Re: [CAB] GSM Project Android Port and Startup Utility [03/31/10] NOW SUPPORTS CDMA
 

On sprint you should not need to do that. When you launch the app be sure to select "force CMDA", and it usually takes a minute or so after your in android to get data. If that still doesnt work go to settings, networks, and have it rescan for networks. Works fine for me. good luck

Edit: also take out your sim card if you already have not done so

Wirelessly posted (Mozilla/4.0 (compatible; MSIE 6.0; Windows CE; IEMobile 8.12; MSIEMobile6.0) Sprint T7380)

In order to get the CDMA World phones working (Sprint, Verizon, ect) you NEED to either take your SIM out or in WinMo put the phone on CDMA Only. That can be found in Settings - Personal - Phone - Network tab.

Re: [CAB] GSM Project Android Port and Startup Utility [03/31/10] NOW SUPPORTS CDMA
 

Thank you very much I have everything working. Do you know of an easy way to import my WM contacts to android?

Re: [CAB] GSM Project Android Port and Startup Utility [03/31/10] NOW SUPPORTS CDMA
 

www.google.com/sync

Follow instructions to sync WinMo with Gmail and then link your gmail account to android.

Re: [CAB] GSM Project Android Port and Startup Utility [03/31/10] NOW SUPPORTS CDMA
 

Just wanted to let everyone know that charging is working for me and I am on energy rom 6.5 sense ui 2.5 version. The thing is that my battery meter says 8 percent - 23 percent but it still charges. I have left it unplugged for over 4 hours and its fine and then i just plug it in to the wall while in android and it never goes over 23 % in the status bar but it stays charged for over 5 hours.

Re: [CAB] GSM Project Android Port and Startup Utility [03/31/10] NOW SUPPORTS CDMA
 

The charging is one of the most recent kernel fixes, so im sure the devs will be glad to hear its working. :) The battery meter has been worked on a lot lately, and now is much closer than it used to be. ;) At least its somewhat working now, and it shouldn't be too much longer before they have it fixed!

Re: [CAB] GSM Project Android Port and Startup Utility [03/31/10] NOW SUPPORTS CDMA
 

I can make and receive calls but I am unable to get data. I am on sprint. I have cdma only selected and have remove the sim card. The 3G symbols shows on top but i get the message when trying to sign in to Gmail that i do not have a network connection.
Any suggestions on getting it to work?

edit:
I can go to the browser and sign into gmail but I cannot sign into market place. It say i do not have a network connection

Re: [CAB] GSM Project Android Port and Startup Utility [03/31/10] NOW SUPPORTS CDMA
 

Did you try to go into network settings and rescan network. Sometimes I have to do this to "nudge" adroid to connect, usually only one time.

Re: [CAB] GSM Project Android Port and Startup Utility [03/31/10] NOW SUPPORTS CDMA
 

WOW great Job it works great and is very nice change from windows!
I have Mightyrom with cookies, and this Android easy to switch and play.

Re: [CAB] GSM Project Android Port and Startup Utility [03/31/10] NOW SUPPORTS CDMA
 

I really think this should be considered for a sticky at the top of the page. This is by far the easiest, most efficient way to do Android on the TP2. I am noticing that the thread is slowly creeping down the page and soon might end up on the second page. That would be a shame in my opinion!

Having a built-in updater like this makes it much easier for us to update our Android.

Re: [CAB] GSM Project Android Port and Startup Utility [03/31/10] NOW SUPPORTS CDMA
 

I totally agree. I do admit I look at the other threads to see when updates are out, then run the updater.

Re: [CAB] Project Android Port and Startup Utility [04/23/10] 2.1 BUILDS AVAILABLE!
 

Ok guys, I updated the first post, there are no download buttons yet, but the links for the new downloads are directly below the button for the 2.01 .cab.

The difference is the AOSP (Android Open Source Project) has no Sense UI, but is VERY fast, and minimal. This is built by phh using stinedb's new 2.1 kitchen. After booting and using ATK to close all apps, you have about 120MB free RAM!!

