Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

23037 with normal refinements plus added mstag back in cause it was missing
http://www.4shared.com/file/12814766...b37/23037.html

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

i want to change attributes before kitchen run If u have batch file for that plz share it.

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

It's attached to the bottom of this post here ->http://forum.ppcgeeks.com/showpost.p...postcount=7065

Just check the notes at the top for usage.

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Just thought I would try and save you some work joojoobee666! If it wouldn't be too much trouble would you also be able to post your VK files for the builds too lol

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

I can, but my VK files are 192DPI only. It appears most of the guys that use my PPCKitchen files for other kitchens use them for 96DPI devices which I don't have a VK kitchen for :drunken:

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

<p>Thank you for providing this data for we the owners of a device that is old but dependable.</p>

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

I second the thanks from owners that rock the old but dependable devices :mrgreen:

also, joojoo, haven't had the time yet to get too in depth, but will i have a more strenuous task ahead of me than simply using the batch file to add VK attributes if i plan on utilizing the jdume Titan kitch? is that designed for a different specific VK, or only 192's??

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

I'm not real clear on what the question is. If you are referring to the batch file design , it applies to all DPI based SYS's and will work on any folder. In VK, the SYS is divided into subfolders for each build (i.e. 23034, 23037) and each of those has three more subfolders for splitting out the Common, Langs and DPI specific stuff (each of those have two more subfolders called COMMON and 0409). Some other kitchens don't do this and EVERYTHING is dumped in to one folder. This script just needs to be run on the root folder with all the SYS stuff. Whether or not they are divided into subfolders under that doesn't matter. So if you were using a VK based kitchen, you would just run the batch file on the SYS\##### folder where ##### = build number.

Again, this batch file ONLY needs to be run on the SYS if you used the PPCkitchen files I posted as the sys base, otherwise this doesn't need to be done as the source files that come from Da_G and most everyone else already has the attributes set properly.

Does that clear it up?

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Fot those who use Bepe's platformrebuilder kitchen, and needs to add the attributes to the files, here is the BulidROM.bat, prepared for that. This is intended for a Temp/dump folders in the root of the kitchen. If not, edit the file to the correct patch.

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

joojoobee666 one stop shoping for all builds unoffcial!

Just a thouht, since it seems alot of people including myself have moved over to Erv VK, do you think you might include a link to msxip kernal for the new builds as they come out? I know someone somewhere usually links to it but it seems more and more people are using your files for VK. You already do sooo much for this comunity if this is a pain feel free to slap me with a dead fish.

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

That answered my Q bout the batch file functionality, now I think I just need a better understanding of how the kitchen works. the kitchen I'm plannin on using, unless neone has better suggestions, is

"Wm6.5 Visual Kitchen!!!!! Ok this is an all new kitchen and way better than the other one, Its the same kitchen that DA-G uses over at XDA witch is where we get all these wm6.5 builds. It will take some getting use to but its well worth it trust me"

that jdume put up a while back which appears to be ervius based, supposedly derived specifically for the Titan, which is why i thought it'd be a good idea. don't know if there's something newer/better tho. also i have some research to do to understand how to port, patch, n work with xip's/msxip kernal jazz for this,

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

hehe...guess i was just thinking mostly for myself on that once since i would need the 192DPI files too lol

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Hey guys: anyone knows where i can look for a tutorial or something to start in change the 192DPI files (for example) to 96DPI files?
I was googeling without any result, and searching the forums....

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Apparently, Da_G has created his own utilities to do that. He has not given them out as far as I know. Other than that, I don't know.

On a completely unrelated note, I believe I was finally able to port XIPs using nothing but the RAW MSXIPKernel files. (no true xip.bin as donor) I will test on my Touch Pro when I get a chance. The good news on this is that sometimes, we don't get a nice little XIP for porting with a release, and the XIP's that platformrebuilder creates do NOT port well at all. This is good news for PPCKitchen users who don't get a build due to lack of XIP. :headbang:

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

can neone help me out with 21844 titan oem/msxipkernel while i'm attempting to learn and comprehend the complexity

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Exactly what do you need help with? Indagroove has a nice little post about xips over at everythingdiamond.com ->http://www.everythingdiamond.info/sh...79&postcount=2

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

thanks for all your help in the past if you need someone to test this with a titan shoot me a line.

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Actually, I just cooked ROM up on my Touch Pro with one of the manually ported XIPs from nothing but the MSIXIPKernel and it booted! So, gimme a sec, and I'll post a Titan XIP. It's for 23030, but I used 23028 as the SYS base with no problem. I deleted my 23030 SYS base so that's why I used the 23028. But if you still have 23030, use that.

I'll post a Titan for 23030 in a minute here on this post, If you want to check it, that would be cool.

