Officialy Bricked xv6800

[Filipov1982]

Ok, guys thank you very much the quick responses, I was running dcd 2.. I followed all instructions from here: http://forum.ppcgeeks.com/showthread.php?t=17667

There it says you need to run the relocker so I did. After wards, whate ever utility I try to run verizon official rom, olipro2.40, again the relocker, it always says no device connected would you like to try connecting again. I have turned off and turned on usb connections on a xp and vista laptops, still getting it. Only progress is being made by sprint version which at the 11% tells me wrong veder. I tried using the same thing renaming them ti titaimg.nbh and using them with fat32 sd card just stays on the loading screen. I know i am doing something wrong but don't what exactly.

[mikee4fun]

You can try the exit bootloader tool and it technically should boot. Run the exitbootloader and afet it boots just re run the unlocker and then you can flash away. Try it and post back. Link is ftp://up.ppcgeeks.com/Titan/Users/Im...tan_exitbl.rar

[Filipov1982]

I did and says cannot open usb ports, disable active sync, believe have tried it many times and it always says this, and yes usb connections are disabled. Still getting it though. I can see on the tri color screen that it connect and says usb, but still the exit bootloader gets me this message regardless.

[flyers2114]

Originally Posted by Filipov1982

I did and says cannot open usb ports, disable active sync, believe have tried it many times and it always says this, and yes usb connections are disabled. Still getting it though. I can see on the tri color screen that it connect and says usb, but still the exit bootloader gets me this message regardless.

Have you restarted the computer? If so try mtty....hang on I will find it.

[JuJu]

Originally Posted by Filipov1982

Ok, guys thank you very much the quick responses, I was running dcd 2.. I followed all instructions from here: http://forum.ppcgeeks.com/showthread.php?t=17667

There it says you need to run the relocker so I did. After wards, whate ever utility I try to run verizon official rom, olipro2.40, again the relocker, it always says no device connected would you like to try connecting again. I have turned off and turned on usb connections on a xp and vista laptops, still getting it. Only progress is being made by sprint version which at the 11% tells me wrong veder. I tried using the same thing renaming them ti titaimg.nbh and using them with fat32 sd card just stays on the loading screen. I know i am doing something wrong but don't what exactly.

Originally Posted by Filipov1982

How did you get resolved?

I know when this happened to my mogul, I had to flash an older version of the Sprint rom (2.xxx) since the newer one kept quitting on me at 11%. Then after you flash the older version, try flashing the newer one. Don't panic; 9 times out of 10, it isn't bricked.

[flyers2114]

here ya go......


The Titan is different than most other PPCs in many ways, but one is the key to exiting the bootloader. Most devices you connect to it with mtty and run the command "set 14 0" then reset (task 8 works). On the Titan/Mogul/6800 the command is "set 16 0".

[yamus08]

Originally Posted by JuJu

I know when this happened to my mogul, I had to flash an older version of the Sprint rom (2.xxx) since the newer one kept quitting on me at 11%. Then after you flash the older version, try flashing the newer one. Don't panic; 9 times out of 10, it isn't bricked.

Actually, now that you mention it, I did that as well. Just so much in so little time.

[Filipov1982]

Ok guys I finally figured it out, I knew it had something to do with active sync so what I found should be inlcuded in every stickied thread because it solves problems in an instant. the file name is:disconnect active sync and this is the link. http://forum.ppcgeeks.com/attachment...1&d=1193446257

For everyone out there that is having my problems please try it is works( it worked on my Vista). After you run this thing exit bootloader file runs immediately without problems. I am sorry for wasting everyone's time- guys have been very very helpful.
But again if someone knows how to put it on the stickied threads please do as it is what everyone needs when having active sync issues. Thanks again.

[flyers2114]

Originally Posted by Filipov1982

Ok guys I finally figured it out, I knew it had something to do with active sync so what I found shoudl be inlcuded in every stickied thread because it solves problems in an instant. the file name is:disconnect active sync and this is the link. http://forum.ppcgeeks.com/attachment...1&d=1193446257

For everyone out there that is having my problems please try it is works( it worked on my Vista). After you run this thing exit bootloader file runs immediately without problems. I am sorry for wasiting everyone's - guys have been very very helpfull.
But again if someone knows how to put it on the stickied threads please do as it is what everyone needs when having active sync issues. Thanks again.

That was the next one i was gonna send you if mtty didnt work.....glad you are all good now....good luck

[mikee4fun]

Originally Posted by Filipov1982

Ok guys I finally figured it out, I knew it had something to do with active sync so what I found should be inlcuded in every stickied thread because it solves problems in an instant. the file name is:disconnect active sync and this is the link. http://forum.ppcgeeks.com/attachment...1&d=1193446257

For everyone out there that is having my problems please try it is works( it worked on my Vista). After you run this thing exit bootloader file runs immediately without problems. I am sorry for wasting everyone's time- guys have been very very helpful.
But again if someone knows how to put it on the stickied threads please do as it is what everyone needs when having active sync issues. Thanks again.

Glad you got it up bro, been there done that years ago! =P