unbrick vogue

[horndoctor]

Originally Posted by csifan29

Haven't unlocked it because it won't connect to Active Sync and I'm not sure there is another way to unlock it if it's not connected?? When I put it in bootloader it says the following:

VOGU100
SPL-2.01.0000
CPLD-11

and at the bottom it says serial until I plug it into my computer and it changes to USB.

You can actually run the unlocker from bootloader. Just download the unlocker and place it in a folder on your pc. Then put your phone in bootloader and wait till it says serial. Then connect with usb wait until it says usb on your device and then go to the unlocker folder and run it. I've heard of other people doing it.

[csifan29]

Originally Posted by horndoctor

You can actually run the unlocker from bootloader. Just download the unlocker and place it in a folder on your pc. Then put your phone in bootloader and wait till it says serial. Then connect with usb wait until it says usb on your device and then go to the unlocker folder and run it. I've heard of other people doing it.

Tried this and it doesn't work, seems like it won't accept any OS.

[csifan29]

Originally Posted by Lmiller1708

You are OK.
Many many people have been in your shoes...
Like whitey said just try to flash again to stock.

Then follow the directions to a T...

Tried to flash stock at least 5 times...

[csifan29]

As I was just rebooting I noticed it said...:

Loading. . .

No Image File!

[horndoctor]

Wirelessly posted (HTC Diamond: Mozilla/4.0 (compatible; MSIE 6.0; Windows CE; IEMobile 7.11) Sprint MP6950SP)

Originally Posted by csifan29

Tried this and it doesn't work, seems like it won't accept any OS.

Extract coke 2.31 to an empty folder. Then put device in bootloader and it should say serial. Then connect to pc and it should say usb. Then run ROMUpdateUtility.exe of the folder you extracted the unlocker to. Just like flashing any custom ROM,only this time you are flashing coke 2.31 unlocker. Process takes 3-5 sec to upgrade from 0% to 100%.
One other question. Did you try to use the .41 unlocker? If so, then you may have to flash a non-gps rom from your storage card. I hope not.

[daowen]

Just followed this thread and wanted to know, how do you put it into boot loader? I have tried to reset and hold power, down volume and send, <-- and the button but nothing.

The first screen shows the following information when booting:

M 03 P ACAAAAM-4070
B 01 R 215.00
P3.03

D

[horndoctor]

Wirelessly posted (HTC Diamond: Mozilla/4.0 (compatible; MSIE 6.0; Windows CE; IEMobile 7.11) Sprint MP6950SP)

Originally Posted by daowen

Just followed this thread and wanted to know, how do you put it into boot loader? I have tried to reset and hold power, down volume and send, <-- and the button but nothing.

The first screen shows the following information when booting:

M 03 P ACAAAAM-4070
B 01 R 215.00
P3.03

D

Press and hold Power & Camera buttons and push the stylus into the reset hole.

[tmz]

Or just put this anywhere on you phone even the card and give it a tap. Oh on zip it first....

Thanks T M Z

[daowen]

Perfect!

Now to see what can be done.

Regards,

D