Please help to un-brick my bell Touch PRO

[puffhoney]

Hi All,

My Touch Pro (Bell Mobility) now is always in reboot loop, it only shows white "Touch PRO" in the 1st screen. After around 30 - 40 seconds, reboot again. Neven been rebooted sucessfully.

Here are what I did:
1. originally it should be SPL-0.35 or -0.25 somthing like that, after use Raphael_CDMA_HSPL_037 unlock , well done, it shows 0.37-comex (thanks this forum and authors)
2. use PC to flash a chinese version ROM, says sucessfully 100% done.
BUT after that it was going to reboot loop (what i guess is it's a GSM version only?)
3. I want to make it back to original, so I use that Raphael_CDMA_Relocker (BEFORE I REALIZED should flash BELL Stock rom first).
4. in tri-cololr screen, now it says RAPH800 SPL-0.37-0000 (relocked already?)
5. I could not flash anything in anymore, ActiveSync conection could not been connnected, and RUU always said 262 error and when reboot 100% goes to reboot loop, have to take out of the battery to close it.

Anyone have suggestion how should I do? I am still in the 1st month warranty, but afraid Bell will not accept it.
I tried hardset, use Raphael_CDMA_HSPL_037 to lock it again (failed due 262 problem, stucked on 0% screen), or put different RAPHIMG.nbh (tried one by one) to SD card (always only "loading", and after long time i have to reboot it and still the same infinite loop).

Thanks for you patience, please ignore my bad english.

[stevedusa]

I have a feeling that you flashed a GSM ROM into a CDMA device... well in that case, what I suggest you to do is to unlock it (via SD card now, seems like your only option) then make sure you flash a CDMA ROM via the SD card.

[puffhoney]

thanks for your quick reply.
But i tried many times with SD card unlock, all failed.
1. i could not copy anything into main memory since phone could not boot normally.
2. with one RAPHIMG.nbh (http://ppcgeeks.com/forum.ppcgeeks/a...5&d=1242340117) in SD card root folder and in tri-color screen, it shows always loading. nonthing else. and reboot still in infinite reboot loop. Or there is any other unlocker software here?

[puffhoney]

the unlocker image i used is on this thread SD card http://forum.ppcgeeks.com/showthread.php?t=43266

[puffhoney]

sorry i put wrong thread link in last post, should be http://forum.ppcgeeks.com/showthread.php?t=61333, title "unlock your TP via the SD card"

Originally Posted by puffhoney

the unlocker image i used is on this thread SD card http://forum.ppcgeeks.com/showthread.php?t=43266

[ahawke01]

I would first attempt to put the stock rom back on the phone and once that is a success then you can start attempting to unlock it again. I had a similar problem while working on my buddies PRO. He wanted me to unlock it and add a ROM I made on his phone for him cause it was fast and I did so and while installing it the phone started going into a loop and I fixed it by flashing the stock rom back on the phone and then re-unlocking it and re-flashing the ROM. You did not brick the phone if it will boot. You just need to find something that will flash and hold long enough to flash it to what you wanted in the first place.

I hope this helps and good luck.

[puffhoney]

thanks ahawke01.

for me, the bad thing is that i can not put any file (i searched and every unlock need to put one exe file in phone's main memory).
And can not use ActiveSync either, it always device not recongnizedable, no connection.

And for flash back Stock rom, I tried with Bell Stock Rom but it as all others, after tri-color, it only shows "loading" till battery empty, nothing changed

what's the normal display if flash could be flashed back?

[jhr]

Make sure your microSD is Formatted to fat32 using a PC (you dont have to delete all files but it is safer if you do)

that is a quote i got from xda-developers. com

http://forum.xda-developers.com/show...shing+micro+sd

even though it has some instructions for gsm all the other principles are the same.

hope this helps. update us please

[razorloves]

hey puff...
i sent you a private message

[puffhoney]

I did format it to a FAT32, a 1gb card.
It only keeps say "loading"...