An Easy Guide to Upgrading

[bakntyme]

Originally Posted by rpwallin

I ran the unlocker and the DCD301ROM on my phone. Now, it just goes to the Verizon screen and that’s it. The screen flashes up the stuff below and then just sits at the Verizon screen. Is there anything I can do to get it working again?

M 09
B 03
P ACAAAAM-4070
R 1.30.60
D 3.35

RTFM!

Reading the instructions would probably have helped.

Originally Posted by eehrhard

DCD has released a new ROM based on the 3.35 Sprint Rom.

There are issues installing the new radio on its own so DCD is suggesting that you install the 3.35 ROM first and then use the kitchen.

Get it here:
http://forum.xda-developers.com/showthread.php?t=376150

3/12 - 3.0.1 now availble Changelog in second post on xda link

Originally Posted by dcd1182

There are currently issues loading the radio. At this time, use the kitchen only if you know what you are doing and have managed to get the new radio installed on your own.
...
NO RADIO IS INCLUDED. RADIO 1.XX AND 2.XX ARE NOT COMPATIBLE!!
Radio ROM 3.35.04 is REQUIRED.

Originally Posted by dcd1182

...
At this time, as much as this sucks, this is the most stable method I have found of flashing the radio:

1. If you have not already done so, run the 2.40-olipro unlocker. Your device will again be left in tri-color screen.
2. Flash the official sprint 3.35 update.
3. When the device boots for the first time, do not pass screen calibration. Flash a 3.x.x ROM.

You did not install the new radio first. Assuming that you installed the proper unlocker (Olipro hard-SPL 2.40), you can put your phone into bootloader and start at step 2 immediately above.

[rpwallin]

That's exactly what I did. Put it into bootloader mode, then it did let me install the Sprint ROM, then installed DCD's ROM.

Sorry, I was too tired to post a reply that everything was ok but I appreciate the reply. I read everything you referenced last night and got it back fine without too much problem really.

Thanks

[blkout01]

so when i goto flash i get error 240? what is this?

[justpctech]

Originally Posted by blkout

so when i goto flash i get error 240? what is this?

ERROR [240] : FILE OPEN
When this error message appears, check whether the downloaded image is placed in the directory of RUU. If, for some unknown reason, you find that the ROM image is not located in the RUU folder, you have to download the RUU and retry again.

[thatsgr8]

I just finished updating my Mogul to the sprint ROM on the Qwest network. Thank you EVERYONE who helped. So how do you know if the GPS is working. what functions turn it on or off?

[thatsgr8]

Can anyone please help me with this? Did I install the DCD Qwest 3.0.1 wrong that would cause this?
I ran:
Titan 2.40
Sprint 3.35
DCD Qwest 3.0.1

[bakntyme]

Originally Posted by thatsgr8

Can anyone please help me with this? Did I install the DCD Qwest 3.0.1 wrong that would cause this?
I ran:
Titan 2.40
Sprint 3.35
DCD Qwest 3.0.1

Do you have a specific question or problem with which you need help?

[puff]

Originally Posted by bakntyme

Do you have a specific question or problem with which you need help?

i think this was his problem/question/concern

Originally Posted by thatsgr8

I just finished updating my Mogul to the sprint ROM on the Qwest network. Thank you EVERYONE who helped. So how do you know if the GPS is working. what functions turn it on or off?

um, try an application such as Google Maps that utilizes GPS, maybe?

[NipTuck170]

I'm gonna try this for the first time, so i have a question. in step one, where you copy all you're info, i have one problem. When i go to view info, i don't have a security tab, and i have like 7 M.IP. tabs (settings, default profile, and customer profiles 1-5). i coped all the M.IP. stuff down, so i'm not worred about that, but what about the security part? Do i need that?

[bakntyme]

Originally Posted by NipTuck170

I'm gonna try this for the first time, so i have a question. in step one, where you copy all you're info, i have one problem. When i go to view info, i don't have a security tab, and i have like 7 M.IP. tabs (settings, default profile, and customer profiles 1-5). i coped all the M.IP. stuff down, so i'm not worred about that, but what about the security part? Do i need that?

The security settings do not show in View mode, only in Edit mode after entering the MSL.