Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 

Yes it did work, thanks for checking back.

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 

Reefer:

How can we modify the build.prop file in the system folder? I'm trying to fix a problem with my certain ringers only ringing one time during an incoming call, and the possible fix entails modifying the build.prop file. I can successfully modify it using Root Explorer, but when I reboot none of the changes stick. I've tried adding the line in my startup.txt file also, but either it's: 1) still a bug or 2) startup.txt isn't the place to add the change.

Basically, it's changing the line from "ro.telephony.call_ring.delay=1" to "ro.telephony.call_ring.delay=2000."

Thanks for any insight you can provide.

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 

Holy crap, my little LED isn't staying on or flashing anymore - Was this part of the latest zImage / Modules fix? if so, thanks!

nm...it came back after droid crashed & rebooted.

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 

The LED is supposed to be on. Steady green is good, and what you want. If your orange more then green, try killing some programs. Or have reduce frequency of email checking, Favebook updates, Twitter updates, News updates, etc.

Your battery will thank you.

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 

That's the spirit, helping others on the site is what truly separates this place from anywhere else! :headbang:

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 

I too have noticed that the startup.txt /default.txt is unresponsive to certain entries. For instance when I check the Rhod400 kb layout and select force cdma, it edits the .txt files but somehow the next time I launch project android it asks for the same selection all over again even though they've been added to the file.

Meh... I realize Reef said they're working on a new bootloader config to address some of these issues... I just forgot. My bad. I can wait.... is it ready yet?:twisted:

kidding kidding.

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 

I just installed the market access apk to open the market place, and it worked like a charm. Very cool to finally see all the apps that are not free.

Here is the link-

http://amip.tools-for.net/android/MarketAccess

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 

wow, never knew this existed very cool. Personally I'll stick with the free stuff but thanks for the find.

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 

No problem. For those that are new to android like me, the linked file is a zip. Download that file, move it to your phone and rename that file to an .apk. Then just use your app installer of choice to install the program. Oh, here are a couple of the carrier codes not preinstalled for us US folks -

Sprint in USA is 310120
Verizon in USA is 310012
AT&T in USA is 310410

Put your carrier number in the Custom section and that is all you do.

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 

Yes it helps with the other voice recognition apps.

Well why didn't you click that thanks button?! LOL

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 

forgive if this is not the proper place for this posting, but where can I find out if SenseUI for cdma TP2 android will be updated. I'm running 2.1 with SenseUI with the new sound zimage. The only problem I'm having in the MarketPlace is trying to do a search. If I search it reboots Android. and there is no GPS in this system build. How can I keep sense and get GPS?

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 

I think the sense builds were abandoned, they were atrocious. You could try updating your zImage/modules/rootfs to see if GPS'll start working. Same with the Market... you may also try the old delete of the data.img for your market problem.

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 

Thanks for the info. I have already tried all the above except the , delete data.img one, but I am sure that it won't solve the gps problem. I will give it another shot. if it does not work, I guess off to Android v2.2 Froyo: BLAZN. Its just too bad because the visual interface of 2.1 SenseUI was pretty cool. Thanks again for the help.

Wirelessly posted (Mozilla/4.0 (compatible; MSIE 6.0; Windows CE; IEMobile 8.12; MSIEMobile6.0) Sprint T7380)

The Sense build was kind of flaky, used alot of memory and my phone was blazin hot (pun intended). The Froyo builds run much better IMHO.

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 

So far no huge problems for me on the new Blazn build. The only negative is the quick battery drain. I now can play Appeak poker against my wife online. That game is cool if you like Texas Holdem. Great job to the devs that helped to get this build up and running. Funny thing is, now sound is working, I tend to turn the sound off any way.lol

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 

As a long time lurker, first time poster ... thanks for the vibrant community that's gotten this project to where it is now. You people rule!

I have a Sprint TP2, and had issues with no signal and airplane mode with my SIM card in at first. I got it work work just fine with the SIM card in. I edited the startup.txt and changed "htc_hw.force_cdma=0" to "force_cdma=1".

Simply editing to set "htc_hw.force_cdma=1" did NOT work for me, with multiple reboots. Just my FWIW.

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 

I've installed the cab version on a Verizon Rhodium. It boots up and asks me to choose a phone for proper key mapping, then it boots into the intro screen with all the phones and the Android. But there it stops. Never been able to get past that intro. No amount of screen tapping or key pressing seems to matter. I just get to watch the Android move around the screen before I have to soft reset. I have tried selecting a different phone. Deleting the data file. Booting from Haret only. Same result every time. And yes, I have uninstalled and reinstalled it.

