PPCGeeks
Page 7 of 11 « First 56 7 89 Last »
Show 40 post(s) from this thread on one page

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   HTC Vogue Development (http://forum.ppcgeeks.com/forumdisplay.php?f=59)
-   -   [ROM][Finished 4/28/10]NagROM Touch[WM6.5.5 Build 23551][V0.19 Bare & V3.19 Manila] (http://forum.ppcgeeks.com/showthread.php?t=81889)

Lmiller1708 10-18-2009 08:20 PM
Re: [ROM][Updated 10/15/09]NagROM[WM6.5.1 Build 23071][V0.11 & V3.11]
 
Quote:
Originally Posted by Firsttimer (Post 1244849)
I need some help. My HTC Touch touch screen died today. I can still use the phone with its buttons. But then I did a stupid thing... I reloaded the OS to see if the touch screen would come back. NO LUCK. Now my phone is useless because its stuck on the TAP HERE screen.

NagRom, Is there any way you can make a rom that doesn't go through the screen setup program on install? This way I could reload my contacts and use my phone until I decide on which one I want to buy as a replacement. (HD2 if Verizon gets it)

Thank You.

Firsttimer
Google something called My Mobiler. It might work, not for sure with out activesync running though... There is another one called asrdisplay that could work also but still needs to be connected though activesync. :scratch:

All else fails try flashing back to stock...

Good luck!

Firsttimer 10-18-2009 09:03 PM
Re: [ROM][Updated 10/15/09]NagROM[WM6.5.1 Build 23071][V0.11 & V3.11]
 
Thanks Lmiller1708. That kinda worked. It got me to the Align Screen screen but the mouse does not seem to work on this screen. If I can get pasted the alignment screen this program will be a big help.

I could not find the other program you spoke of.

Any other suggestions?????

Thanks again!
FT

PS: Installing athe default OS is what I am in the middle of doing now and is why I am stuck at the Align Screen screen

Lmiller1708 10-18-2009 09:22 PM
Re: [ROM][Updated 10/15/09]NagROM[WM6.5.1 Build 23071][V0.11 & V3.11]
 
1 Attachment(s)
Quote:
Originally Posted by Firsttimer (Post 1244952)
Thanks Lmiller1708. That kinda worked. It got me to the Align Screen screen but the mouse does not seem to work on this screen. If I can get pasted the alignment screen this program will be a big help.

I could not find the other program you spoke of.

Any other suggestions?????

Thanks again!
FT
Try this...
ASRDisp.exe runs on your PC.
cerdisp2.exe run on you PPC. If you can get to your PPC explorer though activesync place cerdisp2.exe in your windows/startup folder reboot And see if that works.
Hope it helps...

Firsttimer 10-18-2009 10:16 PM
Re: [ROM][Updated 10/15/09]NagROM[WM6.5.1 Build 23071][V0.11 & V3.11]
 
That one doesn't work at all. It can't figure out what the OS is. I need a special OS install tthat does not need to align the screen to pointer app running durning the install. Could one be possible?

hseldon 10-19-2009 09:25 AM
Re: [ROM][Updated 10/15/09]NagROM[WM6.5.1 Build 23071][V0.11 & V3.11]
 
Thanks NagRom for the excellent job!
Some question...
Meybe it's not really about subject ... but may be You help ...
New version [WM6.5.1 Build 23071] have no standard X-Button in the upper right corner of the screen,
it have the large X-Button in the lower right corner, but in this new button not available feature Tap-and-Hold - Close Application (Full close with free memory).
In most cases, I just need to close applications rather than "minimize".
For close application i must load Task Manager and Stop Applcation ... it's absolutely inconvenient.
How to restore a standard X-Button in the upper right corner of the screen or how to teach a new button in the lower right corner Tap-and-hold (Close Application) future?
old programs (HTC X-Button don't working)

-------------
By default, after installation Camera2 fails Camera-Button (wrong link).
I have fix in the registry camera.lnk->camera2.lnk, but it not good for simple users ... needs to fix.

