Custom Taskbar

[mgdking]

Originally Posted by tsowen                                
                 You need to the correct driver for the TP2 which is here http://www.nuerom.com/nueDownload/download.aspx?id=166
 
As for the 3G symbol I am not sure what is going on why your phone is reading the wrong icon from the tapres.192.dll tonight I will take a look at the taskbar you have and see what is in there. Check back here in the morning for an update/fix to your problem. Also if you visit the Touch Pro 2 forum and view this thread you will find the battery drivers cab file for the TP2 there also http://forum.ppcgeeks.com/showthread.php?t=78019

tsowen Have you found anything regarding my 3G symbol?

[purian23]

Originally Posted by mgdking

Thanks for your reply that fixed my battery!! Look forward to hearing if you find something out about the 3G thing! Thanks again!! Hit the thanks button for ya!!!!

Originally Posted by mgdking

tsowen any word on the 3G symbol yet?

Originally Posted by mgdking

tsowen have you had a chance to fix the 3G symbol yet?

tsowen Have you found anything regarding my 3G symbol?

Dude I promise Tsowen is not ignoring your many request of the same question, he gets crazy busy at work and has to take some time off of here until it slows down !

[tsowen]

Originally Posted by phatair

HI,

i have a question for the sdkcerts. is it possible to use the version i used with my "old" HD also with the HD2?
Thanks for your help.
Greetings

Yes it will work as well

Originally Posted by ihcc2uni

I am attempting to design my own and have downloaded the files but don't have the ZIP file password, where do I find where that is posted? Thanks!

Check your PM

Originally Posted by mgdking

tsowen any word on the 3G symbol yet?

Check the file below, I am assuming that Verizon is now showing the 3G icon which is like the Ev icon since you are CDMA and not GSM, if you were GSM it would read the 3G icons out of the phcanOverbmp.dll which are there but I think it is reading the tapres.192.dll which contain the CDMA Ev icons so I have swaped them out with the 3G. Give this a go and let me know if it works or not.

Originally Posted by shaba10k

any fix for 3g yet

See the above post.

Originally Posted by Nazert

Hey Guys, I'm sorry if this was asked already somewhere but I'm brand new user and I started to read all the posts but 160 pages.... I just have one simpel question. i recently upgraded to WM6.5 The official version from the HTC website for me HTC Touch Pro 2.
A friend mentioned that there is a cool taskbar from Tsowen which indicates the battery life as it shuold and not as Windows made it .

Ive seeen there are lots different versions, which is the last and most compatible version that I would need to download for my phone WM 6.5 Touch pro 2 and will I need to install any other software or just the task bar cab.

Thanks a lot in advance

http://forum.ppcgeeks.com/showthread.php?t=65911

Originally Posted by purian23

Dude I promise Tsowen is not ignoring your many request of the same question, he gets crazy busy at work and has to take some time off of here until it slows down !

Thanks bro, I have been TDY to Fort Hood for the recent events and just got back into town. Sorry for the delay on everything and thanks for being patient with me here.

[tsowen]

Also I have started making a new taskbar, when i get a few more icons done I will show a preview of a few of them. Might take a little time to make though but it will get done. Have to work some overtime (gotta pay those bills )but I will get it done.

[mgdking]

Check the file below, I am assuming that Verizon is now showing the 3G icon which is like the Ev icon since you are CDMA and not GSM, if you were GSM it would read the 3G icons out of the phcanOverbmp.dll which are there but I think it is reading the tapres.192.dll which contain the CDMA Ev icons so I have swaped them out with the 3G. Give this a go and let me know if it works or not.

That worked perfectly!!!! Thankyou very much!!!! I appreciate you taking the time and doing that for me!!! Your post has been thanked!!!

[tsowen]

Originally Posted by mgdking

Check the file below, I am assuming that Verizon is now showing the 3G icon which is like the Ev icon since you are CDMA and not GSM, if you were GSM it would read the 3G icons out of the phcanOverbmp.dll which are there but I think it is reading the tapres.192.dll which contain the CDMA Ev icons so I have swaped them out with the 3G. Give this a go and let me know if it works or not.

That worked perfectly!!!! Thankyou very much!!!! I appreciate you taking the time and doing that for me!!! Your post has been thanked!!!

Glad we got you all fixed up, also thanks for the donation whoever sent one in! All donations are appreciated!

Hi all,

Sorry if this has been answered elsewhere already, but I can't find any info anywhere!

I'm just starting out with this and looking to create my own set of icons, starting of with a simple Start menu icon, but I've stumbled at the first hurdle. I have been trying to copy "shellres.192.dll.0409.mui" or "shellres.192.dll" to my SD card as per item 2 of 'How to create your own Start icon' on the first page of this thread, but neither Total Commander or Resco Explorer will copy the files, both giving 'access denied' errors.