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 

Make sure you wait awhile, first time sometimes takes 10+ mins to load. No need to tap or press buttons...

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 

is android marketplace down for anyone else? I get network errors today, everything else appears to be working fine. I ran the updater last night, not sure if that had anything to do with it. I'm on a Sprint TP2 running the latest blazn build.

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 

If you used the tool to update your zimage/modules you will need to download the newest zimage/modules manually fromt he project tracking page to replace the broken ones. The tool right now does not work for zimage/modules and we are currently working on a replacement.

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 

Not quite sure what is wrong but I was running Android for about 2 days solid with no problems, but this morning my phone shut off and than boot back into the Sprint ROM. I have tried launching Android again but once everything loads up I just have a black screen, the phone is not off I can tell it's back lite but nothing happens. I have wiped my SD card clear and put all the Android back onto it but still the same thing. Maybe it's a simple fix but I can't figure out what's wrong.

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 

thanks, it's working now.

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 

Same thing has happened to me. It seems like SD cards (or at least some of them) are just not stable enough.

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 

I didn't see it mentioned but if anyone was looking or wondering importing Vcards from Outlook is easy.

Transfering from Simcard didn't work for me and Android just stayed on "Reading Sim Card..." and never did anything.

What I did was since I had all my contacts in Outlook I highlighted all of them, right clicked on a contact, "Send Full Contact", "In Internet Format (VCard)".

This will open an email with all of your contacts on the attachment line allowing you to select them all at one time.

I then connected my Phone while in WinMo and connected as a USB Drive. I then created a folder called VCard in the Root. Then I copied all of the slected contacts from the e-mail and then pasted them in the VCard folder.

Then I rebooted into XAndroid and went to contacts, brought up the menu (Windows Key), then selected "Import/Export" and finally "Import from SD". This gave me the option to import them all at once.

Sorry if someone did post this and I missed this. Hopefully this helps someone.

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 

I think most just use Google Sync with GMail to do it. I've been doing it with WinMo for years, and my contacts were pulled into Android with NO fuss whatsoever. It couldn't have been easier, and that way if I flash a new ROM, get a new phone etc I don't have to worry about my contacts.

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 

So I had Android running fine the other day. The I updated to the latest NRG rom and did the cab install of android. The first time I run it it works just fine. Then after Gmaps crashes the phone and I wait for WinMo to start again. I then try to run ProjectAndroid again from the menu and it freezes on a screen that sasy HaRet Version Pre-0.5.3- and has default.txt box. Nothing I can do will make android start again. I end up having to uninstall android and delete the entire android and andboot folders from my SD card. Any help would be great.

Also is it normal for Gmaps and Navigation to crash the phone?

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 

Are you overclocking in windows?

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 

If your asking me. No. Not that I know of. I am just running NRG's latest rom.

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 

Thank you robj19. even without bluetooth and camera i now officially am using android on my windows phone. lol. this is great :) By the way is anyone able to update the Voice Search app from the Marketplace or should i just look for the new one in other places?

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 

I went up to the thread search tool and typed in "default.txt" and with a little reading I found this post.... I guess youre not the first to have this problem.

:shock:

http://forum.ppcgeeks.com/showpost.p...postcount=1267

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 

im using nrg latest rom as well and it works fine i just dont have the android icon in the menu anymore but i just gointo total commander and go to storage card then andboot then haret.exe and its fine:rr:

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 

I see that facebook thinks my phone is the nexus one is this what the app store thinks it is?and if so why when I download the nexus one flash apk I get ap not installed.

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 

Just a heads up to those who didn't see this post from the XDA thread

Looks like the boss is cooking up a nice little surprise for us :thumbleft:

xda-developers - View Single Post - [PRJ][GSM&CDMA][CAB&RAR] XDAndroid AOSP Port & Startup Utility [8/30] FIXED NOISE!

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 

Posted a speakerphone work around thread.
Hope it helps.

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 

What sort of battery life is everyone getting right now? Also, is it safe to leave the phone plugged in charging over night with Android running?

Wirelessly posted (Mozilla/4.0 (compatible; MSIE 6.0; Windows CE; IEMobile 8.12; MSIEMobile6.0) Sprint T7380)

With heavy use, you get about 4-5 hours and 10-12 hours standby.

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 

^^That's about what I'm getting on Blazin. But, I've been consistently experiencing a very SOD-like state if I leave the screen off for more than a few minutes.

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 

Lol Reef you making an example out of me?! :wave: s'cool, I wasnt the first either lol.

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 

So what is it? Apparently xda is down atm...

Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [8/30] FIXED NOISE!
 

i think i looked at this earlier. if i am not mistaken it is wifi tethering