UPDATE: Ok, here it is. Just edit your PPCK build files accordingly :D

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

that'll help. i was just wondering if neone had one made up already.
anyone else running 21844? if so what's your take on it. seems extremely speedy but can't tell if there's a bad memory leak or not.

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Appears to work here Keep up the great work

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Thanks for verifying that for me, that seals the deal!:headbang:

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

can/does it need to, the msxipkernel be spinlocked for VK??

@joojoo, i put the sys attributes fixer uper in sys root, n drug the 21844 folder into it. upon this, i got a whole bunk of could not finds.... still work, just goofy, or defiantly puking n me doin somthing incorrect? also, starting to get a handle on the xip thing. correct me if i'm wrong, but getting the 21844 msxipkernel from the gene forum is not a problem at all right? if i used a gene oemxipkernel, i'd brick right?

and i just saw 21847's common n xip over at the gene forum too, neone know what's goin on with that??

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

JooJoo, does this mean that the 23037 files will use the new xip now?

Thanks

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Is anyone having major performance issues with the 23xxx series of 6.5. Any build i cook into my rom has a huge lag, as in with 6.1, i click a button, and boom it does its thing. In 6.5, I click, and its 10-30 seconds to do its thing. Any ideas. I have recmodded to keep slot 0 empty, as I have no 6.5 nk.exe. Im stuck....

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

23xxx builds are actually faster than any other 6.5 for me. There could be so many things causing the lag, its hard to say since i dont know what kitchen your using what oems, etc.
Best way is to cook a bare rom, with no added apps, then start adding things back in and see if you can narrow down the cause of the lag.
Also are you recmoding Netcf browsing browsingcore adobeflash and the other required ones? Also optimizing your xip will help a lot.
have any other 6.5 sys ran fine for you?

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Well i wont say its that slow for me, even on my 201 Mhz Omap 850 based Gene. But yes, the 23xxx branch is a bit heavy on memory and slow in performance if compared to 218xx, the COM2 branch. Right now, the builds 21840 and 21844 have snappier performance and it seems that since feature list is complete for this branch with no additions or removal of features taking place, the builds are being optimized now for performance. Its getting better with each build. So if you want the highest performance possible with WM 6.5, try COM2 branch builds. These dont have the new UI features that have now appeared in COM3, but you'll get your speed, i hope. :)

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

That's normal as far as the errors on the batch file. It's set to look for certain file names, some can probably be removed (like the manilla lines, since Touch Flo won't be in the SYS). Safely ignore :)

As far as the MSXIPKernel, it doesn't matter WHERE/WHAT device you grab it from, but using the OEMXIPKernel will more than likely not brick your device, but just won't work. Better to just not try it though ;)

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

No, nothing changes on the XIP's, it's just that I can now get them created without a donor xip.bin. I can make them with nothing but the MSXIPKernel files.

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

i was wondering what you meant by optimizing the XIP. how do you do that?

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

A few things you can do that I am aware of (I know the question wasn't directed at me;). One is to remove unnecessary modules to make it smaller. The next thing you can do is pack the XIP by tightening all the free space and relocating nk.exe and messing with the romhdr.bin. There are some other things I have seen people doing such as compressing the XIP but I haven't looked a whole lot into that.

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

http://forum.xda-developers.com/show...03#post2919603
check that thread out, theres a lot of useful info there about XIP's

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

JooJoo something new today?

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

I am running it on my Titan and like it a lot. Yes, it does seem speedier to me also. I don't notice a memory leak.

I think I am going to stick with the COM2 releases. I don't like the larger buttons on my small Titan screen.

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Does anybody care to put a zip file with all the needed files for Touch Pro (Sprint CDMA)?

There are files everywhere and 740 pages, it's going to take me years to figure it out! LOL

EDIT: Trying out the Unofficial PPCKitchen files & reconfiguring PPCKitchen... Thanks joojoobee666!

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Not today :( I had to much work during the day. Now, I'm out to dinner with wife, after that we go to the club. But maybe some 21847 or 23405 tomorrow if anyone wants and time permits :)

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

Not a problem here.
If I were working as hard as you, I would have to hire a designated driver.
Enjoy your rare free time...

And thank you again for your dedicated effort to our cause..

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

I tried the unofficial ppckitchen files but phone won't boot. It sits on Touch Pro screen and after 10 to 15 seconds it reboots. Any ideas?

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

I would greatly appreciate the PPCK files for 21847 if you have time. And, of course, if your wife will allow you to work on the computer tomorrow.

Thanks again for all you do.

Jeff

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

21847 would be great when you get a chance.

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition
 

What build are you using?
Check out this quick tutorial I came up with.
Had some help from joojoobee666 with adding the XIP to the core.rar.
And make sure that the in the BuildBases txt you hit ENTER just once after the last ] symbol.
That last empty line makes a big difference.

Hope this helps.:headbang: