PPCGeeks - [FINAL] OMJ's HTC EVO 2.2 Custom ROM v4.6 | FroYo 3.70.651.1

PPCGeeks (http://forum.ppcgeeks.com/index.php)

- CDMA HTC Evo 4G Development (http://forum.ppcgeeks.com/forumdisplay.php?f=210)

- - [FINAL] OMJ's HTC EVO 2.2 Custom ROM v4.6 | FroYo 3.70.651.1 | *Updated 3/29/11* (http://forum.ppcgeeks.com/showthread.php?t=123534)

Re: OMJ's HTC EVO 2.2 Custom ROM v3.0 | FroYo 3.26.651.6 | *Updated 8/13/10*

OMJ or Anyone,

When I fastboot flash userdata data.img

I get FAILED (remote: data length is too large finished. total time: 0.004s)

Re: OMJ's HTC EVO 2.2 Custom ROM v3.0 | FroYo 3.26.651.6 | *Updated 8/13/10*

Quote:

Originally Posted by OMJ (Post 1910016)

to elaborate once again on my recommendation to wipe & restore data.img, I have done this several times in the last 16 hrs, works great....the problem w/ no wiping is the possibility of data corruption.

here are some simplified steps....

-reboot into recovery, do a nandbackup

-toggle USB, copy the fresh data.img to c:\sdk\tools (or wherever your path is)

-copy new ROM to sd card

-toggle USB again

-wipe data & dalvik-cache

-flash new ROM (DONT REBOOT)

-wipe data & dalvik-cache again

-power down

-boot into bootloader

-select fastboot

-from pc (usb cable plugged in still) type... fastboot flash userdata data.img

-when finished, reboot

Ok, now that I'm home and ready to try this I just took some time to read it a little more clearly and.....

Is this to update the PRI or to flash your new rom?

Reason I'm asking is the because the step that says "-flash new ROM (DONT REBOOT)"

Thanks again for all the help.

Re: OMJ's HTC EVO 2.2 Custom ROM v3.0 | FroYo 3.26.651.6 | *Updated 8/13/10*

Quote:

Originally Posted by touch_rules (Post 1910271)

For the new ROM as far as I know. I updated my PRI before doing this rom though.

Re: OMJ's HTC EVO 2.2 Custom ROM v3.0 | FroYo 3.26.651.6 | *Updated 8/13/10*

Quote:

Originally Posted by jayhuffdaddy (Post 1910272)

For the new ROM as far as I know. I updated my PRI before doing this rom though.

So what was the magic combination you did to get the PRI updated?

General question for all......

What ROM are you on when you successfully get the PRI to update?

Thanks.

Re: OMJ's HTC EVO 2.2 Custom ROM v3.0 | FroYo 3.26.651.6 | *Updated 8/13/10*

Quote:

Originally Posted by touch_rules (Post 1910280)

So what was the magic combination you did to get the PRI updated?

General question for all......

What ROM are you on when you successfully get the PRI to update?

Thanks.

I was on OMJ'S deodexed 2.2 I believe and followed this post to fix it.
http://forum.ppcgeeks.com/showpost.p...6&postcount=56

Re: OMJ's HTC EVO 2.2 Custom ROM v3.0 | FroYo 3.26.651.6 | *Updated 8/13/10*

Quote:

Originally Posted by jayhuffdaddy (Post 1910287)

I was on OMJ'S deodexed 2.2 I believe and followed this post to fix it.
http://forum.ppcgeeks.com/showpost.p...6&postcount=56

Thanks man, trying now on my Win7 PC since my mac will automatically decompress the rom and mess everything up. I will let you guys know what happens in a few.

Re: OMJ's HTC EVO 2.2 Custom ROM v3.0 | FroYo 3.26.651.6 | *Updated 8/13/10*

Quote:

Originally Posted by nvrnugh (Post 1910154)

So you can't do the rom with the prl update and just be done with it??

no...the PRI update comes from Sprint, I cannot include in the rom

Quote:

Originally Posted by jelive (Post 1910169)

OMJ

Have had several attempts at Handsfree Activation and tried just about every recommendation...no go for PRI 1.40

Is there any possible connection to the *.img file or my location. Clockwork is showing 2.5.01 Swear I had later version before I started all this PRI update stuff. Someone also recommended older EPST version...would that screw me up in any way?

Jim

anythings possible, have u tried backing up, then flashing the stock rooted rom, then ##786#?

Quote:

Originally Posted by yaaah_hoo (Post 1910255)

OMJ or Anyone,

When I fastboot flash userdata data.img

I get FAILED (remote: data length is too large finished. total time: 0.004s)

others have seen this too, how big is your data.img? it could either be too big or could be from not wiping over several roms, causing it to bloat

as much as a pain as it is, when I first starting doing this, I wiped , then flashed then setup all my settings & apps, then took another backup....the data.img was considerably smaller. So I think it's best to start w/ a clean slate.

Since I've started using this process, I no longer have to backup anything via titanium or mybackup pro, cuz when I write the data.img, I'm back where I left off.....but u have to go through the nand backup each time b4 flashing

Quote:

Originally Posted by touch_rules (Post 1910271)

this procedure is to restore all your settings, apps etc, after flashing (and wiping)

Re: OMJ's HTC EVO 2.2 Custom ROM v3.0 | FroYo 3.26.651.6 | *Updated 8/13/10*

Tells me if I'm doing this wrong. So everytime you flash a new rom you'll have to go to Titanium backup and restore your back up to get all your apps back. This process takes me over 20 minutes to do it. It seems like a nuisance. It's bc even though I'm running a batch update I still have to click Install then Done over 100 times. Man it really sucks.

Re: OMJ's HTC EVO 2.2 Custom ROM v3.0 | FroYo 3.26.651.6 | *Updated 8/13/10*

Quote:

Originally Posted by yaaah_hoo (Post 1910311)

no, when u do the nand backup, the data.img has all of that.....

Re: OMJ's HTC EVO 2.2 Custom ROM v3.0 | FroYo 3.26.651.6 | *Updated 8/13/10*

Quote:

Originally Posted by touch_rules (Post 1910280)

So what was the magic combination you did to get the PRI updated?

General question for all......

What ROM are you on when you successfully get the PRI to update?

Thanks.

I updated my PRI on Froyo v2.1 stock kernel odexed, I got it on the 5th try using the
##786#
MSL
Menu
Reset
Reboot and check for success

##3282# did not work for me
Remember to do a backup 1st