|
||||
Re: Titan ReLocker - The Hard-SPL undo option
Maybe if you told us what you did to get the colored lines on your phone we could help you get rid of them. Oh, and telling us those little numbers on the screen might also help.
Last edited by bakntyme; 02-22-2008 at 10:04 PM. |
|
||||
Re: Titan ReLocker - The Hard-SPL undo option
where exactly do i get the Stock Sprint ROM that I would have to flash after relocking the phone?
I am returning a Mogul from Sprint since I am within my 30 days and gettting a Touch instead. Im just afraid they will say something once they get receive it about the Custom ROM. I dont want to HAVE to keep the phone just for that. Thanks. Hugo |
|
||||
Re: Titan ReLocker - The Hard-SPL undo option
You could try the sticky titled: PPC-6800/Titan FAQ's - READ BEFORE POSTING! (10/29) - Official ROMs discussion links!
HTC's site is another option
__________________
Note: 3 Color screen is stuck in bootloader NOT "bricked"; just flash a stock rom exe
Touch Custom rom unlocker Undoing advances in Mogul's since 2007. Titan ReLocker, WM5 roms (don't use w/ gps radio): Telus, TNZ |
|
||||
Re: Titan ReLocker - The Hard-SPL undo option
I'm trying to run the relocker but I haven't had any luck this time.
I ran it with no problems to upgrade to the leaked radio & rom but it's too unstable for me so I'm trying to downgrade back to 2.17 but I keep getting the following error message: cannot load VDM IPX/SPX support. Am I doing something wrong? |
|
||||
Re: Titan ReLocker - The Hard-SPL undo option
Help... I unlocked phone using 2.40 olipro, flashed NexVision's latest (based on DCD 2.31), flashed the 3.27 radio, and booted up fine. I then set MDN and MSID. On reboot my device won't stop rebooting. I can get into the boot loader but on a "normal boot" the OS never starts and just auto reboots. I am trying to revert, but relocker requires the phone to have a running OS. How do I relock and revert to 2.17/1.32 radio without a running OS on the phone? I tried reflashing Nexvision and 3.27 radio and 2.40 bootloader with no change. I also tried flashing 3.16 beta. That only changed the splash screen to HTC Test Only. I also tried flashing from SD with no change. Is there any way I can setup the SD card to get the bootloader to execute the relocker batch? Any help is greatly appreciated.
UPDATE: I resolved my problem. I flashed the stock 2.17 rom from SD card and to my surprise it worked. I would still like an answer to my question though. Since it cannot be repeated enough, I will include instructions for flashing from SD card. 1) Format your Micro SD card Fat32 using a MicroSD card reader. Most are FAT16 be default. FAT16 will NOT work. 2) Make a backup copy of the rom you want to flash and rename it to "TITAIMG.NBH" w/o the quotes. 3) Copy TITAIMG.NBH to the root directory on the MicroSD card using a MicroSD card reader, NOT another phone using ActiveSync. ActiveSync will corrupt the file when copying to the card. 4) Safely remove the MicroSD card reader and put the MicroSD card into your powered down phone (battery removed). 5) Put the battery back in and push the Power ON + Camera + Reset buttons all at the same time. Remove the stylus from the Reset button first, then release the other two buttons. Doing this properly is a pain in the butt. 6) The phone should come up in a grey screen and tell you to push the power button to load the rom. Push the Power ON button and wait until the screen shows that the rom loaded SUCCEEDED. 7) Eject the MicroSD card from the phone and hit the reset button using the stylus. Done I much prefer this method to flashing via USB cable since there is much less that can go wrong. Good luck Will Last edited by akhnaten; 03-03-2008 at 02:08 PM. |
|
||||
Re: Titan ReLocker - The Hard-SPL undo option
Quote:
I have seen posts from one other person where the bootloader screen showed 2.40 but it was apparently not completely installed. |
|
||||
Re: Titan ReLocker - The Hard-SPL undo option
Quote:
You are right. The constant rebooting symptom is a bad 2.40 BL install. After returning to the stock ROM (2.17) I was able to boot and Relocker worked great. I then started the process again and installed both the 3.16 beta and then the NexVision ROM and it works great. Now I just need an updated Radio Thanks for the reply. |
|
||||
Re: Titan ReLocker - The Hard-SPL undo option
quick question...im running one of NO2CHEMS ROMS...and the offical mogul update is duie to come out monday...will i need to run this relocker in order to install that sprint ROM or can i just flash as normal? i have never ran this relocker at all
|
|
|
|