PPCGeeks Forums HTC Arrive HTC HD2 HTC Thunderbolt HTC Touch Pro 2 HTC Evo 4G HTC Evo 3D Samsung Galaxy S II Motorola Droid X Apple iPhone Blackberry
Go Back   PPCGeeks > Windows Mobile > WM HTC Devices > HTC Touch Pro 2 > Android On TP2 > Android On TP2 Development
Register Community Search

Notices


Reply
 
LinkBack Thread Tools Display Modes
  #1251 (permalink)  
Old 02-18-2012, 04:36 AM
milda25's Avatar
PPCGeeks Regular
Offline
Pocket PC: HTC Touch Pro 2 (Rhod100)
Carrier: O2-CZ
Location: Czech Republic
 
Join Date: Dec 2011
Posts: 79
Reputation: 5
milda25 is a n00b
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Re: [TESTING] - NAND OMGB (1.2.3)

Last night I had the phone turned off and connected to the charger. In the morning I could not even turn on the phone with the charger attached, or without it. I took out the battery, it came back and turned on the phone. Approximately 2 seconds with HTC logo appeared and then the phone started to restart repeatedly. I can get into the tricolor bootloader but after 2 seconds the phone shuts down. It looks as the battery was completely discharged and does not charge now. I tried an electric charger and USB charging from computer but the same result.
I have no other phone where I could recharge the battery. I do not have a second battery. Do you have anyone have any idea what could have happened and how to solve this? Thanks in advance.
Reply With Quote
  #1252 (permalink)  
Old 02-18-2012, 06:04 AM
wenciu's Avatar
Lurker
Offline
Pocket PC: HTC TP2
Carrier: ERA
 
Join Date: Dec 2010
Posts: 6
Reputation: 0
wenciu is a n00b
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Re: [TESTING] - NAND OMGB (1.2.3)

Quote:
Originally Posted by milda25 View Post
Do you have anyone have any idea what could have happened and how to solve this? Thanks in advance.
Known problem for me. Just connect your phone thru USB/wall charger and let it charge for some time. Then you should be able to run the system again and able to charge it fully again. For the future, remember to connect it when it comes close to 0% if it's possible.
Reply With Quote
  #1253 (permalink)  
Old 02-18-2012, 06:28 AM
milda25's Avatar
PPCGeeks Regular
Offline
Pocket PC: HTC Touch Pro 2 (Rhod100)
Carrier: O2-CZ
Location: Czech Republic
 
Join Date: Dec 2011
Posts: 79
Reputation: 5
milda25 is a n00b
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Re: [TESTING] - NAND OMGB (1.2.3)

Quote:
Originally Posted by wenciu View Post
Known problem for me. Just connect your phone thru USB/wall charger and let it charge for some time. Then you should be able to run the system again and able to charge it fully again. For the future, remember to connect it when it comes close to 0% if it's possible.
I powered off my phone yesterday evening when he was 35% of battery. After charging powered off phone I have better results with battery life. So my phone didn't comes close to 0%. During the night something happened. Today morning was my battery completely dead and charging thru AC and USB (I tried both) didn't nothing! Orange LED lights during charging, but probably no juice goes to my battery
Edit: my battery was always hot during the charging. Now my battery have only room temperature.

Last edited by milda25; 02-18-2012 at 06:31 AM.
Reply With Quote
  #1254 (permalink)  
Old 02-18-2012, 07:31 AM
Starfox's Avatar
N00b
Offline
Pocket PC: HTC Treo Pro/Touch Pro 2
Carrier: Sprint SERO/Boost
 
Join Date: Dec 2009
Posts: 47
Reputation: 25
Starfox is just getting started
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
I think I narrowed down the cause of the crash-after-tether-unloading. The wlan interface is named eth0, but the tether is wl0.1. I manually turned off wl0.1 via "busybox ifconfig wl0.1 down", then "busybox ifconfig eth0 down" printed "No such interface" and "busybox ifconfig" caused a hard crash similar to how it behaves via the GUI unload.

-- Starfox
Reply With Quote
This post has been thanked 1 times.
  #1255 (permalink)  
Old 02-18-2012, 01:04 PM
arrrghhh's Avatar
Testing Extraordinaire
Offline
Pocket PC: HTC Touch Pro 2 (RHOD400)
Carrier: Sprint
 
Join Date: Mar 2007
Posts: 3,604
Reputation: 7360
arrrghhh is a trusted member of the communityarrrghhh is a trusted member of the communityarrrghhh is a trusted member of the communityarrrghhh is a trusted member of the communityarrrghhh is a trusted member of the communityarrrghhh is a trusted member of the communityarrrghhh is a trusted member of the communityarrrghhh is a trusted member of the communityarrrghhh is a trusted member of the communityarrrghhh is a trusted member of the communityarrrghhh is a trusted member of the community
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Re: [TESTING] - NAND OMGB (1.2.3)

Quote:
Originally Posted by milda25 View Post
I powered off my phone yesterday evening when he was 35% of battery. After charging powered off phone I have better results with battery life. So my phone didn't comes close to 0%. During the night something happened. Today morning was my battery completely dead and charging thru AC and USB (I tried both) didn't nothing! Orange LED lights during charging, but probably no juice goes to my battery
Edit: my battery was always hot during the charging. Now my battery have only room temperature.
Hrm. Battery charging has been in LK for a couple of releases at least - and your behavior is the same as mine, when charging when the phone is OFF/thru LK, the LED goes orange, but stays orange even after pulling the plug. You cannot turn on the phone unless you pull the battery - same as me as well....

