Titan Kitchen CE OS 5.2.19209 (Build 19209.1.0.2) aka 5060

[tiermann]

No2Chem 5060

This is available through the Updater.

(You must unlock your device (Olipro 2.40) and upgrade radio (3.35.04 Radio) to flash ROMS built from this kitchen)
(For best results, run hard spl (unlocker), flash the radio, and then you are ready for a custom kitchen ROM.)


This kitchen is from the No2chem 5060 basekit (WM6.1).

Again, this is brought to you by the PPCGeeks Kitchen Team:
Helmi_C, luv2chill, Tiermann, gguruusa, Naiga , Colonel, and ImCoKeMaN.

The kitchen has been completely reworked again to enhance new features, that we can assure all geeks would love.


Supported device:
All Titan/6800 variants.


Thanks Part:
General:

MAMAICH
Bepe, itsme, tadzio, Misar, cmonex, No2chem

Titan Device:

Special thanks go to these people for their help with regards to donating, troubleshooting and just plain being friends when it mattered the most.
No2chem , Nexvision , LennySh , Pierocksmysocks , DogGuy , and Wideawake (mike) for the site.
and all of you guys at ppcgeeks.com! and all of the donators.
We sincerely cannot list everybody cos it is hard to keep track so please do not feel disheartened or left out if your name is not listed...

Disclaimer:
This Kitchen is free to use but at your own risk, We take no responsibility for any conflict, fault, or damage caused to your phone by this upgrading procedure. No warranties of any kind are given. Any commercial usage prohibited.



This version of the PPCGeeks kitchen has a different structure than prior (WM5/6) kitchens. It was designed to be a one-stop shop for building a ROM and flashing it.

Here are the important things in the install directory:

\SplashImages Splash screens. Please place additional images in the appropriate folder(s).
\USER_OEM where you put any personal OEMs you wish to add to the kitchen (for experienced users).
\Kitchens Where the kitchens are installed to.
\Projects Where the various selections.txt files are located.
BuildOS_Config.txt Don't mess with it unless you know what you're doing.

The Kitchen (Updated 04/19/08 )
http://ppckitchen.org

BuildOS Installer

Installation Instructions

Please read the instruction file (tips.txt in the kitchen), and search the forum before you ask something, and please do report bug if you find any, or even better, post a solution for the bug to make the kitchen team life easier..


happy cooking!
PPCGeeks Kitchen team

Ignore the WMWifiRouter message when it pops up.



Now available from the Updater:
(Please update one item at a time until the updater bug is fixed)

BuildOS:
-ROM Calc Size updated.
-Added firewall/proxy support.
-Fixed first item in Splash dropdowns not working.
-Added Startup Animation selection for supported devices. (Requires still that you choose "Startup Animation" when building.)
-You can browse the online splash/animation and OEM screenshot libraries through the View menu.
-RUU now run from temp to eliminate Run As Admin requirement.
-Fixed group sorting (was sensitive to capitalization)
-Removed SQL server connection
-Removed MDAC requirement
-Minimum username length reduced to 3 characters
-Updated OEMizer to 1.3.9
-Email (optional) added to login screen. Donaters, please enter the email address you used to donate.


Titan (5060):
-Repeat buttonpress fix added.
-IR Beaming fixed
-Cricket, IUSACell, Telecom NZ carriers added.
-HTC Sliding Sound moved to PPCGeeks_OEM because it will be re-used on other devices later.

OEMs and Shareware:
-WeatherPanel removed for now
-Fixed duplicate files in BatteryStatus
-BatteryStatus and TodayClock exclude eachother due to reported conflicts.
-Fixed Touch Keyboard.
-Ultimate Launcher changed to english.


New donation url: http://ppckitchen.org/pp/paypal.php
The form on http://ppckitchen.org will work also.
Please enter the email address you've used to donate when logging in to buildOS.



Any questions about the DCD Kitchen pack made to work with buildOS can be directed to DCD or paynej in it's own thread.

[InvincibleLiving]

Thanks for the update... but i cant the kitchens because they require an internet connection.... you guys dont suppose you might wanna change that just for me? lol

[rickjames00]

Quick Question....

Just ran the updater for the BuildOS program and there were new updates available mainly the add for Titan_No2Chem_5060_WM6.1
When i open the kitchen its saying it cant open Titan_No2Chem_5060_WM6.1.rar and when i hit ok it starts to load and then tells me that this required module is not in project:
Module : WMWifiRouter
Ref: ed0ab1a4-a456-4fb0-ad9d-93feccf351a3

Any suggestions please?

Thanks

[tiermann]

Yeah.. i'm working on those internetless downloads right now.
Just don't know what I'm gonna do with all the cash afterwards, hehe.

[puff]

Originally Posted by nautica2450

Thanks for the update... but i cant the kitchens because they require an internet connection.... you guys dont suppose you might wanna change that just for me? lol

but of course, but only cuz its you [/end sarcasm]

[puff]

Originally Posted by rickjames00

Quick Question....

Just ran the updater for the BuildOS program and there were new updates available mainly the add for Titan_No2Chem_5060_WM6.1
When i open the kitchen its saying it cant open Titan_No2Chem_5060_WM6.1.rar and when i hit ok it starts to load and then tells me that this required module is not in project:
Module : WMWifiRouter
Ref: ed0ab1a4-a456-4fb0-ad9d-93feccf351a3

Any suggestions please?

Thanks

No Idea, i havent tried it yet, just found this thread... quick question or 2 - does anyone know if there's still issues w/ the bluetooth and beam? any other known bugs?

[InvincibleLiving]

Originally Posted by PPC_N00B

but of course, but only cuz its you [/end sarcasm]

sweet, see guys all you gotta do is ask nicely!

[tiermann]

Originally Posted by rickjames00

Quick Question....

Just ran the updater for the BuildOS program and there were new updates available mainly the add for Titan_No2Chem_5060_WM6.1
When i open the kitchen its saying it cant open Titan_No2Chem_5060_WM6.1.rar and when i hit ok it starts to load and then tells me that this required module is not in project:
Module : WMWifiRouter
Ref: ed0ab1a4-a456-4fb0-ad9d-93feccf351a3

Any suggestions please?

Thanks

The warning for WMWifirouter is because internet sharing is required. The UID is probably different in this version, but just remember to choose Internet Sharing.
If you've successfully updated, you may need the fixed selections.txt which i've just put up.

http://ppckitchen.org/downloads/Tita...Selections.txt

Replace the one already in C:\Program Files\PPCKitchen.org\BuildOS\Projects

[tiermann]

Originally Posted by PPC_N00B

No Idea, i havent tried it yet, just found this thread... quick question or 2 - does anyone know if there's still issues w/ the bluetooth and beam? any other known bugs?

Fixed.

If you have old settings to turn off beam in your personal oem you'll want to take that out because it does break beam.

WM6.1 uses the ObexServiceMask entry instead of IsEnabled now to control the on/off checkbox. IsEnabled now controls wether the service is actually loaded at all.

Another thing we noticed is that while autorun is running, it will go into flight mode. After autorun, it goes back to normal.

Other than that, we'll wait for reports.

[puff]

Originally Posted by nautica2450

sweet, see guys all you gotta do is ask nicely!

Originally Posted by nautica2450

Thanks for updating you guys are doing great work with this kitchen.

i couldnt agree more, great work!!!