Qwest rom upgrade to dcd 3.0.1- data works- wifi does not

[puff]

Originally Posted by hd2

When I go into view (##778#) everything seems to be correct except my PRL says 60610 and the PRL capacity default is different. Do you have any thoughts on this?

sounds like a sprint PRL, how do you change the PRL on the mogul?

[bunvilla]

u change the prl by first getting the correct 1 / u'll find here :

http://www.corolada.com/prl/

then u load it into the "My Documents" on your phone / if u have a SD card, u should also copy it there, if the SD card has a folder called "My Documents" copy it in there also/

once that is done go and dial ##775 or ##775# which ever works, and then select edit , then browse and locate prl/

because its alot of info for me to write, i suggest u look up ALL my post regarding qwest, i show u how to EASILY get your SPC code , because GetSpc doesnt work on qwest 6800's.

Plus i think im the only person who copied the original qwest 2.13 rom ,(which u should find a link to in 1 of my posts) i have the 1.47 radio which can be used instead of the 1.39 which isnt as good as the 1.47 anyways
A friend of mine from work bought a mogul yesterday brand new from qwest/ i took it home and during my lunch i upgraded it to radio 3.37 and DCD 3.04 rom ( of coarse i had to load both spl 1.20 and 2.40 at 1 piont / then load a sprint rom upgrade then to desired DCD 3.04)
i used DCD 's kitchen which allowed me to load the qwest customization package, so good luck ive said all im going to say

[puff]

last night i didnt have time to look it up, thanks so it is via ##PRL

Originally Posted by bunvilla

here is how u get the code to unlock the phone to set it up with another carrier but i havent found a way yet to delete the stuff in the extrom/ thats a different issue /hope this helps


HOW TO GET YOUR SPC or MLS CODE from a QWEST/SPRINT 6800 MOGUL easily
Found the post at ppcgeeks which worked excellent for me in getting my spc or mls code

Someone want to verify a different way to get MSL?
I was playing about with my Sprint Mogul and found a couple of ways to get your MSL... They basically both get it the same way, just take different routes to get there.

Two different ways to get MSL:

Method A:

* Change the following registry entries in:
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\ATDbgLog
Enable: 1
LogMode: 1
* Wait a reasonable amount of time and soft-reset (I have noticed that it seems to take longer for this value to take affect, so if you reboot and the registry values are not changed, then you need to do it again and wait longer)
* Check to see that the file \Temp\ATDbg0.txt has been created.
* Return the values back to what they were (most likely 0) waiting the same amount of time as above.
* Look in the ATDbg0.txt file and you should see a log of commands sent to the CDMA radio and there should be something like this somewhere in the file:

Code:

11:9:3 Tx:AT+HTC_RMSL=0\r
11:9:3 Rx:+HTC_RMSL: 354201\r\n0\r
11:9:3 Tx:AT+HTC_ROTKSL=0\r
11:9:3 Rx:+HTC_ROTKSL: 216112\r\n0\r

* The numbers next to the Rx: +HTC_RMSL line should be your MSL... I do not know what the ROTKSL is for, but included it in the snippet incase someone knows.

Method B:

* Start your favorite pocket-pc terminal program (like pocketPutty - http://www.pocketputty.net/)
* Connect to com9 (Putty used default speed of 9600)
* type in AT+HTC_RMSL=0 and hit enter, your MSL will be displayed.
* Soft reset to restore phone functionality

Let me know if it works for you...

Thanks,

Geoff

--------------------------------------------------------------------------
THE FIRST OPTION WORKED EXCELLENT and i didnt have to install anything or take a chance of messing my phone up.
this rocks thought i would share it/ I CANT TAKE CREDIT FOR IT got it from ppcgeeks

http://forum.ppcgeeks.com/showthrea...9&highlight=spc

[hd2]

Originally Posted by bunvilla

u change the prl by first getting the correct 1 / u'll find here :

http://www.corolada.com/prl/

then u load it into the "My Documents" on your phone / if u have a SD card, u should also copy it there, if the SD card has a folder called "My Documents" copy it in there also/

once that is done go and dial ##775 or ##775# which ever works, and then select edit , then browse and locate prl/

because its alot of info for me to write, i suggest u look up ALL my post regarding qwest, i show u how to EASILY get your SPC code , because GetSpc doesnt work on qwest 6800's.

Plus i think im the only person who copied the original qwest 2.13 rom ,(which u should find a link to in 1 of my posts) i have the 1.47 radio which can be used instead of the 1.39 which isnt as good as the 1.47 anyways
A friend of mine from work bought a mogul yesterday brand new from qwest/ i took it home and during my lunch i upgraded it to radio 3.37 and DCD 3.04 rom ( of coarse i had to load both spl 1.20 and 2.40 at 1 piont / then load a sprint rom upgrade then to desired DCD 3.04)
i used DCD 's kitchen which allowed me to load the qwest customization package, so good luck ive said all im going to say

Bunvilla, I did everything you said and now everything on my phone that I have tried i.e. phone/custom ringtones/email works like a charm....It still says Sprint PCS on the Today screen (HTC home customizer) and it won't save my email account settings but it works and that is what counts.

I found your post about the Qwest Rom a few days ago and copied it. I found another one of your posts with a Qwest Radio in it and copied that just in case. Thanks to you I didn't have to start over again.

I'm surprised that when I called Qwest, they said that my MSL code does not change and even verified it in their computer that it was still the same as the first time they gave it to me. After following your instructions I find the code did change. I copied your instructions onto a MSWord file for future reference.

I can't thank you enough. Thank you to those others who jumped in to help also. I wish I could give you all kudos.

Rick