Change your carrier logo banner! - Page 5

Q_Q · #41 (**permalink**) 01-28-2010, 05:20 PM

Quote:

Originally Posted by SecretAgentMan

If you are running a stock 6.1 manila, your logo is contained in \Windows\443d5315_manila. I'm guessing that Brent372's cab is replacing that file. (I haven't looked at the cab . . . Brent . . pls correct me if I am wrong.) If you don't have that file in \Windows, I'm guessing that Brent's cab won't work, at least for now. As Brent pointed out, if there is no file to replace, then it's probably not referenced by whatever is supposed to point at it (<<-- vague statement . . lol).

If you're running 6.5 (MightyROM, etc), there is no 443d5315_manila file, and simply adding it won't work. I think that the logo is coded in another manner. In THIS THREAD , jdmsleepr advised that he looked through 6.5's manila files and couldn't find the logo. (Post 584 and some others before it.) If you're looking for other logos, that thread is a good source.

First of all thanks to Brent for this wonderful cab.

A) I am on stock 6.1 Sprint & had tweaked it with MobileMatt's Fuzeberry theme which has Fuzeberry brand where the SPRINT logo was.

B) So I used Total Commander to look for the 443d5315_manila file and sure enough it didn't find it under the Windows directory nor the entire device directory.

C) Sure that this cab would not install for me but LO & BEHOLD - after installation & rebooting ->>> It popped up & overwrote the Fuzeberry logo.

So maybe Brent has found a workaround & just replace if 443d5315_manila is there or write if it's not there?

Anyhoo, I am happy!

SecretAgentMan · #42 (**permalink**) 01-28-2010, 09:31 PM

Quote:

Originally Posted by Q_Q

First of all thanks to Brent for this wonderful cab.

A) I am on stock 6.1 Sprint & had tweaked it with MobileMatt's Fuzeberry theme which has Fuzeberry brand where the SPRINT logo was.

B) So I used Total Commander to look for the 443d5315_manila file and sure enough it didn't find it under the Windows directory nor the entire device directory.

C) Sure that this cab would not install for me but LO & BEHOLD - after installation & rebooting ->>> It popped up & overwrote the Fuzeberry logo.

So maybe Brent has found a workaround & just replace if 443d5315_manila is there or write if it's not there?

Anyhoo, I am happy!

I think that Brent has found a way to fix the "no logo" issue in certain circumstances, but I don't want to speak for him. I think he needs a mode9 file from the user to fix it, though.

Is it possible in your case that maybe you just missed the 443d . . . Doesn't really matter now, though, since you got it working. You should be good to go from here on out should you decide you want to change your logo. I'll bet that any of those cabs in the thread I referenced above will work for you!

brent372 · #43 (**permalink**) 01-28-2010, 10:13 PM

There is a fix, sort of.
We can get the logo to show up, but the Network Name moves from the left side of the screen to the right side, under the logo.
I do not know why, and the people I have asked for assistance have been unresponsive

Q_Q · #44 (**permalink**) 01-31-2010, 11:57 PM

Quote:

Originally Posted by SecretAgentMan

I think that Brent has found a way to fix the "no logo" issue in certain circumstances, but I don't want to speak for him. I think he needs a mode9 file from the user to fix it, though.

Is it possible in your case that maybe you just missed the 443d . . . Doesn't really matter now, though, since you got it working. You should be good to go from here on out should you decide you want to change your logo. I'll bet that any of those cabs in the thread I referenced above will work for you!

Well I spoke tooo soon.
The Brent's logo shows up great & in position but it caused the phone to lock up &/or hang.
I couldn't select any icons or programs even with TF3D off.

So, I uninstalled it & the phone came back to normal.

SecretAgentMan · #45 (**permalink**) 02-01-2010, 09:31 PM

Quote:

Originally Posted by Q_Q

Well I spoke tooo soon.
The Brent's logo shows up great & in position but it caused the phone to lock up &/or hang.
I couldn't select any icons or programs even with TF3D off.

So, I uninstalled it & the phone came back to normal.

Maybe you can jump into a Fuzeberry thread and see if you can figure out (or if anyone knows) which manila file contains the logo you want to replace. We might be able to figure something out if you can identify the file. It can be more complicated than that, of course, but at least it's a starting point.

brent372 · #46 (**permalink**) 02-01-2010, 10:04 PM

Nothing in the CAB would cause a phone to lock.
It is merly a graphic manila file.

The fix on the other hand, does involve a Mode9 file but still isn't working right.

Young DC · #47 (**permalink**) 02-02-2010, 03:25 PM

can't wait for the fix.....i'm on us cellular

brent372 · #48 (**permalink**) 02-02-2010, 04:25 PM

Sorry to say but I dont know if the "fix" will ever get fixed.
I am not getting much help

bytethegroove · #49 (**permalink**) 02-02-2010, 09:37 PM

what do u need....im on US cellular TP2
I have gotten it work with the carrier name moveing to left as well...
but also the fix kills my clock...shows a half of a line...
how can i help..
Im happy to upload any file u need....although i may need some help locaing specific files...I do know a good amount about electronics

thanks
byte

firefurby · #50 (**permalink**) 02-10-2010, 03:36 PM

I'm on Mr. X ROM and I've installed the Enable Banner CAB posted earlier in this thread. No Carrier Banner Logo showed up, but I figured I would still try using CFC_GUI to transfer over the one I wanted. I try copying over 443d5315_manila to the device, but it's a no go. What am I missing? Thanks!