So that's odd that it did not charge your battery. My only suggestion would be to try and charge again... Just don't let it sit overnight, perhaps it will drain if you let it sit for too long...?

ACL was working on a new charging while off method that should work much better. Of course that doesn't really help your current situation...

Quote:
Originally Posted by Starfox View Post
I think I narrowed down the cause of the crash-after-tether-unloading. The wlan interface is named eth0, but the tether is wl0.1. I manually turned off wl0.1 via "busybox ifconfig wl0.1 down", then "busybox ifconfig eth0 down" printed "No such interface" and "busybox ifconfig" caused a hard crash similar to how it behaves via the GUI unload.

-- Starfox
Nice! I'd love to see that bug fixed.
Reply With Quote
  #1256 (permalink)  
Old 02-18-2012, 01:34 PM
milda25's Avatar
PPCGeeks Regular
Offline
Pocket PC: HTC Touch Pro 2 (Rhod100)
Carrier: O2-CZ
Location: Czech Republic
 
Join Date: Dec 2011
Posts: 79
Reputation: 5
milda25 is a n00b
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Re: [TESTING] - NAND OMGB (1.2.3)

Quote:
Originally Posted by arrrghhh View Post
Hrm. Battery charging has been in LK for a couple of releases at least - and your behavior is the same as mine, when charging when the phone is OFF/thru LK, the LED goes orange, but stays orange even after pulling the plug. You cannot turn on the phone unless you pull the battery - same as me as well....

So that's odd that it did not charge your battery. My only suggestion would be to try and charge again... Just don't let it sit overnight, perhaps it will drain if you let it sit for too long...?

ACL was working on a new charging while off method that should work much better. Of course that doesn't really help your current situation...
.
My problem is generally weird. I'm confused. I spent all day searching for information and testing all possible. The phone is now the following condition:
- Power button is completely dead (with the charger attached and without, cannot turns on my phone)
- With the charger attached to the phone in approx. 2-minute intervals spontaneously turns on. HTC logo appears, then LK blue screen and ACL logo. Around the time to appear ANDROID logo, the phone switches off again. This occurs in an endless cycle over again and again.
- The phone is connected to the charger, I took out the battery, I pressed the VolDown button and insert the battery back to phone (charger is still connected). Phone turns on and I got into the tricolor bootloader, but than I can do anything, the phone is switched off again.
IMHO there are two possible scenarios - the phone finally died or my battery for some reason is completely discharged and can not be recharged. I ordered a new battery and will be probably in Tuesday at my home. If the problem is in the battery, I will make a complete reinstallation of the phone and will see. Now I can not use flash from sd card, I can not use adb and FastBoot, I can use nothing
And yes, I know that the ACL is working on a new charge system, but I'm afraid I will not be able to try it ...

Last edited by milda25; 02-18-2012 at 01:42 PM.
Reply With Quote
  #1257 (permalink)  
Old 02-18-2012, 06:58 PM
milda25's Avatar
PPCGeeks Regular
Offline
Pocket PC: HTC Touch Pro 2 (Rhod100)
Carrier: O2-CZ
Location: Czech Republic
 
Join Date: Dec 2011
Posts: 79
Reputation: 5
milda25 is a n00b
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Re: [TESTING] - NAND OMGB (1.2.3)

I'm back in the game. I do not know how, but I drained from my battery last a few milliamps, performed the task 29 and recorded LK. Then the phone started charging correctly. I left him half an hour on the charger, then flashed recovery.img, installed OMGB and voala - it works. Eagerly await the update with the new system of charging
Reply With Quote
  #1258 (permalink)  
Old 02-19-2012, 12:53 AM
mbellot's Avatar
PPCGeeks Regular
Offline
Pocket PC: TP2
Carrier: Boost
 
Join Date: Jul 2010
Posts: 156
Reputation: 135
mbellot is keeping up the good workmbellot is keeping up the good work
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Re: [TESTING] - NAND OMGB (1.2.3)

Slightly OT question/request here, only because it's bugged me for a while now.

Anyone with a Rhod400 on Sprint (or Boost better still), can you check something?

Go to Settings -> About phone -> Status and then scroll down to "Mobile network type".

