PPCGeeks

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   HTC Vogue Development (http://forum.ppcgeeks.com/forumdisplay.php?f=59)
-   -   OMJ's WM6.1 Custom Touch ROM w/ UC, GPS, REV A! Updated 5/29/08 (http://forum.ppcgeeks.com/showthread.php?t=25335)

Zewnchops 05-15-2008 04:53 PM

Re: OMJ's WM6.1 Custom Touch ROM w/ UC, GPS, REV A!
 
Quote:

Originally Posted by Old_Man_Jenkins (Post 284281)
flashing the leaked rom does not require being unlocked, but flashing a custom does.....just imagine the leaked rom as a official release from your carrier, just run it, but skip the customization (yes, soft reset quickly, it gives u 3 sec). then unlock to flash a custom rom.

Thanks, flashing now then :)

Zewnchops 05-15-2008 05:34 PM

Re: OMJ's WM6.1 Custom Touch ROM w/ UC, GPS, REV A!
 
Dangit, I'm getting an error when trying to flash to the Sprint ROM (the one in the first post of this topic). It says:

Quote:

Error [294]: INVALID VENDOR ID

This update utility can not be used for your PDA Phone. Please check your Update Utility.
I am using a Vogue though, with the stock Bell ROM. It does show the RGB color screen when starting as well, then the loading bar shows up, but it just cuts out about 5 seconds after (still at 0%).

Any ideas? :(

Edit: On the RBG screen, it says VOGU100 / SPL-0.36.0000 / CPLD-3 if it helps.

turboaz 05-15-2008 05:34 PM

Re: OMJ's WM6.1 Custom Touch ROM w/ UC, GPS, REV A!
 
I have the htc logo stuck on the startup screen. How do I flash the leaked ROM to fix it if I cant sync from the stuck screen. Thank you!

rstoyguy 05-15-2008 05:36 PM

Re: OMJ's WM6.1 Custom Touch ROM w/ UC, GPS, REV A!
 
Quote:

Originally Posted by turboaz (Post 284348)
I have the htc logo stuck on the startup screen. How do I flash the leaked ROM to fix it if I cant sync from the stuck screen. Thank you!

Put the phone in bootloader mode: Press power, camera, then the reset on the bottom...then you may flash!

Zewnchops 05-15-2008 06:13 PM

Re: OMJ's WM6.1 Custom Touch ROM w/ UC, GPS, REV A!
 
Quote:

Originally Posted by Zewnchops (Post 284346)
Dangit, I'm getting an error when trying to flash to the Sprint ROM (the one in the first post of this topic). It says:

Quote:

Error [294]: INVALID VENDOR ID

This update utility can not be used for your PDA Phone. Please check your Update Utility.
I am using a Vogue though, with the stock Bell ROM. It does show the RGB color screen when starting as well, then the loading bar shows up, but it just cuts out about 5 seconds after (still at 0%).

Any ideas? :(

Edit: On the RBG screen, it says VOGU100 / SPL-0.36.0000 / CPLD-3 if it helps.

*bump* Any help with this please? :( Should I try unlocking first even for the Sprint ROM?

I know I'm being impatient, but I'm too excited :mrgreen: lol

earthdan 05-15-2008 06:18 PM

Re: OMJ's WM6.1 Custom Touch ROM w/ UC, GPS, REV A!
 
I'd try unlocking first, but yah usually you don't need to unlock if you are flashing a stock rom.

earthdan 05-15-2008 06:21 PM

Re: OMJ's WM6.1 Custom Touch ROM w/ UC, GPS, REV A!
 
Ugh sorry to post this but I'm still having gps issues. With the 3.37.15 radio and either the sprint leaked rom or OMJs stock sprint, or omjs custom, I can "see" up to 12 sats but no locks at all even after being outside for a while. Any ideas?

Would there be any point to try those kickstart files again?
cheers

Zewnchops 05-15-2008 06:45 PM

Re: OMJ's WM6.1 Custom Touch ROM w/ UC, GPS, REV A!
 
Quote:

Originally Posted by earthdan (Post 284382)
I'd try unlocking first, but yah usually you don't need to unlock if you are flashing a stock rom.

Ah, success, it works! Flashing at 8% as we speak! Must be something with the Bell ROM.

Thanks again :)

Edit: Flashing to OMJ's release now. All is well so far *knock on wood*

earthdan 05-15-2008 07:19 PM

Re: OMJ's WM6.1 Custom Touch ROM w/ UC, GPS, REV A!
 
hey zewn good to hear, let me know how your gps is when you get the chance
cheers

Zewnchops 05-15-2008 07:28 PM

Re: OMJ's WM6.1 Custom Touch ROM w/ UC, GPS, REV A!
 
Quote:

Originally Posted by earthdan (Post 284443)
hey zewn good to hear, let me know how your gps is when you get the chance
cheers

Got it installed and running well! :) Thanks for all the help bud.

About the GPS, since I've never used this before, how would I check for satellites and such?

I just loaded Google Maps on and checked "Use GPS" but it keeps saying "Seeking GPS Satellites (0)...". Is there some other options I need to change before hand?


All times are GMT -4. The time now is 10:47 AM.

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0