[BUILD] **Complete GingerBread Bundle!!** GBX0A - Alpha! Camera! - Page 5

**arrrghhh** · #41 (**permalink**) 05-12-2011, 08:38 PM

Quote:

Originally Posted by Reign01

I know and I appreciate your help these past few days. But I have mentioned on the previous page that:

It is Andorid Version 2.2.2
Kernel Version- 2.6.27.46-01318-g4ff4420
Build- FRX06
I will try the build that you have posted, in case it has a different kernel that the one that I am currently using.

You mentioned it, but did you try wifi on that build? Can you give me logs from trying to use wifi on that build? Can you give me dmesg and logcat? Also, can you attach the logs to the post or put them in code braces...?

I'm tryin to help you here, but you need to help me - be verbose, and troubleshoot thoroughly. If you can't, then perhaps Android isn't ready for you on this device

.

Reign01 · #42 (**permalink**) 05-13-2011, 06:19 PM

I tried it on 06 and it didn't work. It justs scans and leads to an error. I'm going to just wait a few months and build and kernel updates before I seek xdandroid on my raph800.

**arrrghhh** · #43 (**permalink**) 05-14-2011, 03:04 AM

Quote:

Originally Posted by Reign01

I tried it on 06 and it didn't work. It justs scans and leads to an error. I'm going to just wait a few months and build and kernel updates before I seek xdandroid on my raph800.

Ok, if you do want some help get me some logs from testing with 06.

SomeUsername · #44 (**permalink**) 05-23-2011, 02:17 PM

I have a RAPH 500. When I boot it, it skips the calibration screen and goes straight to the XDAndroid logo and then turns off. It doesn't turn on unless I do a hard reset. I've been looking for an answer to this in the other threads. It could be the kernel? I'm sorry, I am not experienced in this, but I'm doing my best to learn.

**arrrghhh** · #45 (**permalink**) 05-23-2011, 03:54 PM

Quote:

Originally Posted by SomeUsername

I have a RAPH 500. When I boot it, it skips the calibration screen and goes straight to the XDAndroid logo and then turns off. It doesn't turn on unless I do a hard reset. I've been looking for an answer to this in the other threads. It could be the kernel? I'm sorry, I am not experienced in this, but I'm doing my best to learn.

Did you grab the calib file in the first post...?

If not, you need to follow the directions to manually calibrate. Please re-read the first post.

SomeUsername · #46 (**permalink**) 05-23-2011, 04:08 PM

I grabbed the calibration file when I first booted it and I have the latest kernel: 20110522_213148. I was also considering changing the rootfs.

It still skips the screen but now goes straight to the android home menu for a few seconds and turns off.

**arrrghhh** · #47 (**permalink**) 05-23-2011, 04:17 PM

Quote:

Originally Posted by SomeUsername

I grabbed the calibration file when I first booted it and I have the latest kernel: 20110522_213148. I was also considering changing the rootfs.

It still skips the screen but now goes straight to the android home menu for a few seconds and turns off.

Did you try the Froyo bundle? How about the kernel that's included, 1276? I know that the RAPH500 isn't supported very well, because it's so crippled (has less RAM than every other RAPH..)

SomeUsername · #48 (**permalink**) 05-23-2011, 04:47 PM

I used the 1276 and it was even worse. With the 1321, I at least got the home screen to come up after toying with it. I knew RAPH500 was going to be a challenge when I bought it for cheap, heh.
Just tried Froyo, booted and still skipped the calibration screen and went straight to the xdandroid animation and hasn't changed.

EDIT: went back to the 1321, same problem of skipping the calibration screen, but it's not glitching out as much when the home screen shows. Besides the calibration, it is working.

**arrrghhh** · #49 (**permalink**) 05-23-2011, 05:10 PM

Quote:

Originally Posted by SomeUsername

I used the 1276 and it was even worse. With the 10522, I at least got the home screen to come up after toying with it. I knew RAPH500 was going to be a challenge when I bought it for cheap, heh.
Just tried Froyo, booted and still skipped the calibration screen and went straight to the xdandroid animation and hasn't changed.

EDIT: went back to the 10522, same problem of skipping the calibration screen, but it's not glitching out as much when the home screen shows. Besides the calibration, it is working.

I guess I'm not really following you. You only need to calibrate once - assuming you have a good calibration file save it - you should never need to create another one... So if you have a good ts-calibration file that's valid and placed where you launch haret from, you'll never see the calib screen...

As I stated in the first post, go back to an older kernel if you wish to calibrate manually...

SomeUsername · #50 (**permalink**) 05-23-2011, 05:29 PM

Sorry if I'm getting a little off-track. I'm trying to give as much info as I can.

As stated in the first post, during the initial boot process, I should see the calibration screen and follow the calibration instructions. I watched the process, but I never saw the screen in the initial boot. I continued not to see a calibration screen at any time that I have booted android.

I used 2 ts-calibration files so far, downloaded and unzipped the one in the first post of this thread and the one in the first post of the froyo bundle.

I do not know how to generate/create a ts-calibration file from the kernels I found.