Post up what is listed, because either my phone is stuck in EvDo Rev. 0 mode or the network mode is incorrectly reported by the ROM.

Mine specifically says CDMA-EvDo rev. 0

Silly I know, but curiosity hasn't killed this cat yet.
Reply With Quote
  #1259 (permalink)  
Old 02-19-2012, 12:57 AM
arrrghhh's Avatar
Testing Extraordinaire
Offline
Pocket PC: HTC Touch Pro 2 (RHOD400)
Carrier: Sprint
 
Join Date: Mar 2007
Posts: 3,604
Reputation: 7360
arrrghhh is a trusted member of the communityarrrghhh is a trusted member of the communityarrrghhh is a trusted member of the communityarrrghhh is a trusted member of the communityarrrghhh is a trusted member of the communityarrrghhh is a trusted member of the communityarrrghhh is a trusted member of the communityarrrghhh is a trusted member of the communityarrrghhh is a trusted member of the communityarrrghhh is a trusted member of the communityarrrghhh is a trusted member of the community
Mentioned: 7 Post(s)
Tagged: 0 Thread(s)
Re: [TESTING] - NAND OMGB (1.2.3)

Quote:
Originally Posted by mbellot View Post
Slightly OT question/request here, only because it's bugged me for a while now.

Anyone with a Rhod400 on Sprint (or Boost better still), can you check something?

Go to Settings -> About phone -> Status and then scroll down to "Mobile network type".

Post up what is listed, because either my phone is stuck in EvDo Rev. 0 mode or the network mode is incorrectly reported by the ROM.

Mine specifically says CDMA-EvDo rev. 0

Silly I know, but curiosity hasn't killed this cat yet.
It's been a 'bug' ever since the RIL was setup to work on CDMA. Before I'm amazed it worked at all, but somehow it did. There literally was 0 CDMA code, we were running in some wacky fake GSM mode for a very long time...

Until hyc came along. He fixed a lot of issues with the RIL in respect to GSM, and basically wrote the CDMA code from the ground up. I asked him about it a few times, but he said it's what the radio is reporting... and he can't do anything about it. I couldn't prove otherwise, if the radio logs said it, how could I argue?

Not sure why this never worked right, but it won't limit your speed. The display is cosmetic only. So to be clear - it will display EVDO/1xRTT correctly, but it doesn't seem to distinguish between Rev.0 and Rev.A...
Reply With Quote
This post has been thanked 1 times.
  #1260 (permalink)  
Old 02-19-2012, 01:10 AM
[ACL]'s Avatar
VIP Member
Offline
Pocket PC: tp2
Carrier: Sprint
Threadstarter
Location: NY
 
Join Date: Feb 2010
Posts: 1,534
Reputation: 6350
[ACL] is a trusted member of the community[ACL] is a trusted member of the community[ACL] is a trusted member of the community[ACL] is a trusted member of the community[ACL] is a trusted member of the community[ACL] is a trusted member of the community[ACL] is a trusted member of the community[ACL] is a trusted member of the community[ACL] is a trusted member of the community[ACL] is a trusted member of the community[ACL] is a trusted member of the community
Mentioned: 2 Post(s)
Tagged: 0 Thread(s)
Re: [TESTING] - NAND OMGB (1.2.3)

Quote:
Originally Posted by milda25 View Post
I'm back in the game. I do not know how, but I drained from my battery last a few milliamps, performed the task 29 and recorded LK. Then the phone started charging correctly. I left him half an hour on the charger, then flashed recovery.img, installed OMGB and voala - it works. Eagerly await the update with the new system of charging
Ahh man glad you are back on. I actually purposely drain batts until they can't even power on the phone to test. Ive been doing it for a week now with the new recovery + charger. This is how i get around it with a fully dead batt.

the winmo bootloader can run on usb power, so you can safely flash LK and recovery. Once you have flashed those two, then you need to just unplug usb, pull battery out (wait 2 seconds) and plug back into usb (or wall charger). Led will be orange and will remain orange. New batt charger code will go green after a few hours once it reaches 95%. Then, you are ready to go back into recovery and flash away. The old charge code was good, but never turned the led green or it wouldnt turn off if you unplugged it. Also there was a bug with the speed the cpu was set to make sure we are charging more than draining. That may have caused random reboots in the past, but so far I haven't seen it in my new tests.

I just ground up some fresh coffee, made myself a nice double shot espresso and ready to write some code.
__________________
Reply With Quote
Reply

  PPCGeeks > Windows Mobile > WM HTC Devices > HTC Touch Pro 2 > Android On TP2 > Android On TP2 Development


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


All times are GMT -4. The time now is 06:03 PM.


Powered by vBulletin® ©2000 - 2024, Jelsoft Enterprises Ltd.
Content Relevant URLs by vBSEO 3.6.0
©2012 - PPCGeeks.com