Hard-SPL - Flashing ROMs - Titan Unlocker - Click Here!

[robisonjon2891]

im using the 2.09 rom with the 1.32 radio i have the file for the 1.40 radio i cant figure out how to update my 6800 or if i can will some one point me in the right direstion so i dont brick my phone

[jamesus]

Well...you're in the right thread. Install the unlocker and then you will be able to flash the 1.40 radio.

[KDiz]

I'm not getting this to work. I've followed all the steps and when I get to the progress bar, it goes from 0% to 100% in about 5 seconds. It continues as if it completed the install and I get the error message below. I've tried creating F:\TempTtn folder before running the unlocker and still doesn't work. Am I missing something? Running XP btw.

Unhandled exceptin has occurred in your application. If you click Continue, the application will ignore this error and attempt to continue. If you click Quit, the application will close immediately.
The process cannot access the file 'F:\TempTtn' because it is being used by another process.
--------
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.IO.IOException: The process cannot access the file 'F:\TempTtn' because it is being used by another process.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.Directory.DeleteHelper(String fullPath, String userPath, Boolean recursive)
at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive)
at TitanUnlocker.Form1.button1_Click(Object sender, EventArgs e)
at System.Windows.Forms.Control.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnMouseUp(MouseEventAr gs mevent)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ButtonBase.WndProc(Message& m)
at System.Windows.Forms.Button.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.O nMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.W ndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.832 (QFE.050727-8300)
CodeBase: file:///C:/WINDOWS/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
TitanUnlocker
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///F:/mogul/ROM/TitanUnlocker/TitanUnlocker.exe
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.832 (QFE.050727-8300)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
zip
Assembly Version: 0.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///F:/mogul/ROM/TitanUnlocker/TitanUnlocker.exe
----------------------------------------
TitanUnlocker
Assembly Version: 1.0.0.0
Win32 Version: 1.0.0.0
CodeBase: file:///F:/mogul/ROM/TitanUnlocker/TitanUnlocker.exe
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.832 (QFE.050727-8300)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.832 (QFE.050727-8300)
CodeBase: file:///C:/WINDOWS/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

[tgitchel]

I'm getting the same error as above. Any ideas?

I tried reverting back to the original ROM before flashing the SPL, but no luck.

Edit: Hmmm... actually read all the posts on the XDA site and it seems I have some other things to try

[DiamynzNPearlz]

I am also getting that same error as above but the RUU won't move from 0%. After the Unlocker runs I see "Your device should now be showing an SPL version of 1.10.Olipro..." Instead of 1.12.Olipro... Any suggestions?

edit: found my answer in the chat!

[Igor Sotelo]

Does anyone knows if it's possible, and how, to unlock the Sprint PPC-6800 for use with other 800 MHz CDMA provider?

[Lecithin]

Verizon is going to start taking phones from other providers or so their webpage says. They will do the unlocking and testing of the device themselves. But normally a cellphone company won't activate the cellphone of another company. (Honor among thieves)

[Igor Sotelo]

Thank you for the information, it seems that the cellular band CDMA radio could be activated.

I'm not in the US, I guess all would go much easier otherwise. Locally, my CDMA provider runs at the 800 MHz band, no CDMA phones are sold anymore and the service is used only for Data Cards, none of which can fit in my UMPC. In the end, I have agreed to buy a gray market PPC-6800.

Searching on the Internet, I have seen some registry modifications for the PPC-6800:

HKEY_LOCAL_MACHINE\Security\Policies\Policies\0000 1001 = 2
-> Change the value data from 2 to 1
HKEY_LOCAL_MACHINE\Security\Policies\Policies\0000 1005 = 16
-> Change the value data from 16 to 40
HKEY_LOCAL_MACHINE\Security\Policies\Policies\0000 1017 = 128
-> Change the value data from 128 to 144
HKEY_LOCAL_MACHINE \Security\Policies\Policies
-> Add new value "0000101b": Dword = 1

However, I'm not sure if somebody has tested the procedure on the PPC-6800 or has other procedure that positively works. Since I have agreed to buy the P/PC but haven't received it yet and given the complications, there is a possibility to change or cancel the purchase.

I will appreciate any additional information.

[Tregrad]

NO JOY HERE!!!!!

get this error message:

file or assembly name 'System,
Version=2.0.0.0, Culture=neutral,
PublicKeyToken=B77A5C561934E089',
or one of its dependencies, was not
found.

then I hit "Quit" at the bottom of the screen and get this:

.NER CF Initialization Error
The application failed to
load required components.
if the .NET Compact
Framework is installed on a
storage card, please
ensure that this card is in
place and launch the
application again. If this
fails, a re-installation of the .NET Compact Framework
is recommended. Support info: 2147483643
(80000005)

I have a 6800 Titan/mogul with htc home installed etc.


I tired to install it to my pc first and I get another error:

"To run this application, you first must install one of the following versions of the .Net Framework:
v2.0.50727
contact your application publisher for instructions about obtaining the appropriate version of the .Net Framework"

[mexpino6190619]

i gotta say this is the best site i have came across in a long time. all im looking for is the full exe for the iphone theme and the instructions on how to install it. i got all of the other goodies... lol