The Klinux 2.1 does come with the Sense UI, its a huge, fat file. Around 160mb I believe. Once you boot and use ATK to close apps, you will have about 60MB free RAM to work with. Not as much, but you gotta remember you got that fancy, pretty UI running. :)

Enjoy guys, the Sense UI .cab is a bit buggy when it comes to data, but wifi works great. I can personally fix my AT&T data connection by following these instructions, but I have had reports this work around does not work for everyone!

Re: [CAB] Project Android Port and Startup Utility [04/23/10] 2.1 BUILDS AVAILABLE!
 

testing out now...looks promising!

Re: [CAB] Project Android Port and Startup Utility [04/23/10] 2.1 BUILDS AVAILABLE!
 

I've got a problem. I downloaded the 2.1 with sense cab into my memory card. When i open file explorer and click on the cab from my storage card, it starts up but then says the installation was unsuccessful. Any help?

Re: [CAB] Project Android Port and Startup Utility [04/23/10] 2.1 BUILDS AVAILABLE!
 

Mine did the same thing.. looking into it now. :bigsmurf:

Re: [CAB] Project Android Port and Startup Utility [04/23/10] 2.1 BUILDS AVAILABLE!
 

thanks for the update.. I have one problem.. I dont know if i did something wrong but the sense ui build is VERY slow for me.. Like unusable slow.. is that normal ?

Re: [CAB] Project Android Port and Startup Utility [04/23/10] 2.1 BUILDS AVAILABLE!
 

It is slower, yes, but it shouldn't be unusable.

120MB free RAM without Sense, vs 60MB free RAM with Sense

perhaps try to delete your data.img and start over again? The 2.1 builds are both buggy right now & w/ sense its WAY worse.

Re: [CAB] Project Android Port and Startup Utility [04/23/10] 2.1 BUILDS AVAILABLE!
 

Been runnin this for the last 2 or 3 days and it's just amazing how much faster android is over WinMo... The few things that I see that's holding it back is sound, battery, GPS and power management... My two biggest concerns would be sound and proper battery reporting. If it had those two things, I would use it regularly. Not being able to know when it's going to take a crap is just not workable. And no sound... is like the dark age... lol I use my sound notifications for everything, even my alarm clock. Oh and USB interfacing would be nice too, especially for internet sharing, but not really necessary. Camera isn't very important to me... it's not a very good camera anyways to be quite honest...

If they fix the above few things... I think it'd be worthy of cooking into a ROM by itself and toss WinMo all together, this way it could be on the internal memory and you could pull the SD card when necessary.

Re: [CAB] Project Android Port and Startup Utility [04/23/10] 2.1 BUILDS AVAILABLE!
 

Same issue here, and I just downloaded it...

Re: [CAB] Project Android Port and Startup Utility [04/23/10] 2.1 BUILDS AVAILABLE!
 

I just put it on my TP2 and I got it to load fine, but after about 1 minute it just resets and goes back to WinMo. :( very frustrating. What am I doing wrong here? (it resets after a minute or less of running android). I keep trying to sign in to my google account and it won't get there before doing a soft-reset.

Re: [CAB] Project Android Port and Startup Utility [04/23/10] 2.1 BUILDS AVAILABLE!
 

So far on the non senseui one I can't get it to load, it just repeats the error "untracked pid (number) exited" over forever. I'll go back and read and see if I missed something. :(

Re: [CAB] Project Android Port and Startup Utility [04/23/10] 2.1 BUILDS AVAILABLE!
 

same here.

Re: [CAB] Project Android Port and Startup Utility [04/23/10] 2.1 BUILDS AVAILABLE!
 

good stuff, thanks
will give it a try

Re: [CAB] Project Android Port and Startup Utility [04/23/10] 2.1 BUILDS AVAILABLE!
 

Can anyone help me out?

Re: [CAB] Project Android Port and Startup Utility [04/23/10] 2.1 BUILDS AVAILABLE!
 

Okay, this is very annoying!

When ever I boot into Android w/ SenseUI, there is an error that keeps telling me that android.process.acore has stopped responding!

How do I fix this?

Re: [CAB] Project Android Port and Startup Utility [04/23/10] 2.1 BUILDS AVAILABLE!
 

for those stuck in the start up loop. (its a tease when the android robot peaks at you and it just blinks out and restarts the start up animation isnt it?)

after you first boot after it makes the data.img.

reset to winmo, delete data.img once again and let it boot haret once more. this time it should get past the start up animation.

