Can't get into bootloader mode (help!!!)

[mrbawm]

I put a rom I made with the official kitchen on my phone and it goes to the splash screen and doesn't go any further. I'm assuming something about the ROM I built was broken. I figure I'd put another ROM on like no2chem 5060 via microSD slot.

When I go into bootloader mode (camera + power + reset) the screen goes black. Nothing.

I've tried hard resetting and taking the battery out.

Am I done?
Please don't flame, I searched hard.

[puff]

When you plug it to computer does it try to search for new drivers? have you tried to reflash stock 3.35? check out -> http://forum.ppcgeeks.com/showthread.php?t=20882

[mrbawm]

Originally Posted by PPC_N00B

When you plug it to computer does it try to search for new drivers? have you tried to reflash stock 3.35? check out -> http://forum.ppcgeeks.com/showthread.php?t=20882

I'm not sure how I'd flash any rom. I can't connect via Activesync and I can't go the microsd route either.

[puff]

Originally Posted by mrbawm

I'm not sure how I'd flash any rom. I can't connect via Activesync and I can't go the microsd route either.

Just start up the RUU - if it recognizes your device, it will flash it. Otherwize it will tell you that it doesn't recognize your device or sumthing like that... dont know the exact verbage.

[mrbawm]

Originally Posted by PPC_N00B

Just start up the RUU - if it recognizes your device, it will flash it. Otherwize it will tell you that it doesn't recognize your device or sumthing like that... dont know the exact verbage.

It tells me I have a connection error

ERROR [260] : CONNECTION

Before it asked me to install new drivers.

[puff]

sounds like you might need a replacement... perhaps someone else has another suggestion, but you have done a lot that was suggested in the thread i linked to...

i briefly scanned thru it again and you might try another battery if you have an extra, or flash from sD card, but other than that, um, looks like you might have device in "download mode"

Originally Posted by ImCoKeMaN

This state is called download mode, i have 2 devices stuck in it and am working on a solution. It appears that the new GPS radios are protected from overwrite and some attempts to revert can cause this situation. My signature shows the way it happened for me.

-> http://forum.ppcgeeks.com/showpost.p...9&postcount=18

[SBR_L3GION]

if you are still getting the install new drivers do that u may end up having to reprogram your number into the phone but it will be worth it not to have a bricked mogul

[mrbawm]

Originally Posted by SBR_L3GION

if you are still getting the install new drivers do that u may end up having to reprogram your number into the phone but it will be worth it not to have a bricked mogul

It's asking for drivers for Data Interface. How would I install those? Does anyone have some?

[SBR_L3GION]

Originally Posted by mrbawm

It's asking for drivers for Data Interface. How would I install those? Does anyone have some?

it should install directly from your phone. here is a process i would do take your battery out for about a minute or 2 then put it back in and hard reset then try and put it in bootloader. and if possible can i get at least close to verbati of what it says.

[mrbawm]

Originally Posted by SBR_L3GION

it should install directly from your phone. here is a process i would do take your battery out for about a minute or 2 then put it back in and hard reset then try and put it in bootloader. and if possible can i get at least close to verbati of what it says.

OK I took the battery out for 2 mins. Hard reset. Then I pressed (camera + power + reset). Screen is completely black. That's it.