Nagrom Nniuq 10-19-2009 02:16 PM
Re: [ROM][Updated 10/15/09]NagROM[WM6.5.1 Build 23071][V0.11 & V3.11]
 
Quote:
Originally Posted by hseldon (Post 1245592)
Thanks NagRom for the excellent job!
Some question...
Meybe it's not really about subject ... but may be You help ...
New version [WM6.5.1 Build 23071] have no standard X-Button in the upper right corner of the screen,
it have the large X-Button in the lower right corner, but in this new button not available feature Tap-and-Hold - Close Application (Full close with free memory).
In most cases, I just need to close applications rather than "minimize".
For close application i must load Task Manager and Stop Applcation ... it's absolutely inconvenient.
How to restore a standard X-Button in the upper right corner of the screen or how to teach a new button in the lower right corner Tap-and-hold (Close Application) future?
old programs (HTC X-Button don't working)

-------------
By default, after installation Camera2 fails Camera-Button (wrong link).
I have fix in the registry camera.lnk->camera2.lnk, but it not good for simple users ... needs to fix.
If you go back and read this thread your question has been answered about 30 times. The answer is, there is no way to get back what you had before. You must use the task manager (you can try an app calls Showcase but I don't like it). Windows Mobile has build in memory management and it will auto kill apps when it needs memory. So, don't worry about it. Just use your phone and WM will make sure you have enough memory.

Firsttimer 10-19-2009 05:55 PM
Re: [ROM][Updated 10/15/09]NagROM[WM6.5.1 Build 23071][V0.11 & V3.11]
 
My phone, HTC Vouge/Touch's touch screen no longer works. However the phone still does via the buttons. In a effort to find out what the problem was I reinstalled 6.1 on the phone. Now its stuck on the Align Screen part of the install. I have tried two programs, mDesktop & My Mobile (ASRDisp didn't work at al)l, and they get me to the Align Screen part of the app where the cross hairs are in the middle of the screen. Then nothing works.

With mDesktop I can browse my files and pictures and with Mobile Registry Editor I can edit the registry.

To that end, what registry change(s) can I make so that when I power on my phone it will not run the align screen application and finish the installation process?

Once this is done I can at least use my phone via the buttons until I get a replacement phone.

All suggestions are welcome, Thank you in advance.

Lmiller1708 10-19-2009 06:23 PM
Re: [ROM][Updated 10/15/09]NagROM[WM6.5.1 Build 23071][V0.11 & V3.11]
 
Quote:
Originally Posted by Firsttimer (Post 1246720)
My phone, HTC Vouge/Touch's touch screen no longer works. However the phone still does via the buttons. In a effort to find out what the problem was I reinstalled 6.1 on the phone. Now its stuck on the Align Screen part of the install. I have tried two programs, mDesktop & My Mobile (ASRDisp didn't work at al)l, and they get me to the Align Screen part of the app where the cross hairs are in the middle of the screen. Then nothing works.

With mDesktop I can browse my files and pictures and with Mobile Registry Editor I can edit the registry.

To that end, what registry change(s) can I make so that when I power on my phone it will not run the align screen application and finish the installation process?

Once this is done I can at least use my phone via the buttons until I get a replacement phone.

All suggestions are welcome, Thank you in advance.
If you can get to you registry try this:
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"CalibrationData"="2013,2070 3306,3060 3377,957 674,940 688,3067"

These are my settings. Let me know!

brack21 10-19-2009 06:34 PM
Re: [ROM][Updated 10/15/09]NagROM[WM6.5.1 Build 23071][V0.11 & V3.11]
 
Quote:
Originally Posted by hseldon (Post 1245592)
Thanks NagRom for the excellent job!
Some question...
Meybe it's not really about subject ... but may be You help ...
New version [WM6.5.1 Build 23071] have no standard X-Button in the upper right corner of the screen,
it have the large X-Button in the lower right corner, but in this new button not available feature Tap-and-Hold - Close Application (Full close with free memory).
In most cases, I just need to close applications rather than "minimize".
For close application i must load Task Manager and Stop Applcation ... it's absolutely inconvenient.
How to restore a standard X-Button in the upper right corner of the screen or how to teach a new button in the lower right corner Tap-and-hold (Close Application) future?
old programs (HTC X-Button don't working)

-------------
By default, after installation Camera2 fails Camera-Button (wrong link).
I have fix in the registry camera.lnk->camera2.lnk, but it not good for simple users ... needs to fix.
Here is what I did to close apps, I mapped my left soft key on my home page to task.exe and just tap it and close the apps I want to close. Just as simple as tapping the x.

hseldon 10-19-2009 07:31 PM
Re: [ROM][Updated 10/15/09]NagROM[WM6.5.1 Build 23071][V0.11 & V3.11]
 
Thank You Nagrom, brack21...
---
Microsoft Corporation in its traditional sickening repertoire ...

Mark Larson 10-19-2009 08:47 PM
Re: [ROM][Updated 10/15/09]NagROM[WM6.5.1 Build 23071][V0.11 & V3.11]
 
I've been following your ROMs and decided to jump in with 23071. I'm having a few problems though...

