Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 

Updated too, this morning. Rhod400 boots to clock screen, shows no service, then reboots. Back to 10/7.

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 

I removed my old cab, downloaded and installed the Sep 28 cab. Then ran the update and my 10-9 works fine.

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 

So anybody on Rhod 400 get the newest kernel working. Every time I try it it goes to the lock screen then reboots. I have tried to reformat the disk and tried to use a new data.img. If anybody has any advice plz post

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 

You'll have to reinstall the cab from Sep. 28 and then update with the startup app. That's what I did and it works fine now.

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 

I can't see the change logs??? Even after I go 'there'??? :banghead:

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 

I did a fresh install and update to no avail... still reboots... Touch Pro 2 on Sprint

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 

The 20101009_180222 kernel restarted shortly after the lock screen came up. Downloaded the other 10/9 kernel (20101009_121955) and it boots up and works for me. Saw a comment posted for the non-working kernel that it's battery temp reporting causing the issues.

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 

you need to reformat your sd card....
Use this tool
http://forum.ppcgeeks.com/tp2-androi...lent-mode.html

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 

Hey imnuts do you know when the devs are going to fix the 201009_180222 build and do you know the changelog to that kernel?

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 

Looking at the kernel site, and going off other people's experieces, that won't help.

I'd assume they'll fix it soon, but no idea. And the build logs and such are at the kernel build site

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 

Sorry guys I wasn't home all day and didn't see the bad kernel!! I have gone back to the first 10.09 kernel instead of the newest that has issues.

Run the update tool for 9.2 update.

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 

Update app is crashing during the extraction phase. Went to folder where upgrade.zip was to try a manual extraction and keep getting CRC errors. Tried multiple downloads to rule out bad connection causing the errors. Anyone else experiencing this?

EDIT: Deleted upgrade.zip and retried the process no issues.

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 

Everything I read says the wifi tethering is working. I am running the latest kernal. I cant seem to get it to work. I downloaded the XDA tethering apk and am having no luck. When I start tethering it says it started with errors check the log. Then my laptop will not find the network. Am I missing a setting or something. Thanks.

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 

Is your wifi connecting...or just can not tether...as I am having similar issues connecting to wifi with my Verizon TP RHOD500 on current kernel???

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 

I have never used the XDA wifi tethering but the Barnace app in the market works beautifully. Not sure it is safe from a data usage standpoint but the verizon data usage app records the data use along with all of data use on the phone itself so it seems to be okay.

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 

After yesterday's bad kernal problem, I went back to Blazn092810 cab and started over. Everything is working very good, but I lost a bunch of ringtones. They were there previously. How would I get those back? (tia)

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 

Been having crashes in the program today; bad Crc Errors in modules.

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 

I did the same and things seem to be running much better. Thanks.

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 

HEARING ABOUT ALL THE NEW PROBLEMS I have stuck with the 9/28 version and havn't updated everything is working great.

Now only if the 3.5mm jack could work I could listen to pandora while working out!!!

How far is this from being solved Reefermattness?

If you have the files have you tried putting them in storage card/andboot/media/audio/ notifications?

What package where you running before? maybe extract it and save it then copy to the 9/28 version.

Other then that not sure.


_____________________-

Question guys. How come It always takes forever for my location to be found. It never gets found!

I have to force a location for fancy widget to work and forget about navigation!!

I have Gps location working, Have wifi locations working and Im sure something else dont remember.

Can anyone tell me how to get this to work properly? What is the difference between all these locators and which one SHOULD I be using for my location to work?

Thanks guys and will thank all who help.

_____________________________________________




Im also experiencing some serious battery drain. I have 100% charge then about 3 hours later its completly drained!!!

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 

2010_10_10 Kernel update available for update tool! Fixes the shutdown for Rhodium on boot.

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 

thx reefer so is the changelog for the 2010_10_10 kernel the same as the one that wasn't booting.

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 

I was running the 9/28 cab and had a lot of ringers. When the update went bad I cleaned the sd card, reloaded 9/28 and did the update (after the new update was in place). The phone worked very good but was down to 5 choices of ringtones. I now updated to 10/10 and it's still the same - 5 possible ringtones. I guess, Mod or anyone, please tell me how many stock ringtones you have..,

---------
I agree with battery drain...

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 

Try downloading the app..

Zedge

There are thousands of ringtones some very cool ones.

Take a look at it you wont regret it.

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 

Anyone else having issues with their phone not locking all the buttons or on notifications?

I've pocket dialed a few people recently. I've come to find the menu (windows) button unlocks the device too easily and being right beside Send, it is the next button to be pressed.

Also any messages I get seem to unlock it. It may be from SMS popup but still like to make sure I don't end up calling my boss when I sit down in a chair.

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 

Thanks Mod, I've got zedge and phone zoo, but I wanted the original stock ones... I think I found the zip file that has them/some here.
I'm loading the file now.

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 

I was having the same issue until I started using this version (attached) that i found somewhere in this thread 50-60 pages ago...

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 

thanks for your hardwork :):):)

livewallpapers still not working! but i very happy with my touch pro 2 android :D, i hope android is fullyworking on my touch pro 2 in the next time :D:D:D

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 

update: mic in incoming call still not working :D:D:D but it working in outcoming call!

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 

That is the one I was trying. I cant get it to work. Tried the Barnacle one too. No luck. I guess I will try the latest kernel again and see what happens.

Edit. Just updated to the 10-10 kernal and its working fine now. Must have been and issue with the 10-9 one.

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 

I like turdles

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 

I don't know about anyone else, but my RHOM500, hasn't tolerated the last few builds. It just freezes while booting into linux. I can take a picture of which code/line it crashes at if it'll be helpful. Uninstalling/reinstalling the program doesn't help.

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 

The latest works fine for me with RHOD500.

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 

Try reformatting your SDCARD

Use this SD Formatter 3.0 (Beta) for SD/SDHC/SDXC - SD Association

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 

Some do some dont but why would you even use them. They are painfully slow..

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 

IMO Painfully is a understatement!!!!!!:thumbleft:

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 

Installed the cab version for the first time on my Touch Pro 2 and notice it takes a very long time on the linux screen with the scrolling lines...its still doing it after close to 8 min. I also did an update to before booting. Is this normal?

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 

If it's still scrolling and not frozen, I'd let it run. But mine never took 8 minutes. You may have to try it again without update, let it boot and then install update.

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 

It's just you.

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 

The starfield one is okay tho, the rest is very slow indeed :)

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [10/04] BATT UPDATES!
 

can you please send me a link to the test 5 kernel?