Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team

[Nagual]

If turning in a defective TP and the replacement's already ordered for pickup will Sprint really care if the phone comes in with a different radio or an unlocked status (I mean it's going to be out of my hands anyway soon)? It might be more challenging than usual to do this since my phone's graphics are extremely glitchy (the issue) so I'd rather save the hassle if I can.

[razorloves]

Originally Posted by Nagual

If turning in a defective TP and the replacement's already ordered for pickup will Sprint really care if the phone comes in with a different radio or an unlocked status (I mean it's going to be out of my hands anyway soon)? It might be more challenging than usual to do this since my phone's graphics are extremely glitchy (the issue) so I'd rather save the hassle if I can.

i wouldn't take the chance of them noticing it and refusing to honor the warranty. If the screen is really that bad, then you can try using MyMobiler here

[audioextremist]

Originally Posted by razorloves

i wouldn't take the chance of them noticing it and refusing to honor the warranty. If the screen is really that bad, then you can try using MyMobiler here

thats awesome. because i still need to send my phone back and the screen is grey. you probably saved me lots of money if they found out about windows 6.5 being on my phone

[audioextremist]

Originally Posted by cmonex

1) download Hard-SPL package from attachment, extract to an empty folder.
2) you must Have Phone Synced with PC in Windows Mobile!
3) run HardSPL exe that you downloaded before.
4) follow steps in the RUU, and check on the device for prompts after PC shows loading bar.
5) it should go to tricolour screen now and say 0.25.C-SSPL or for Verizon devices it should say 0.35-C-SSPL.
6) SPL flashes, device automatically reboots, job done.
7) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 0.35.CMONEX or 0.37.CMONEX (or 0.25.CMONEX MFG).

the step in red does not work for my HTC Touch Pro . I am using verizon btw. please help this is very annoying. my screen broke so i got a replacement so now i just have the old windows stock b.s.

do you think Verizon locked it out from flashing?

thanks

[razorloves]

Originally Posted by audioextremist

the step in red does not work for my HTC Touch Pro . I am using verizon btw. please help this is very annoying. my screen broke so i got a replacement so now i just have the old windows stock b.s.

do you think Verizon locked it out from flashing?

thanks

verizon did not lock it out from flashing. what problem are you having? error? what troubleshooting steps from post #1 have you tried?

[Nagual]

Relocker and everything worked beautifully with the newer MR Sprint official ROM. Thankfully I forgot and was reminded about the bootloader mode, so I was able to do it from the PC even with my garbled screen. A hard reset to clear my data is all I'll need, and Sprint can take it back none the wiser.

[rootlinux]

Have not seen this posted then again maybe I didn't read but.....

Anyone here received and new TP or a refurb lately?
Just got mine and WTH?

NEW SPL 40 that I could not unlock with SPL 37 unlocker.
Sooooo... I ran the Stock shipped rom to this device that uses SPL 35.
Now I can unlock it with SPL 37 unlocker and flash NRG greatness once again.

Only concern now is Sprint can tell by the SPL on the device that it has been relocked if it is taken back.
We need a NEW unlocker/relocker for SPL 40 I think.

Edit: It still isn't unlocking. ???

[captblaze]

Originally Posted by rootlinux

Have not seen this posted then again maybe I didn't read but.....

Anyone here received and new TP or a refurb lately?
Just got mine and WTH?

NEW SPL 40 that I could not unlock with SPL 37 unlocker.
Sooooo... I ran the Stock shipped rom to this device that uses SPL 35.
Now I can unlock it with SPL 37 unlocker and flash NRG greatness once again.

Only concern now is Sprint can tell by the SPL on the device that it has been relocked if it is taken back.
We need a NEW unlocker/relocker for SPL 40 I think.

Edit: It still isn't unlocking. ???

install this and run the app to get into bootloader mode ---> http://forum.ppcgeeks.com/attachment...1&d=1225521707. after you do that then try to unlock

[lowbud]

I can confirm that new refurbs are using SPL-0.40, however it's an easy fix to flash back to 1.03.651.4 to get SPL 0.37, then HSPL_037 unlock works as it should. 1.03.651.3 uses SPL 0.35, so save yourself some time and trouble and just goto 1.03.651.4 first.

This is what I did. Flashed to 1.03.651.4 and booted, synced to my desktop, ran hardspl 037, unlocked, verified in boot loader, flashed to mr2 for radio update and booted into os and updated prl. Entered boot loader again and flashed my custom rom. All is well.

Yes it's a pita. heh

To get back SPL 0.40, just relock 0.37 and flash to MR2, then it will be SPL-0.40 again.

[bradgordie]

Where can I find 1.03.651.4? I just got my replacement Touch Pro and it is SPL 0.40. I get how to do the rest, but just can't seem to find how to flash 1.03.651.4 or where it is located. Thanks!

Originally Posted by lowbud

I can confirm that new refurbs are using SPL-0.40, however it's an easy fix to flash back to 1.03.651.4 to get SPL 0.37, then HSPL_037 unlock works as it should. 1.03.651.3 uses SPL 0.35, so save yourself some time and trouble and just goto 1.03.651.4 first.

This is what I did. Flashed to 1.03.651.4 and booted, synced to my desktop, ran hardspl 037, unlocked, verified in boot loader, flashed to mr2 for radio update and booted into os and updated prl. Entered boot loader again and flashed my custom rom. All is well.

Yes it's a pita. heh

To get back SPL 0.40, just relock 0.37 and flash to MR2, then it will be SPL-0.40 again.