1. Dialer is slow to respond and a scrollbar appear on the side - if I scroll down, there's a pattern similar to the Talk/End/Speaker buttons - no buttons, but the pattern is there.
2. If I enter in ##MSL#, dialer shows EPST, but then it quickly exits. Going to the task manager doesn't show EPST.
3. No usable keyboard. Is this by design?
4. No task manager. In my 6.5.1 Touch Pro ROM, there is an invisible task manager overlayed on the clock which is very handy. I see that you talked about this a few posts ago, but thought I'd pass on the info.

Thanks!

EDIT: After following the instructions on XDA and installing the two weather fixes, I no longer get TouchFlo. I just get a message saying "Tap here to launch TouchFlo" and when I tap it, it does something and goes back to the same message.

Nagrom Nniuq 10-20-2009 02:16 AM
Re: [ROM][Updated 10/15/09]NagROM[WM6.5.1 Build 23071][V0.11 & V3.11]
 
Quote:
Originally Posted by Mark Larson (Post 1247128)
I've been following your ROMs and decided to jump in with 23071. I'm having a few problems though...

1. Dialer is slow to respond and a scrollbar appear on the side - if I scroll down, there's a pattern similar to the Talk/End/Speaker buttons - no buttons, but the pattern is there.
2. If I enter in ##MSL#, dialer shows EPST, but then it quickly exits. Going to the task manager doesn't show EPST.
3. No usable keyboard. Is this by design?
4. No task manager. In my 6.5.1 Touch Pro ROM, there is an invisible task manager overlayed on the clock which is very handy. I see that you talked about this a few posts ago, but thought I'd pass on the info.

Thanks!

EDIT: After following the instructions on XDA and installing the two weather fixes, I no longer get TouchFlo. I just get a message saying "Tap here to launch TouchFlo" and when I tap it, it does something and goes back to the same message.
1. You cannot use custom dialer's with this ROM except certain ones specifically designed for 6.5.1. That should be your problem.

2. See 1.

3. Yes, nothing is included. You get your own stuff and make them how you want them.

4. The task manager you have on your pro does not actually close the apps. It just minimizes them. Therefore, I found it pointless to have and removed it.

Your weather problems should be fixed by uninstalling your fixes, then installing the city editor, putting in your city, update your weather, then install the CDMA fix. Then it should all work.

vin255764 10-20-2009 03:17 AM
Re: [ROM][Updated 10/15/09]NagROM[WM6.5.1 Build 23071][V0.11 & V3.11]
 
Quote:
Originally Posted by Mark Larson (Post 1247128)
I've been following your ROMs and decided to jump in with 23071. I'm having a few problems though...
Quote:
Originally Posted by Mark Larson (Post 1247128)
4. No task manager. In my 6.5.1 Touch Pro ROM, there is an invisible task manager overlayed on the clock which is very handy. I see that you talked about this a few posts ago, but thought I'd pass on the info.

Try this: http://forum.xda-developers.com/showthread.php?t=530564
Quote:
Originally Posted by Mark Larson (Post 1247128)
I've been following your ROMs and decided to jump in with 23071. I'm having a few problems though...
Quote:
Originally Posted by Mark Larson (Post 1247128)
2. If I enter in ##MSL#, dialer shows EPST, but then it quickly exits.
Im sure you forgot to install carriers cab.ROM is generic,there is no EPST,no ## codes ,even MSL # is not there.

Mark Larson 10-20-2009 12:13 PM
Re: [ROM][Updated 10/15/09]NagROM[WM6.5.1 Build 23071][V0.11 & V3.11]
 
Yes, I think that was my mistake. I went to another ROM and everything's good now. Thanks anyway!

Firsttimer 10-21-2009 12:24 PM
Re: [ROM][Updated 10/15/09]NagROM[WM6.5.1 Build 23071][V0.11 & V3.11]
 
Quote:
Originally Posted by Lmiller1708 (Post 1246783)
If you can get to you registry try this:
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"CalibrationData"="2013,2070 3306,3060 3377,957 674,940 688,3067"

These are my settings. Let me know!
This did not fix the problem. It still is stuck on the Align Screen screen at start up. My reg settings for the above key are...

[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"CalibrationData"="2013,2070 3306,3060 3377,957 674,940 688,3067"
"MaxCalError"=dword:00000010
"DriverName"="touch.dll"

The CalData key is a Multi-String Value, did is use the correct type? Any other ideas?