If data isnt working go to wireless / add apn user verizon or sprint for name, select as default, and for apn use

internet.com

VZW Touch Pro 2 / Energy Rom / Android Flavor of the week, Sense UI build , 3g working on vzw


Its still a bit sluggish, but boy is she pretty with sense ui!

Re: [CAB] Project Android Port and Startup Utility [04/23/10] 2.1 BUILDS AVAILABLE!
 

Me too

Re: [CAB] Project Android Port and Startup Utility [04/23/10] 2.1 BUILDS AVAILABLE!
 

Does anyone know how to turn off the weather animations so it will speed up?

Re: [CAB] Project Android Port and Startup Utility [04/23/10] 2.1 BUILDS AVAILABLE!
 

I cant get out of airplane mode i click on it and just hangs there cant get no data at all thx great job

Re: [CAB] Project Android Port and Startup Utility [04/23/10] 2.1 BUILDS AVAILABLE!
 

I get both of the common errors mentioned above. Repeated PID errors on boot when using the non-sense package and repeated crashing of android.process after boot when using the sense package. But, I do want to say how much I appreciate everyone working hard on this port...truly amazing stuff.

Re: [CAB] Project Android Port and Startup Utility [04/23/10] 2.1 BUILDS AVAILABLE!
 

Everyone having issues, delete your data.img and try again. The 2.1 builds are very buggy, as you guys see. Also, if youre using the .rar you need to include both folders that are in there on the root of your SD card. Both Anboot folder and cache folder.

Re: [CAB] Project Android Port and Startup Utility [04/23/10] 2.1 BUILDS AVAILABLE!
 

How long does it take to boot into Android the first time? I installed the no sense UI one and it was still loading for about 20 minutes. It was just a screen with a bunch of numbers after the calibration. Do I need to have a different thing of android already installed or something before I run the cab?

Re: [CAB] Project Android Port and Startup Utility [04/23/10] 2.1 BUILDS AVAILABLE!
 

Can't install Sense UI 2.1 cab. Goes right to unsuccessful.

Are you going to add rar versions for these 2.1 builds??

Re: [CAB] Project Android Port and Startup Utility [04/23/10] 2.1 BUILDS AVAILABLE!
 

Sense 2.1 cab worked first time starting up. Its slower than non sense but works. Also data worked immediately without having to make any changes. good job guys! sense to me is as good as sound or gps working :)

Re: [CAB] Project Android Port and Startup Utility [04/23/10] 2.1 BUILDS AVAILABLE!
 

I deleted my data.img and restarted android and still stuck in that untracked pid XXXX exited loop. I have ProjectAndroid 2.1AOSP 042210.cab installed to SD.

Thanks for help.

Re: [CAB] Project Android Port and Startup Utility [04/23/10] 2.1 BUILDS AVAILABLE!
 

Same here... can't install sense 2.1 cab. unsuccessful.

Re: [CAB] Project Android Port and Startup Utility [04/23/10] 2.1 BUILDS AVAILABLE!
 

Deleting data.img also did not work for me (non-sense version). The older project android builds work fine though, so thanks for all the work...looking forward to getting 2.1 working

Re: [CAB] Project Android Port and Startup Utility [04/23/10] 2.1 BUILDS AVAILABLE!
 

I have possibly found a temporary workaround for those of us getting the PID error on the non-Sense UI build.

Like me, I imagine most of us have downloaded the .cab file. Go ahead and DL and install the .cab file and if you get hung on errors try this:

Download the .rar file, expand it, and replace andboot and cache on your SD card with the ones you just expanded.

Run Project Android like normal and presto, Android! It worked for me, I hope it helps for others.

Re: [CAB] Project Android Port and Startup Utility [04/23/10] 2.1 BUILDS AVAILABLE!
 

That worked, thanks!

Re: [CAB] Project Android Port and Startup Utility [04/23/10] 2.1 BUILDS AVAILABLE!
 

I lied, it boots Android now but the above is the behavior I get now. :(