Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team

[Da1388]

Great Work! Thanks

[puff]

Originally Posted by jeggart

So, where can I get the stock SPL downgrade package??

Its the attachment on the first post that says Relocker

[puff]

Originally Posted by QKH

I just talk to a coworker of mine. He told me to stop by this froum. Here I am. Thank you very much for such thorough explanation. Where do I find unlocker file??

first post !!!

Originally Posted by neek45

Are all those steps done on the phone...like steps 3 and 4??

just the computer on step 3...
start from the computer and then check the screen on phone for step 4...

3) run HardSPL exe that you downloaded before.
4) follow steps in the RUU, and check on the device for prompts after PC shows loading bar.

[Pro Toucher]

I have had a Sprint Touch Pro since 11/2008. I hadn't tried to flash anything to it b/c
1) I've been afraid of bricking my device.
2) My comp had been out of commission until now.

I am trying to run the Hard SPL, but I keep getting an error:

"Raphael_CDMA_HSPL_037.exe - Application Error
X The application failed to initialize properly (0xc0000135). Click on OK to terminate the application."

Is this an error with the file, or is my computer just screwed up still? I'd really love to unlock the full potential of this phone. Please help!

[selders59]

Originally Posted by cmonex

UPDATE: VZW SPL posted. (there will be an all-in-one unlocker later, but until then please read the instructions and decide which file is for your device.)


CDMA Raphael Elite Team (see: http://forum.ppcgeeks.com/showthread.php?t=41345) presents exclusive Touch Pro CDMA Hard-SPL to you!

SSPL, HSPL, relocker made by cmonex, Wrappers by olinex, SD flasher and relocker (coming soon) by no2chem. thanks to NexVision (btw I'm really sorry), zule/Shadowmite and no2chem for testing!!!

there are three HSPL's now (for the non-verizon ones it is a similar scene to Diamond_C).

1. 0.25.MFG for Sprint/Alltel/Telus/Bell, for hackers only, because otherwise, it is too old, apparently has splashscreen issues and only 128MB ram. but it has mw, it has rtask, etc. etc.

2. 0.37 for Sprint/Alltel/Telus/Bell, for other people, this has no screen issues but no MFG commands.

3. 0.35 for Verizon touch pro's ONLY.


Important:

first, if you have GSM Touch Pro/Raphael (NOT CDMA, NOT SPRINT/VERIZON/ALLTEL/TELUS/BELL), this will brick your device.
to download a compatible hardspl package for gsm touch pro you can go to forum.xda-developers.com.
but if you have CDMA Touch Pro/Raphael, then you have to use this hardspl, not the one at xda-developers!!!


preparations before flash:

1) make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/d...DisplayLang=en
2) if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobi...ce-center.mspx
3) now decide which Hard-SPL you want to flash. if you have Verizon, flash VZW package (from verizon attachment). if you have Sprint, Telus or Alltel or Bell, flash default package (Raphael_CDMA_HSPL_037.zip).


instructions:

1) download Hard-SPL package from attachment, extract to an empty folder.
2) you must Have Phone Synced with PC in Windows Mobile!
3) run HardSPL exe that you downloaded before.
4) follow steps in the RUU, and check on the device for prompts after PC shows loading bar.
5) it should go to tricolour screen now and say 0.25.C-SSPL or for Verizon devices it should say 0.35-C-SSPL.
6) SPL flashes, device automatically reboots, job done.
7) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 0.35.CMONEX or 0.37.CMONEX (or 0.25.CMONEX MFG).

NOTE: you will not see the SPL version during normal boot, that is the OS version, not SPL!
to enter bootloader mode to see version: with the device turned on, press and hold the volume down button along with the power button, then press the reset button with the stylus tip, then release the volume down and power buttons when bootloader tricolour screen appears.

NOTE 2: anyone having problems with the device entering SSPL automatically, please copy SSPLManual.exe from the SSPLManual.zip attachment to the device and run it. then once the screen is in SSPL, run RUU manually. i.e. you run the RUU on the PC, if it isn't obvious.
make sure to get SSPL-Manual specifically for Verizon phones from the verizon package.

NOTE 3: this is unsigned Hard-SPL. no limitations on flashing ROMs or radio packages. also, this has overwrite protection, if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package is also available here.

NOTE 4: do not use this RUU to flash anything else! this is only intended for flashing the Hard-SPL.

NOTE 5: use Relocker *only* if you need to return the phone for warranty. only use it as last step - after reflashing stock OS and radio. Default relocker is for Sprint etc, Raphael_CDMA_VZW_Relocker in the verizon package is for Verizon touch pro's.

--------------------------------------------------------------------------

Finally, Please Donate to the CDMA Raphael Project Team - http://shorl.com/frastijeketrebo - Thanks!!

CMONEX, I have to apologize. Earlier I sent some info to someone looking for an unlocker program. Since I use yours I sent him your link but I spelled your name wrong and for that I apologize.

[7inchbaby]

Just wanna drop in and thanks. donation sent.

[soweto]

Guys, I want to apply this to my fone, but how do I tell I have a CDMA or a GSM Touch Pro

Originally Posted by Pro Toucher

I have had a Sprint Touch Pro since 11/2008. I hadn't tried to flash anything to it b/c
1) I've been afraid of bricking my device.
2) My comp had been out of commission until now.

I am trying to run the Hard SPL, but I keep getting an error:

"Raphael_CDMA_HSPL_037.exe - Application Error
X The application failed to initialize properly (0xc0000135). Click on OK to terminate the application."

Is this an error with the file, or is my computer just screwed up still? I'd really love to unlock the full potential of this phone. Please help!

You have to run the unlocker on your computer while your phone is synced with activsync. Then follow the prompts on your screen

Have fun

[puff]

Originally Posted by Pro Toucher

I keep getting an error:

"Raphael_CDMA_HSPL_037.exe - Application Error
X The application failed to initialize properly (0xc0000135). Click on OK to terminate the application."

Is this an error with the file, or is my computer just screwed up still? I'd really love to unlock the full potential of this phone. Please help!

you need to install .net framework on your PC
here is a link to .net framework ver3.5

[puff]

Originally Posted by soweto

Guys, I want to apply this to my fone, but how do I tell I have a CDMA or a GSM Touch Pro

GSM = overseas device
CDMA = US device

If your using it, and your in the US, chances are you have a CDMA device.
You can also check your radio/rom version and google 'em