Lmiller1708 10-21-2009 12:31 PM
Re: [ROM][Updated 10/15/09]NagROM[WM6.5.1 Build 23071][V0.11 & V3.11]
 
Quote:
Originally Posted by Firsttimer (Post 1251401)
This did not fix the problem. It still is stuck on the Align Screen screen at start up. My reg settings for the above key are...

[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
"CalibrationData"="2013,2070 3306,3060 3377,957 674,940 688,3067"
"MaxCalError"=dword:00000010
"DriverName"="touch.dll"

The CalData key is a Multi-String Value, did is use the correct type? Any other ideas?
Post your question here. Keep it to the point... i.e. What is the Reg edit to skip the Cal screen?

Good luck!

Nagrom Nniuq 10-22-2009 12:38 AM
Re: [ROM][Updated 10/15/09]NagROM[WM6.5.1 Build 23071][V0.11 & V3.11]
 
FYI, I am going to be going full time working on my TP2 ROM as soon as the unlocker is released (tomorrow is the rumor). So, I would say, do not expect anything from me until the end of November or Early December. I will try to keep up if there are any more releases during that time, but I need that time to get a handle on developing my ROM for the TP2. After that, I will get back to staying on top of the releases for the Touch also.

Firsttimer 10-23-2009 10:11 AM
Re: [ROM][Updated 10/15/09]NagROM[WM6.5.1 Build 23071][V0.11 & V3.11]
 
Is there a reg setting that will start Internet Sharing in the Connected mode when I launch Internet Sharing?

? my touch screen doesn't work so I need it to load and start at the same time.

Nagrom Nniuq 11-07-2009 04:02 AM
Re: [ROM][Updated 10/15/09]NagROM[WM6.5.1 Build 23071][V0.11 & V3.11]
 
Got a surprise for you all! I came back early and I bought build 23504 with me! It's going up now! I hope you all enjoy it. I look forward to your feedback and suggestions. I also added some more screenshots.

kasim 11-07-2009 12:40 PM
Re: [ROM][Updated 10/15/09]NagROM[WM6.5.1 Build 23071][V0.11 & V3.11]
 
Quote:
Originally Posted by Nagrom Nniuq (Post 1306491)
Got a surprise for you all! I came back early and I bought build 23504 with me! It's going up now! I hope you all enjoy it. I look forward to your feedback and suggestions. I also added some more screenshots.
Finally you back!!!

One question how did it go from 23081 to 23504?

mtxsho 11-07-2009 05:04 PM
Re: [ROM][Updated 10/15/09]NagROM[WM6.5.1 Build 23071][V0.11 & V3.11]
 
Quote:
Originally Posted by Nagrom Nniuq (Post 1247909)
Your weather problems should be fixed by uninstalling your fixes, then installing the city editor, putting in your city, update your weather, then install the CDMA fix. Then it should all work.
I've recently installed 3.12 and no matter what I try, the only option for weather that I have is Metter. In the Weather Fixes download, there are two files- the CDMA update fix and Manila Home Weather Updater with Mortscript. When I install the Manila updater, TouchFLO won't launch. Is the city editor missing from the Weather Fixes download? I've tried a few other TouchFLO weather database editors that I've found on here and none of them do anyhting. Any guidance anyone can offer would be a huge help. Otherwise the rest of the ROM seems to be running fine for me.

- Tim

kasim 11-07-2009 05:20 PM
Re: [ROM][Updated 10/15/09]NagROM[WM6.5.1 Build 23071][V0.11 & V3.11]
 
Quote:
Originally Posted by mtxsho (Post 1307504)
I've recently installed 3.12 and no matter what I try, the only option for weather that I have is Metter. In the Weather Fixes download, there are two files- the CDMA update fix and Manila Home Weather Updater with Mortscript. When I install the Manila updater, TouchFLO won't launch. Is the city editor missing from the Weather Fixes download? I've tried a few other TouchFLO weather database editors that I've found on here and none of them do anyhting. Any guidance anyone can offer would be a huge help. Otherwise the rest of the ROM seems to be running fine for me.

- Tim
Ok,
here's the steps that i do:
Select Metter location, what ever is available, then:
With any regeditor change to your city like this:
[HKEY_LOCAL_MACHINE\Software\HTC\Manila2D\Weather\0]
"Location"="Tampa, FL"
"LocationCode"="33607"

[HKEY_LOCAL_MACHINE\Software\HTC\Manila2D\Weather\S ettings]
"LocationCode"="33607"
"Location"="Tampa, FL"

Nagrom Nniuq 11-07-2009 05:37 PM
Re: [ROM][Updated 10/15/09]NagROM[WM6.5.1 Build 23071][V0.11 & V3.11]
 
Quote:
Originally Posted by kasim (Post 1306935)
Finally you back!!!

