Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team - Page 76

Demigawd · #**751** (**permalink**) 06-22-2009, 10:12 PM

Hello all this is my first post here so please bear with me. If this is the wrong place for some of my questions I apologize.

I recently bought a Touch Pro from US Cellular and would like to put Mighty Rom on it but I haven't seen a lot of info on the US Cellular Touch Pro. So I have a few quick questions.

1. What HSPL should I use to unlock my phone.

2. I don't see any thing pertaining to US Cellular on in the Mighty Rom info, it lists every other CDMA provider but not US Cellular, does this matter?

3. The stock SPL says SPL-0.40.0000 if I should ever need to go back to all stock would I have to find this version? If so where can it be found.

4. Also relating to reverting to stock later. Should I need to be all stock can I use the US Cellular rom update on the HTC site to put the rom and radio back to the original shipped versions?

Thank you in advance for any help you can offer, and I promise I will try not to ask too many dumb questions beyond these 4

JonaDiaper · #**752** (**permalink**) 06-23-2009, 03:11 AM

i have a good question

once unlocked always unlocked?
or do you have to unlock everytime you want to flash your phone?

**razorloves** · #**753** (**permalink**) 06-23-2009, 03:28 AM

Quote:

Originally Posted by JonaDiaper

i have a good question

once unlocked always unlocked?
or do you have to unlock everytime you want to flash your phone?

once unlocked always unlocked.
You only need to relock it with the relocker in the first post of this thread if you need to return it.

**razorloves** · #**754** (**permalink**) 06-23-2009, 03:42 AM

Quote:

Originally Posted by Demigawd

Hello all this is my first post here so please bear with me. If this is the wrong place for some of my questions I apologize.

I recently bought a Touch Pro from US Cellular and would like to put Mighty Rom on it but I haven't seen a lot of info on the US Cellular Touch Pro. So I have a few quick questions.

1. What HSPL should I use to unlock my phone.

2. I don't see any thing pertaining to US Cellular on in the Mighty Rom info, it lists every other CDMA provider but not US Cellular, does this matter?

3. The stock SPL says SPL-0.40.0000 if I should ever need to go back to all stock would I have to find this version? If so where can it be found.

4. Also relating to reverting to stock later. Should I need to be all stock can I use the US Cellular rom update on the HTC site to put the rom and radio back to the original shipped versions?

Thank you in advance for any help you can offer, and I promise I will try not to ask too many dumb questions beyond these 4

Welcome to ppcgeeks.
1. use the .37 unlocker
2. mighty roms will work just fine on uscellular, as will just about all the custom roms in the cdma upgrade forum.
3. Some of the newer touch pro's have been coming with different version spl, like .36 and .40. Unfortunately, 37 is the only one available but there has been no problems reported here of anyone returning there phone with the wrong spl version. As long as it's locked and has the stock rom and radio, then you are good to go.
4. if you need to return to stock setup, just flash the rom update like you mentioned, and it will return your radio and rom to stock.

Demigawd · #**755** (**permalink**) 06-23-2009, 11:20 AM

Quote:

Originally Posted by razorloves

Welcome to ppcgeeks.
1. use the .37 unlocker
2. mighty roms will work just fine on uscellular, as will just about all the custom roms in the cdma upgrade forum.
3. Some of the newer touch pro's have been coming with different version spl, like .36 and .40. Unfortunately, 37 is the only one available but there has been no problems reported here of anyone returning there phone with the wrong spl version. As long as it's locked and has the stock rom and radio, then you are good to go.
4. if you need to return to stock setup, just flash the rom update like you mentioned, and it will return your radio and rom to stock.

Thank you for answering all my questions. If I can work up the nerve to flash my phone I think I may give this a shot tonight.

**MadlyAlive** · #**756** (**permalink**) 06-23-2009, 02:14 PM

So I got my TP replaced with a new one from Asurion (thank God it was new).

Downloaded the unlocker, ran it and it kept going straight from bootloader to a gray screen that said "Loading...". Tried manually updated SPL and still got the same thing...

I could not for the life of me realize what was going on! I got through to page 9 or 10 on this thread and realized that the "Loading..." screen is the same screen I see right before I hit the power button to update to a new ROM. Opened my SD card and BAM...there's a RAPHIMG.NBH sitting there...stupid me forgot to remove it!

Got rid of it, updated SPL and happily flashing to Mighty's latest 6.1 ROM.

Although no one helped me, I guess someone out there in this thread did since it finally came to me while reading through this!

halodve · #**757** (**permalink**) 06-24-2009, 01:38 PM

Thanks

IkeCorleone · #**758** (**permalink**) 06-24-2009, 08:15 PM

i tried to run the hardspl program and it says athenawrapper has stopped working. im on vista can anyone help me?

Rourke Swift · #**759** (**permalink**) 06-24-2009, 08:18 PM

Quote:

Originally Posted by IkeCorleone

i tried to run the hardspl program and it says athenawrapper has stopped working. im on vista can anyone help me?

Try re-downloading the unlocker, it's possibly corrupted. Had the Athena Wrapper issue when trying to relock and this fixed it for me, YMMV.

marinhd · #**760** (**permalink**) 06-25-2009, 12:12 AM

Just loaded the firmware and now when I try to setup Activesync for Microsoft Exchange on the phone I get a blank screen at the:

Choose the data you want to synchronize.

I downloaded the ROM as of 6/24/09

What do I need to do to get the Exchange back???

Thanks

Phone is Sprint Touch Pro

Running Yay4Juggs_v5.0