5.3.0) [UC]

[NinjaDuck]

Originally Posted by Tannerj

is there a fix yet for UC to load SDconfig.txt file?

Thanks....tannerj

Install this file posted earlier:

sd autorun config.cab

http://forum.ppcgeeks.com/attachment...3&d=1246241756

[pknyo]

I just tried flashing to juicy 8, but I`m having a problem. Its hanging up at 74%. I`ve gone through the recovery process, closed all open applications and restarted with all startup programs disabled. And I tried copying the .nbh file to a generic RUU.

When I tried the first flash I had my ipod connected as well, and Windows Device center wasn`t opened. I`m running Windows 7 RC the error code is [262]

[purian23]

Originally Posted by pknyo

I just tried flashing to juicy 8, but I`m having a problem. Its hanging up at 74%. I`ve gone through the recovery process, closed all open applications and restarted with all startup programs disabled. And I tried copying the .nbh file to a generic RUU.

When I tried the first flash I had my ipod connected as well, and Windows Device center wasn`t opened. I`m running Windows 7 RC the error code is [262]

If you was flashing thru active sync.. Disconnect, turn off the phone if it'll shut off, or just remove the battery and put it back in...while phone is off.. Hold your Vol Down key and then press and hold your power button at the top untill you go into the tri color bootloader screen and relase, plug the phone back into your usb.. flash a new or different rom, then try juicy's again.. i've never ran into this issue with his rom..
Good Luck!

Originally Posted by pknyo

I just tried flashing to juicy 8, but I`m having a problem. Its hanging up at 74%. I`ve gone through the recovery process, closed all open applications and restarted with all startup programs disabled. And I tried copying the .nbh file to a generic RUU.

When I tried the first flash I had my ipod connected as well, and Windows Device center wasn`t opened. I`m running Windows 7 RC the error code is [262]

http://forum.xda-developers.com/showthread.php?t=298516

That post was back from 2007, but it may still help you.

[Eauh]

Originally Posted by lordrainkm

There was an old fix for this, probably worth a try before getting a new phone. This was an EPST bug, so it would remain even after a hard reset or a flash.

The fix was (or something similar to this):
##DATA# (##3282#)
You need your unlock code.
Change Active profile to 1, or if it is is one reset.
Exit, phone should ask to restart.

If you don't have your MSL (unlock code), there was a trick for that too:

* Change the following registry entries in:
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\ATDbgLog
Enable: 1
LogMode: 1
* Wait a reasonable amount of time and soft-reset (I have noticed that it seems to take longer for this value to take affect, so if you reboot and the registry values are not changed, then you need to do it again and wait longer)
* Check to see that the file \Temp\ATDbg0.txt has been created.
* Return the values back to what they were (most likely 0) waiting the same amount of time as above.
* Look in the ATDbg0.txt file and you should see a log of commands sent to the CDMA radio and there should be something like this somewhere in the file:

Code:

113 Tx:AT+HTC_RMSL=0
113 Rx:+HTC_RMSL: 354201
113 Tx:AT+HTC_ROTKSL=0
113 Rx:+HTC_ROTKSL: 216112

The numbers next to the Rx: +HTC_RMSL line should be your MSL

Fixed my issue. Thank you!

[cchris81]

Originally Posted by pknyo

I just tried flashing to juicy 8, but I`m having a problem. Its hanging up at 74%. I`ve gone through the recovery process, closed all open applications and restarted with all startup programs disabled. And I tried copying the .nbh file to a generic RUU.

When I tried the first flash I had my ipod connected as well, and Windows Device center wasn`t opened. I`m running Windows 7 RC the error code is [262]

Might want to try a flash from SD card. Copy the signed file to the root directory of your SD card. Re name it RAPHIMG.nbh
Then hold the volume and power button. While holding them soft reset and continue to hold. Screen will come up saying press power button to flash. Release the volume button and power button, and press the power buttton. Should be good to go. I'm running Win7 RC and don't have any problems, but i find myself flashing like this more and more as I'm on the road when a new rom comes out

[vdelarenal]

Hi, what on screen keyboard does this ROM use?

Regards.

[klone9d6r]

Has anyone figured out why this rom has problems with s2u2 ??
this is a great rom but i need s2u2 the way a fatboy needs cake..=D>=D>

[Snoman002]

Two problems.

One, I cant seem to find the setting for auto deletion of emails. My emails delete after a couple days and I want to stop that. On my stock ROM I found the setting to turn the auto delete off, I cant find it on this build. I dont get enough emails to worry about keeping them, not to mention that I delete every email I dont want anyways.

Two, is there anything regarding dialing issues from TF? I just checked the people tab to see if the tabs had been fixed (still dials the same number from all tabs), and now I cant dial anything. I believe that somebody before mentioned this, but I didnt see it in the previous 40 pages that I just read again. It seems that if I dial somebody, and then immediatly end the call, before it even connects, I cant dial anything for a couple minutes.

BTW, reflashed and it seemed to help my slowness issues, must have had a bad flash.

Great job Juicy.

BTW, anybody thought about making a Juicy8 Fixes post? Its a great ROM, but like everything there are some tweaks and fixes that need to be implemented. It might help somebody out if the fixes were posted in one place rather than a 600 page thread. Actually, that leads me to another question. Why is it a new release, such as going from Juicy7 to Juicy8, is done in the same thread? This thread was already HUGE and difficult to work with, adding a new release just adds to the maddness. Seems to me that a new thread would be the way to go, but I'm new around here so I imagine there is a good reason. Anybody care to share?

[dashiot]

Originally Posted by tx_dbs_tx

I would flash back to the stock sprint radio and see what happens. I bet that could be your problem. Juicy 8 works beautifully on my sprint touch pro using the stock radio i get great signal.

Was sleepy when i posted, i'm actually on R 1.03. MMS and Internet works fine and fast, just the Connection Fail Errors.