|IMAGIO|¯`·.¸¸.·´¯`·.¸¸.-* Energy *|July 4| 21916|29022 -.¸¸.·´¯`·.¸¸.· Sense 2021

[bawaji]

Originally Posted by DatBoiDame

Sometimes a bad flash can create little issues like this, do u guys use Task29 before flashing? I always use Task29 before flashing & then Clear Storage right after a fresh flash & my issues with ROMs went down 80%

Please let me know the procedure for Task29 before flashing. I know how to clear storage after the flash but do not know how to clear out the memory fully before a new flash. Thanks!

[bawaji]

Originally Posted by DatBoiDame

I unlocked successfully, flashed the March 21st 29017 Standard Energy successfully and data would not work. I dialed *228 option 1 and that did nothing, tried option 2 and still no data. I even filled in my info [10 digit number]@etc.... and that did not work either. So I had to flash back to stock & relock until I could figure out what was going on...

I do not use data (I am on a pay as you go plan) but I turned it on downloaded weather data and it worked properly. Were you able to make calls? If so, was WiFi working? Hope you can figure out the issue. I assume the data was working properly with the Stock ROM. It might just be a settings issue.

The settings on my phone are as follows:
Start > Settings > Connections > Tasks > Manage existing connections
Name = Verizon Wireless, Number = #777,
Username, Password and Domain are empty

You do not need to relock the phone after flashing back to stock. Hope you can unlock it again!

[DatBoiDame]

Originally Posted by bawaji

I do not use data (I am on a pay as you go plan) but I turned it on downloaded weather data and it worked properly. Were you able to make calls? If so, was WiFi working? Hope you can figure out the issue. I assume the data was working properly with the Stock ROM. It might just be a settings issue.

The settings on my phone are as follows:
Start > Settings > Connections > Tasks > Manage existing connections
Name = Verizon Wireless, Number = #777,
Username, Password and Domain are empty

You do not need to relock the phone after flashing back to stock. Hope you can unlock it again!

IDK what was going on. I had the same settings. Wifi was working, Calls were working after *228 & yes data was and is working correctly with stock ROM. To be honest I think it has something to do with the MR2 update as companies are trying to prevent unlocking & custom ROMs. When I get time Im goin to flash to MR1 then unlock & see if that makes a difference but the good thing is that I will be able to unlock again as long as its the same phone

[bawaji]

I have gone back and forth between the MR2 update and Energy and Teya ROMs without any issues. It could just have been a bad flash. Hopefully, flashing again resolves the issue. Good Luck! After trying out the cooked ROMs, I find it really difficult to go back to the stock ROM!

If the problem persists, the only other thing I can think of is to flash to the MR1 update, ensure the data works, and then flash one of the custom ROMs. Maybe that will clear out anything the MR2 update may be doing for you.

Glad to know the HardSPL unlock works on the same phone without having to get hold of the author.

[DatBoiDame]

Unlocked again and flashed the March 21st 29017 Standard Energy & installed Cookie 1.8.5 on it. Everything is running smooth so far. I switched to the Panel Start Menu to gain some more RAM. Unlike the TP2 I boot up with 93MB free but hopefully it hangs around 70MB free like the TP2 did. Let me get everything set up w/ all my cabs & settings & see if everything continues to go smoothly. Then I'll report any issues (if any)

[guerrillah]

Whenever I try to install a rom my device and PC progress bar stay at 0% then it gives me the recovery screen. How do I install it successfully?

[bawaji]

Have you unlocked the phone first using Hard-SPL? The progress bar staying at 0% usually happens when the phone is not yet unlocked.

[DatBoiDame]

Working on 24 hrs and no issues at all, just a little battery drain as expected until the rom settles in. I havent had any lag or anything at all! Now Im gonna play around with the YouTube app to see if I get the out of memory error.

SN: NRG set the PagePool at 18 which seems just fine for a little extra RAM w/o giving up speed. Im going to play around with the PagePool to see how low I can go w/o giving up the speed just so I can gain a little more RAM. With the TP2 & the panel start menu I was able to set the PagePool high at 24 and still boot up with 90MB free and have blazing speed but I know that is not going to happen with this phone lol

[MegaZapFan]

Not April Fools... April 1 builds are up

[DatBoiDame]

Originally Posted by MegaZapFan

Not April Fools... April 1 builds are up

Thanks for the heads up bro! Downloading now! I need to check the changelog to see if I should flash or not