One question how did it go from 23081 to 23504?
Well, since I left 23075, 23081, 23502, 23504 have come out. The 230 series are the COM3 line and the 235 series are the COM4 line. COM4 is the main (official) line and the COM3 line is the line for new graphical tweaks. They periodically get combined and then we get 23504 :-) FYI, 23088 is out now. Dunno when I'll have a ROM with it up though.

Quote:
Originally Posted by mtxsho (Post 1307504)
I've recently installed 3.12 and no matter what I try, the only option for weather that I have is Metter. In the Weather Fixes download, there are two files- the CDMA update fix and Manila Home Weather Updater with Mortscript. When I install the Manila updater, TouchFLO won't launch. Is the city editor missing from the Weather Fixes download? I've tried a few other TouchFLO weather database editors that I've found on here and none of them do anyhting. Any guidance anyone can offer would be a huge help. Otherwise the rest of the ROM seems to be running fine for me.

- Tim
Your problem is covered completely on the first page. Please read and follow the directions and your problem will be solved. It is also possible you got your Weather Fixes from somewhere other than my thread or you got an old version. If so, please download the one from the first page. It has the CDMA fix and the City Editor.

mtxsho 11-07-2009 06:22 PM
Re: [ROM][Updated 10/15/09]NagROM[WM6.5.1 Build 23071][V0.11 & V3.11]
 
Quote:
Originally Posted by Nagrom Nniuq (Post 1307573)
Your problem is covered completely on the first page. Please read and follow the directions and your problem will be solved. It is also possible you got your Weather Fixes from somewhere other than my thread or you got an old version. If so, please download the one from the first page. It has the CDMA fix and the City Editor.
I downloaded the one from the first page in the thread. Its the same one that I had downloaded before and I still have the same problems. The most I can see about instructions on the first page is to install the fixes. Maybe I missed it? Oh well, thanks anyway.

- Tim

Nagrom Nniuq 11-07-2009 08:27 PM
Re: [ROM][Updated 10/15/09]NagROM[WM6.5.1 Build 23071][V0.11 & V3.11]
 
Quote:
Originally Posted by mtxsho (Post 1307676)
I downloaded the one from the first page in the thread. Its the same one that I had downloaded before and I still have the same problems. The most I can see about instructions on the first page is to install the fixes. Maybe I missed it? Oh well, thanks anyway.

- Tim
Try redownloading it. It definitely has the city editor in it. There are only 2 files. I just tested this to be sure.

kasim 11-08-2009 03:34 PM
Re: [ROM][Updated 11/6/09]NagROM for Vogue[WM6.5.1 Build 23504][V0.12 & V3.12]
 
Google Maps wasn't installed on v3.12, no biggie i've installed it.

Did any1 got to work missed calls on Home tab, i tried in M2DC to modify and nothing.

Am I missing something?

Nagrom Nniuq 11-08-2009 11:04 PM
Re: [ROM][Updated 11/6/09]NagROM for Vogue[WM6.5.1 Build 23504][V0.12 & V3.12]
 
Quote:
Originally Posted by kasim (Post 1309660)
Google Maps wasn't installed on v3.12, no biggie i've installed it.

Did any1 got to work missed calls on Home tab, i tried in M2DC to modify and nothing.

Am I missing something?
It's no longer a part of Manila. Same with TF3D.

speederd 11-09-2009 04:02 PM
Re: [ROM][Updated 11/6/09]NagROM for Vogue[WM6.5.1 Build 23504][V0.12 & V3.12]
 
Camera doesn't work. Get the following error...

The file 'Camera' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found...etc.

Nagrom Nniuq 11-10-2009 02:50 AM
Re: [ROM][Updated 11/6/09]NagROM for Vogue[WM6.5.1 Build 23504][V0.12 & V3.12]
 
Quote:
Originally Posted by speederd (Post 1312712)
Camera doesn't work. Get the following error...

The file 'Camera' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found...etc.
Yes... that is why it is listed in the bug list on the first page... You will have to install you own.

