OMJ's 3.03, 3.09, M2D WM6.1 Custom Touch ROMs w/ User Customization! Updated 10/9/08

[mvincent]

Originally Posted by mvincent

OMJ,

Excellent work as this is my first flash as well on my Verizon XV6900. ...I have one slight problem though as I cannot make any calls or access the internet.

Let me explain my steps. I had a recently deactivated Verizon XV6900. I followed the instructions and used the unlocker...then flased with Bell OEM for radio upgrade (I installed the Verizon carrier cab and still could not make calls)...Then I installed M2D v3 to see if that made a difference but it was the same. I again tried the Verizon carrier cab and even a newer one that i found but no luck.

After this was done I did an ESN swap with my current phone XV6900 on Verizon however I could not activate the phone via *228 etc. and when I try this it just tells me to call Verizon for help. Any help to point me in the right direction would be greatly appreciated

Thanks
MV

Update on the above... After comparing my non-modded XV6900 to the one I modified, I realized that all of the necessary settings in the ##778 EPST menu were erased (I assume when you load any custom rom this is the case?). So, I added back my custom settings from the EPST that were on the non-modded phone, however there were a few like the HDR & PPP passwords for internet access under "Security" that were Upper ASCII that could not be manually entered as I did not have all of these characters available.

My current state:
-Phone working incoming/outgoing
-*228 activation or updates will not work (but maybe this is correct after an update? Please confirm)
-Internet/Data will not work, I assume since I cannot enter/copy the HDR/PPP passwords, this is why.
-Phone comes up as BellMobility not Verizon Wireless on today screen and is not Digial roaming anymore

A few thoughts/questions:
1) Is there an easy way to export these EPST settings and import them from/to another phone (using QPST or Bitpim)? Where is this data kept? in the rom or OS files somewhere?
2) Also, does a phone have to be activated before you complete the rom upgrade...Was this another issue since I swapped ESNs and made the modded phone active after it had the rom installed?

Sorry for all the noob questions but I am at a loss and have been searching so many threads that I am cross-eyed now today. Thanks
MV

[OMJ]

Originally Posted by mvincent

OMJ,

Excellent work as this is my first flash as well on my Verizon XV6900. ...I have one slight problem though as I cannot make any calls or access the internet.

Let me explain my steps. I had a recently deactivated Verizon XV6900. I followed the instructions and used the unlocker...then flased with Bell OEM for radio upgrade (I installed the Verizon carrier cab and still could not make calls)...Then I installed M2D v3 to see if that made a difference but it was the same. I again tried the Verizon carrier cab and even a newer one that i found but no luck.

After this was done I did an ESN swap with my current phone XV6900 on Verizon however I could not activate the phone via *228 etc. and when I try this it just tells me to call Verizon for help. Any help to point me in the right direction would be greatly appreciated

Thanks
MV

the most common mistake is letting the carrier customization run when flashing an official rom that is not your carrier....in this case, flashing the official bell rom. you shouldnt have to enter anything in EPST. did u make sure you soft reset b4 carrier customization ran?

also, it is very common for Verizon users to have to call CS to get an A key (authorization) after upgrading the radio the 1st time.

You may be better off flashing the new leaked Verizon rom 1st b4 flashing my custom....in this case let the carrier customization run to get the Verizon settings.

ftp://ppcgeeks.com/Vogue/Verizon/RUU...37.77_Ship.exe

from this thread:

http://forum.ppcgeeks.com/showthread.php?t=43741

Originally Posted by JASTECH

I have a Sprint phone and used the Ditte ROM and VZ says the HEX# does not come up. So I would like to try your ROM if you have one ready for Verizon? I really need to get this phone working as I get calls from my Dr's due to my disability. Thanks, JASTECH

sorry, but I no longer have the touch so I wont be making a VZW rom......try the new leaked Verizon rom....link above.

[OMJ]

Originally Posted by crazaytalent

Also, I tried to install the lastest advance config tool on my sd card, but theres was a conflict w/ the one built into your rom, so whenever I tried to run it there was an error, i then tried to swap the latest version out w/ that was in the windows folder, hoping it would perfom the same, well that got rid of one error, but i got a whole new one instead... eventually I just had to hard reset to get the built in version back, so Im wondering is there a way for me to update the older built in version w/ the newer one, there are some tweaks and features on the newer one that the older version doesnt have and Id like to use... ultimatly, ill live w/o it if I have too, but just wanted to know if its possible...

Thanks again for all the hard work...

give this a try....these are the list of files that make up Adv Cfg, delete all these files, then try installing the cab again.

\windows

AdvancedConfig.resources.dll
AdvancedConfig.lnk
AdvancedConfig.exe
AdvancedConfig_040C.xml
AdvancedConfig_0409.xml

\windows\fr\AdvancedConfig.resources.dll

\windows\start menu\programs\utilities\AdvancedConfig.lnk

OR

attached are the files from v3.2, overwrite the original files in the directories above.

[ur_next15]

how come activesync is not working? it says i need version 4.5 or later but i have windows mobile device center?

help please.

[chborge]

Omj, i`ve tried to flash my htc 6900 cdma vogue, but the vogue unlocker mfg 2.31 couldnt unlock the phone, so i couldn flash the rom, what should i do, what is a stock rom?
I`m trying to flash the last rom from sprint, update to 6.31, upgrade the radio to rev A, MMS, GPS working, etc..., but it wasnt possible.
What do you think should be done in this case?.

[OMJ]

Originally Posted by ur_next15

how come activesync is not working? it says i need version 4.5 or later but i have windows mobile device center?

help please.

try going to settings/connections/uasb connection & toggle advance network functionality

Originally Posted by chborge

Omj, i`ve tried to flash my htc 6900 cdma vogue, but the vogue unlocker mfg 2.31 couldnt unlock the phone, so i couldn flash the rom, what should i do, what is a stock rom?
I`m trying to flash the last rom from sprint, update to 6.31, upgrade the radio to rev A, MMS, GPS working, etc..., but it wasnt possible.
What do you think should be done in this case?.

well, you gotta unlock if u want to flash a custom rom. a stock rom is the rom the phone came w/ or the carrier's rom.

i would post a question in the unlocker thread & state the problem you're having (in detail)

[ur_next15]

[quote=Old_Man_Jenkins;583477]try going to settings/connections/uasb connection & toggle advance network functionality

thank you for the quick support!

[The Weez]

Does anybody know if there is a fix (and maybe it's in a cooked ROM somewhere) for the problem with outgoing smtp mail where it just stops working, and the only solution is to delete the account from the phone and set it up again?

Or, a valid workaround?

[LB1704]

Love Your Rom But Was Just Wondering If You Have A Cab For Ignore Phone Calls With Text Message

[Tarin It Up]

omj what version of bt audio did u use in your roms? i just flashed a diff M2D ROM that didnt include bt audio. so i downloaded BT audio but its a trial version. do you have a newer OEM\CAB for this i can install?