An Easy Guide to Upgrading

[Geckotek]

Originally Posted by bugs9477

2. Get your EPST
> a. download this file here .. this is the getspl file (in zip form)
> b. This program GETSPC.exe is very simple to use.
>>>>run the GetSPC.exe on your phone and in the Input field
>>>>type in your ESN(Hex) in the input field (you wrote this down earlier)
> c. press <go>
> d. the number produced in the output field is your MSLNumber (EPST unlock code)
> e. exit the application


When I run GETSPC.exe I type in my Hex ESN press go and I get the unlock code, But when I type it in the unlock box and hit ok it says code failed please input again.

I typed it in with caps in getspc, it is a fresh hard reset, stock everything no dialers no customs what am I missing?

Telus HTC P4000 Stock WM6 PRO!

That's because the OP fails to mention that these instructions are really Sprint specific.

[Geckotek]

Originally Posted by bugs9477

I also for ****s and giggles tried running the official sprint rom it says invalid vender ID and fails!

and answers to this!

I would do a search on here for the word Telus to read about other user's experiences and what specific settings should be such as the MSL, but these directions should help you past that error.

http://forum.ppcgeeks.com/showthread.php?t=21167

The are tested on Verizon, but should work for any non-Verizon carrier that doesn't need a specific MSL code set on their PST (just uses 000000) and doesn't require the IOTA cab.

[bugs9477]

If GETSPC or MSL Generator is not getting you the right MSL # to unlock your P4000, IT WON'T. My ESN(HEX) # had nothing to do with my MSL # 12hours of vigorous searching presented me with this!

Posted here http://forum.ppcgeeks.com/showthread...204#post126204 BY bunvilla>>>>>>THANK YOU <<<<<<<

* Change the following registry entries in:
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\ATDbgLog
Enable: 1
LogMode: 1
* Wait a reasonable amount of time and soft-reset (I have noticed that it seems to take longer for this value to take affect, so if you reboot and the registry values are not changed, then you need to do it again and wait longer)
* Check to see that the file \Temp\ATDbg0.txt has been created.
* Return the values back to what they were (most likely 0) waiting the same amount of time as above.
* Look in the ATDbg0.txt file and you should see a log of commands sent to the CDMA radio and there should be something like this somewhere in the file:

Mine was the entry #71
11:9:3 Rx:+HTC_RMSL: ######\r\n0\r the "######" is your MSL to unlock your P4000

[Geckotek]

Originally Posted by bugs9477

If GETSPC or MSL Generator is not getting you the right MSL # to unlock your P4000, IT WON'T. My ESN(HEX) # had nothing to do with my MSL # 12hours of vigorous searching presented me with this!

Posted here http://forum.ppcgeeks.com/showthread...204#post126204 BY bunvilla>>>>>>THANK YOU <<<<<<<

* Change the following registry entries in:
HKEY_LOCAL_MACHINE\SOFTWARE\HTC\ATDbgLog
Enable: 1
LogMode: 1
* Wait a reasonable amount of time and soft-reset (I have noticed that it seems to take longer for this value to take affect, so if you reboot and the registry values are not changed, then you need to do it again and wait longer)
* Check to see that the file \Temp\ATDbg0.txt has been created.
* Return the values back to what they were (most likely 0) waiting the same amount of time as above.
* Look in the ATDbg0.txt file and you should see a log of commands sent to the CDMA radio and there should be something like this somewhere in the file:

Mine was the entry #71
11:9:3 Rx:+HTC_RMSL: ######\r\n0\r the "######" is your MSL to unlock your P4000

That's great info Bugs!!! Now, is this the way to get the MSL before flashing or is this the way to get the now "corrupted" MSL after flashing to the Sprint ROM?


Edit: If you have success flashing, maybe you should help other Telus users by writing a guide like I did for Verizon. Or if you tell me what changes, I'll add lines to mine for Telus.

[bugs9477]

this is how to get the MSL before Flashing! the sprint rom didn't run not sure yet wy!

[Geckotek]

Originally Posted by bugs9477

this is how to get the MSL before Flashing! the sprint rom didn't run not sure yet wy!

It probably won't run on your stock bootloader. You need the Olipro 2.4.

[bugs9477]

oh, I thought you need the stock bootloader to update with carrier roms and just use olipro for cooked roms!

[Geckotek]

Sprint stock loader works, but not others. It's got to be unlocked to flash a Sprint ROM onto a non-Sprint phone in my experience. I got the same error loading the leaked 3.16 ROM until I loaded Olipro 2.4. That's why these directions need some sort of disclaimer..."SPRINT ONLY" But instead they just say "Easy Guide" Misleading.

[bugs9477]

then your probly right and that would be why it will not update LOL!

Thanks!

[bugs9477]

Im only updating to this to get the radio as there are to many issues with just updating radio by its self as stated in this thread http://forum.xda-developers.com/showthread.php?t=376150 then once I get the radio ill be updating to dcd's titan 3.0.1!