PedroDaGr8 11-10-2009 01:47 PM
Re: [ROM][Updated 11/6/09]NagROM for Vogue[WM6.5.1 Build 23504][V0.12 & V3.12]
 
Whoo hoo. Glad to see you are back. Currently waiting on my phone to get to the proper % charge so I can flash this new ROM.

atoz350 11-13-2009 03:11 AM
Re: [ROM][Updated 11/6/09]NagROM for Vogue[WM6.5.1 Build 23504][V0.12 & V3.12]
 
Quote:
Originally Posted by PedroDaGr8 (Post 1315826)
Whoo hoo. Glad to see you are back. Currently waiting on my phone to get to the proper % charge so I can flash this new ROM.
Put the phone into bootloader. (Power+ Camera button+ stylus reset) It will bypass the battery check.

PedroDaGr8 11-13-2009 05:56 PM
Re: [ROM][Updated 11/6/09]NagROM for Vogue[WM6.5.1 Build 23504][V0.12 & V3.12]
 
Quote:
Originally Posted by atoz350 (Post 1325034)
Put the phone into bootloader. (Power+ Camera button+ stylus reset) It will bypass the battery check.
Haha, thanks. I seem to remember I have had problems in the past with the trying to flash with the device already bootloader mode. Something about the RUU not being able to contact the device. Maybe an esoteric thing in Vista/Win7 or it could be PEBKAC (Problem exists between keyboard and chair).:)

atoz350 11-14-2009 11:19 AM
Re: [ROM][Updated 11/6/09]NagROM for Vogue[WM6.5.1 Build 23504][V0.12 & V3.12]
 
Quote:
Originally Posted by PedroDaGr8 (Post 1326776)
Haha, thanks. I seem to remember I have had problems in the past with the trying to flash with the device already bootloader mode. Something about the RUU not being able to contact the device. Maybe an esoteric thing in Vista/Win7 or it could be PEBKAC (Problem exists between keyboard and chair).:)

Yeah when I was running Vista, if I put the phone in bootloader first, I couldn't run the .exe file for the stock ROM. I could do custom ROMs just fine.

Now that I'm on Windows 7, everything just works.

jeeptrail08 11-20-2009 11:02 PM
Re: [ROM][Updated 11/6/09]NagROM for Vogue[WM6.5.1 Build 23504][V0.12 & V3.12]
 
Found a bug with this build running on the USCC Vogue.It will not allow EPST to run.If try to get in to EPST it will back you out of it regardless of running epst file in windows folder or ##000000#

Nagrom Nniuq 11-21-2009 03:02 AM
Re: [ROM][Updated 11/6/09]NagROM for Vogue[WM6.5.1 Build 23504][V0.12 & V3.12]
 
Quote:
Originally Posted by jeeptrail08 (Post 1348871)
Found a bug with this build running on the USCC Vogue.It will not allow EPST to run.If try to get in to EPST it will back you out of it regardless of running epst file in windows folder or ##000000#
Hopefully I will have build 28002 out to you all by sometime Monday night!

Batman 11-21-2009 11:38 AM
Re: [ROM][Updated 11/6/09]NagROM for Vogue[WM6.5.1 Build 23504][V0.12 & V3.12]
 
good luck :)

kasim 11-22-2009 02:06 PM
Re: [ROM][Updated 11/6/09]NagROM for Vogue[WM6.5.1 Build 23504][V0.12 & V3.12]
 
Quote:
Originally Posted by Nagrom Nniuq (Post 1349308)
Hopefully I will have build 28002 out to you all by sometime Monday night!
We'll be waiting !!!

Nagrom Nniuq 11-23-2009 10:28 PM
Re: [ROM][Updated 11/6/09]NagROM for Vogue[WM6.5.1 Build 23504][V0.12 & V3.12]
 
28002 is going up now. Enjoy!

PS. I want to say THANK YOU to those of you who recently donated even before this ROM came out. I'm serious when I say that just $1 make my day. It's really nice. Thanks guys!

Nagrom Nniuq 11-24-2009 03:19 AM
Re: [ROM][Updated 11/23/09]NagROM for Vogue[WM6.5.3 Build 28002][V0.13 & V3.13]
 
Dunno why, but the link for the 0.13 ROM went down. I just reuploaded the file, so it should be working again. Sorry.

Nagrom Nniuq 11-25-2009 02:22 AM
Re: [ROM][Updated 11/23/09]NagROM for Vogue[WM6.5.3 Build 28002][V0.13 & V3.13]
 
FYI, I hope to have 28004 up by Monday.


All times are GMT -4. The time now is 07:58 AM.
Page 7 of 11 « First 56 7 89 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® ©2000 - 2026, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0