CHome/Titanium Modifications - Adding Panels - Page 19

**Hafrust** · #1 (**permalink**) 04-11-2009, 09:00 PM

Quote:

Originally Posted by chuggy

Makes perfect sense! Especially after 2 days of tinkering!

lol...yeah, it makes sense after doing it for a while, but I wonder how many people come in here, read the first post, and say WTF....screw that!

lelalouf · #2 (**permalink**) 04-11-2009, 09:17 PM

I've done the tinkering too. I made a device lock panel and a people panel, both show up but people text is invisible. Any ideas why and how I can fix it?

chuggy · #3 (**permalink**) 04-11-2009, 09:25 PM

Once you are done editing the file in configurator, go back in and copy the welcome center GUID and paste it over your "invisible panel" GUID in the security section.

**Hafrust** · #4 (**permalink**) 04-11-2009, 08:56 PM

Good stuff man...thanks for adding that! It should make it a little easier for people with more specific instructions.

**Hafrust** · #5 (**permalink**) 04-11-2009, 09:23 PM

So I know exactly what's going on, when you say the text is invisible, the panel is there but invisible unless you highlight it? Or did I misunderstand? If that is the case, were you trying to use the same GUID for both panels you created?

lelalouf · #6 (**permalink**) 04-11-2009, 09:33 PM

Yes the panel is there. All my contacts are there and I can call them, but I don't see the text that says people. And I've added it to the ExtensibilityXML.

**Hafrust** · #7 (**permalink**) 04-11-2009, 09:29 PM

Not off hand...but I'll look for it. Is it just certain icons, or all of them?

Edit: All of the default icons I have are .png's that are 60x60.

**Hafrust** · #8 (**permalink**) 04-11-2009, 09:37 PM

Did you try copying the GUID from the welcomecenter panel as chuggy mentioned?

lelalouf · #9 (**permalink**) 04-11-2009, 10:14 PM

yes, I am using the welcomecenter GUID for both panels I created?

**Hafrust** · #10 (**permalink**) 04-11-2009, 10:23 PM

Alright, I see. The GUID for welcomecenter can only be used for one active panel at a time, otherwise it will cause the problem you are seeing. If you are using a VGA device, you can use the CPR files attached in the first post and use the GUID from the settings panel as well, instead of using the welcomecenter GUID twice. If you have a QVGA device, then unfortunately there aren't any CPR's posted in this thread for your device that have the information for the settings panel.