Re: [UPDATED] Sprint TV 100% working
 

Sorry to be a pest but can you be more specific in the steps you taken to get it to work?

I am on Energy LEO 21864 and want to try Juicy R3 but I do not want to re-invent the wheel.

Everything works for me on Energy Leo except when I pull up Sprint TV I cannot get past the first screen where it says, Sprint TV, Sprint Radio, Premium Channels...

To get past that point I need to use the keyboard and press the ENTER KEY.

Thank you,
Rob.

Re: [UPDATED] Sprint TV 100% working
 

Has anyone gotten this to work on energyrom? I don't want to hard reset before knowing whether it it works on energyrom. I just want the caller id state thing fixed and access to sprint tv. (the standard energyrom mms fixes are already adequate)

Re: [UPDATED] Sprint TV 100% working
 

I is working for me under Energy ROM LEO. I don't know if it will work under Photon.

Re: [UPDATED] Sprint TV 100% working
 

thank you for making the sprint tv work so beautifully! I am on MM current ROM and I am still receiving the bootstrap error after installing the update prl / profile cab. and when it tries to update it just hangs in limbo. I rebooted after each install, and have not installed anything crazy...Should I just hard reset and be happy with my tv?

Re: [UPDATED] Sprint TV 100% working
 

What build are you using? 23xxx or 21xxx? I am using 21864 I guess I can always wait until a newer energyrom is released and muck around with this fix after I flash.

Re: [UPDATED] Sprint TV 100% working
 

I don't necessarily think you need the PRL updater. I was having the same issue as you are so I just excluded it from installation. No problems yet. The only drawback I see from not having it is when updating your PRL OTA. There's always away around doing it manually so I'm not worried about it.

Re: [UPDATED] Sprint TV 100% working
 

This is the post I was looking for. THANKS!:mrgreen:

Re: [UPDATED] Sprint TV 100% working
 

Just flashed to the newest MightyRom ran the provisioning cab within the ROM, rebooted. Installed Sprint TV from the 1st post and soft reset. Ran the program and it worked no errors 1st time.

However, the quality was pretty poor on the minute or so of video I watched on NFL network. I don't recall the OEM player looking so horrible.

Re: [UPDATED] Sprint TV 100% working
 

Wow... THANK YOU Mr. X!
This is awesome. I just flashed the new EnergyRom (21869), then installed the provisioning cab, soft reset. Then installed the PRL/Profile cab, soft reset. Then installed the SprintTV cab, soft reset... now sprinttv works like a charm, the quality is great watching the nfl network. I tried installing the mms fix I keep getting an error saying I don't have sufficient privileges to install the program. No biggie though, because using the mms fix specifically for energyrom works already.

Re: [UPDATED] Sprint TV 100% working
 

have you tried the prl updater? feedback?

Re: [UPDATED] Sprint TV 100% working
 

Thanks again, the PRL and Profile update both seem to work. I run them and it says they work. Honestly I am not sure what they do to begin with but it looks and acts like the PRL and Profile updates from the stock rom, so I am assuming they work.

I haven't received any calls yet so I can't comment on whether the state ID thing is fixed, I'll post after someone calls me. (It definitely wasn't working before I installed your provisioning cab)

Any idea why the MMS update won't install? It say something about having insufficient privileges to do so.
EDIT: maybe I'm a retard, I need to disable manila first right? I'll give that a shot in a bit and post the results.

Re: [UPDATED] Sprint TV 100% working
 

it wont install because your rom probably already included Arcsoft MMS and it wont allow you to over write it because of system policies.


Call ur cell from your house. iev had it tested it works now :) had a fellow staff member test.

Re: [UPDATED] Sprint TV 100% working
 

Jugg, any idea why the playback is sometimes very choppy watching nfl? Even with a good signal it's still sporadic, like it's not buffering, etc, very pixelated at times. I'm on MM ROM. Are there changes that can be made for that on our end?

Re: [UPDATED] Sprint TV 100% working
 

Ah, that makes sense, the version of EnergyRom I have I think already does come installed with Arcsoft MMs, since Sprint MMS was already working "out-of-the-box" with the release I was using.

I'd totally call myself if I had a land line, haha. I think I'm just going to call a friend at lunch and have them call me back, haha.
Update: So the sprint provisioning cab definitely fixes the broken state id thing for me. Awesome, thanks again.