I do have the WM6.5 stock dll's that I downloaded (from somewhere...) but I've got tsowentaskbar6 WM6.5 version.cab installed, so I was assuming that by copying out the correct .dll's on my device I could use this as a base and add my own edits.

I've got an HD2 if that makes a difference! Any help would be greatly appreciated.

----EDIT!----

Ah - I think I know why! I was trying to copy files that were stored in ROM. I simply copied over the shellres.192.dll, found that this contained tsowen's updated icons and edited the Start icon accordingly. I now have a very nice version of the attached as my Start icon in honour of my 300ZX TT

Long time lurker first time poster here, yes I am a noob. I want to say thanks to everyone in this thread and site for all the valuable input, advice, software, etc. It is much appreciated and will always be.

I tried my best to follow these instructions and am afraid I missed something or was unable to find the fix thru the 160+ posts here. Also below I have listed the info for troubleshooting help.

Originally Posted by tsowen

Speaker and Battery Icon
The Speaker and Battery Icon's are located in the phcanOverbmp.dll file. The following are the steps to change your battery icon and speaker Icon out and to also give you the battery percentage.

1. First install the sdkcerts.cab
2. Install Taskbar%20Icons%20v2.cab
3. Install darklord battery metre v2_fixed.cab
4. To have your battery meter give you actual % such as 33% instead of in increments of 10 install nuePowerDriverCDMADiamond-100-v1.0-cab.cab updated 11/13/08
5. To fix the battery % either use a registry editor and change the settings as posted below or install FInixNOverBatteryIconsOnly.zip (no need to do both) updated 11/11/08
6. To fix the little font when you click the speaker icon install HTCVolumeControl.dll in the attachment below (Thanks opuscroakus) updated 12/5/08

Originally Posted by tsowen

To further expand on what GadgetFreak said and what I have posted several times there are a few things we need in order to properly troubleshoot your problems and they are:

1. Your Phone (HTC Touch Pro or whatever this will also tell us if your QVGA, VGA or WVGA)
2. Your Current ROM (Stock or MightMike 4.7 or whatever)
3. The Taskbar you have installed (tsowentaskbar5v1.7 or whatever)
4. GSM or CDMA
5. Any additional software you are running such as Wisebar or SPB Mobile Shell or anything to this effect. (Some users have reported problems with these two software)
6. The nature of your problem in detail such as I unistalled tsowentaskbar3 and sdkcerts. I then re-installed sdkcerts, tsowentaskbar 6 and nuepowerdriver. When I turn on my bluetooth my icon is still the stock icon. I have checked my /Windows folder and it shows the correct BT On Mode.bmp that is in your taskbar.

1. HTC Fuze
2. Stock ROM
3. I was installing the taskbar above (Taskbar%20Icons%20v2.cab)
4. GSM
5. Nothing major, just all simple aps like "flipclock theme", g-alarm, etc..I can list more if needed.
6. My problem is with the battery % icon, the 100% seems to be scaled down to 20% equaling 100%. I installed the taskbar with the above instructions. After step 3 and a soft reset, the new task bar appeared with the battery icon at 16%(which actually was about 75%) The link in step 4 appears to be an updated version for the TP2 which I did try but did not work. Step 5's link doesn't appears not to work anymore. Step 6 I have not attempted yet, still reading up on it and not comfortable with total commander yet.

Any help on this issue is greatly appreciated. I apologize in advance for leaving out any info needed to help but will reply asap if needed.

[seco10]

Originally Posted by @calpine7

...6. My problem is with the battery % icon, the 100% seems to be scaled down to 20% equaling 100%. I installed the taskbar with the above instructions. After step 3 and a soft reset, the new task bar appeared with the battery icon at 16%(which actually was about 75%) ...

Try to change some Reg-dwords:
[HKLM\security\ResOver\Bitmaps]
"BatteryIconLevels"=dword: 65 (hex) or 101 (dez)
"BatteryIconStart"=dword: 3e9 (hex) or 1001 (dez)
"BaseDLL"=phcanOverbmp.dll
"BaseId"=dword:0
...after this your battery-icon should show the 100% (if the battery is full)

[mgdking]

Originally Posted by tsowen

Glad we got you all fixed up, also thanks for the donation whoever sent one in! All donations are appreciated!

@ tsowen Well since you fixed the EV symbol to make it say 3G I finally went to a place where I know I have always dropped to 1x. Well when I was there my TP2 read just "G" not 1x. Not really a bid deal I guess but wanted to bring it to your attention. So I guess at this point I know if it says just "G" for a signal I am really only getting 1x. Any thoughts on this?