Re: [UPDATED] Sprint TV 100% working
 

This might be a stupid question and excuse my ignorance if it is but will this work on a T-Mobile US TP2? The reason I ask is because I also own a T-Mobile G1 (USA) and the devs in xda were able to port a bunch of Sprint apps over to the G1 and MyTouch/Magic. One of the apps being SprintTV. I have all the Sprint apps (Sprint NFL, Sprint Nascar, Sprint Navigation) working on my G1. The only one that isn't working anymore is SprintTV because Sprint was apparently able to patch whatever it was that made it possible for the devs to port it over to T-Mobile phones.

So, if anyone can tell me if this will work on my T-Mobile US TP2 I would greatly appreciate it. Thanks.

Re: [UPDATED] Sprint TV 100% working
 

I am pretty sure you need a Sprint signal for SprintTV to work. It wouldn't work for me on wifi, it gave me a warning saying I needed to be on the Sprint network. Anyway, the G1 is android and all these are winmo cabs.

Re: [UPDATED] Sprint TV 100% working
 

Yea I am aware that the G1 is android and these are winmo cabs but I have both..a G1 and a T-Mo TP2. I was just wondering if the SprintTV cab would work on my T-Mo TP2 being that we were able to get Sprint apps to work on our T-Mobile G1's.

Re: [UPDATED] Sprint TV 100% working
 

Ah, okay. SprintTV definitely needs the Sprint network. That's the reason us Sprint users had to wait for something like Mr. X's Sprint Provisioning cab to get SprintTV working.

Re: [UPDATED] Sprint TV 100% working
 

i have this same exact problem. i was using a single gmail account and after installing this when i clicked on the 3d envelope it did nothing.... i re-added the account just as he did and now have 2 gmail folders! i can only access one however. can someone please help? where do i need to edit the registry? thanks in advance

Re: [UPDATED] Sprint TV 100% working
 

Guys i have this same issue, now sure where it cropped up but its not the cabs, they set nothing at all related to email, the email inbox or any settings.

its something in the rom. mine included. thats causing the xmls not to set correctly

Re: [UPDATED] Sprint TV 100% working
 

I've seen this happen too.. Running latest mighty.. provisioning email thru xml(SDConfig)..

If I let the phone sit for a while after hard resetting without going to the email tab it seems to work fine.. (I know it worked when I get the new mail notifications)

Out of every 5 hard resets about 2 have this issue..


Edit:

After some further testing I must say that I do think something is wrong with the cab.. I'm not triying to blame anyone but to report in order to find a solutions.. Here's what I've done.

I'm provisioning my exchange/pop/imap accounts thru xml (SDConfig) this worked without a hitch no previous MightyRom versions (I've flashed them all). Only on the latest version I'm getting the email problem. Another thing I noticed is that if I let the SDConfig run the cab for your provisioning when the device boots and I try to sync over the air with activesync it will prompt me for my password (it shouldn't, the password is on the xml)

To confirm I removed the cab from the SDconfig file, hard reset again. This time the phone came on and I didn't ran the Mighty provisioning either.. ActiveSync works the first time I hit Sync without asking for my passord; the way it did on previous Mighty Rom versions.

To further troubleshoot I performed the same steps as above, but before syncing I used the Mighty Rom provisioning tool and lo and behold, when I hit sync it asks for my exchange password.

I tried using the Mighty provisioning cab, your cab (which I believe are the same) with the same results.

I even hard resetted one more time without provisioning, did a sucesful sync (no password prompted, no issues). After that I used the Mighty provisioning tool and instantly I got the password prompt for my exchange account (since it's push).


Sincerely I don't see anything that might be affecting this, but I do think is something on that cab.

Isn't there a way to compare it with the previous one on Mighty's ROM to see what so different??

Re: [UPDATED] Sprint TV 100% working
 

thanks for your testing, but i let my mail setup via xml, dont run any cab and i still have the issue lol so thats why i think its my rom not the cabs. let me do some testing. what could be the issue is when the xml runs it set up the account for the generic connection. then once the app installs it switches the connection out from under the mail client causing it to crap its pants. im testing a few things here to see if this is correct.

Re: [UPDATED] Sprint TV 100% working
 

k, I'll be watching this thread..

BTW, I'm using Mighty's rom so it's not your rom only.

Just for the sake of it I've hard resetted my device 5 more times and exchange/pop/imap provisioning works as long as I don't use the sprint provisioning cab.

on the last one, ran the mighty provisioning tool and the first thing i get when the device restarts is the exchange password pompt. (pop and imap work fine after this since they where already provisioned by SDConfig)

tried it two more times installing the provisioning cab via SDConfig and I got the empty containers for the imap/pop and the prompt for exchange password.

What I'm doing is provisioning everything via SDConfig, make sure the POP/IMAP accounts are created correctly and Active Sync syncs correctly.. THEN I run the provisioning tool (I still need to reenter my Excange password but everything works after).

Re: [UPDATED] Sprint TV 100% working
 

ok
I am correct. installing the provisioning XML before the cab causes the mail app to drop the account, using fdcsoft task manager i re ran my xml and it fixes the mail account.

What ill test is running the Provisioning cab before the xml in sdconfig next and see if this helps. but the work around for this mught be to use FDCsoft task manager to run the xml after sdconfig which isnt too bad.

Re: [UPDATED] Sprint TV 100% working
 

Thought of that too..

The first thing my SDConfig always ran first was the provisioning..
Altough I did noticed that this provisioning cab ask for a restart.. I don't know if the other one did too.

Can you confirm if the previous provisioning cab asked for a restart too??

If I leave the provisioning cab alone on my SDConfig followed by my Exchange XML I get the password prompt for exchange, if I take the cab out and leave only the Exchange XML it will sync no problems, no pass asked.

Re: [UPDATED] Sprint TV 100% working
 

I have this same prob.. Anyone find a fix for it yet ? I drive around the US and roam more often then i wish, so up to date PRL would be very nice.

Re: [UPDATED] Sprint TV 100% working
 

Strange, absolutely no problems with the PRL/Profile updater on EnergyRom

Re: [UPDATED] Sprint TV 100% working
 

+1 , Running Mightys latest ROM. Used the provisioning link in this thread. Get the error after every soft reset. Can't remove it via "Remove Programs" and I looked in the start menu looking for a way to prevent the startup attempt. Is there a registry entry to prevent this attempted start or am I destined for another hard reset and reload ?

Both Update PRL and Update Profile hang, nothing gets accomplished after running both for 5+ minutes. I did try it off the USB connection and that made no difference.

Thanks

Re: [UPDATED] Sprint TV 100% working
 

Has anybody got the sprint prl and sprint profile working I can't it acts like its going to go through and then it freezes. any suggestions I'm using mighty rom 11/16 I've tried with mightys provision and I've tried with mxsprint provision and I tried both nothing working

Re: [UPDATED] Sprint TV 100% working
 

I think the prl and profile update missing is what is causing me to not be able to download anything off of sprints website that I purchase running mightrom 11/16. Anybody else having the same issue

Re: [UPDATED] Sprint TV 100% working
 

As I have posted before the PRL and Profile update seem to be working just fine for me on EnergyRom winmo builds 21864 and 21869. Not sure if it's relevant but:
(1) I installed Mr. X's provisioning cab after a fresh flash, soft reset;
(2) installed Mr. X's PRL/Profile update cab, soft reset; and
(3) then I installed SprintTV, soft resent
then I was in business.
The caller ID no city, state issue was fixed, SprintTV worked, PRL/Profile updates worked.

I dunno if that helps anyone.

Re: [UPDATED] Sprint TV 100% working
 

I've been trying to get SprintTV working on my old Touch Pro but it looks like all the Sprint TV experts have moved onto the TP2... so I'm asking the question here (sorry).
Can I do steps 1+2 on my Touch Pro to get Sprint TV working on my Touch Pro? (I know the SprintTV cab is different for the TP2)

Re: [UPDATED] Sprint TV 100% working
 

Nah.. PRL is just a way to update your 'Preferred Roaming Lists' so when you are roaming you have any new towers added by Sprints roaming partners and the Update profile won't effect it either, you wouldn't have any connectivity to data if there was something wrong with your data profile.

Re: [UPDATED] Sprint TV 100% working
 

Juggalo_X.. found the problem.

The file "modelname.txt" was breaking the email setup done by SDConfig.

Tried on at least 3 phones and definetly that was the cause.

I'm including your post without that file if anyone is facing the same issue.

Re: [UPDATED] Sprint TV 100% working
 

The Modle ID.txt is needed for the sprint soft to verify what device its being ran on AFAK. did it break anything removing this?

Re: [UPDATED] Sprint TV 100% working
 

Just had a user test, with out the sprint modlename.txt sprint tv no worky. sooo, i have a plan for a solution in my rom atleast that will solve both these issues.

Re: [UPDATED] Sprint TV 100% working
 

Ok to resolve this, i will be cooking the Sprint Modlename into my rom as sprint is the old device that software depends on this to authenticate.

I wont be removing it from my cab so that cooks who dont include this my cabs will still work to get sprint soft working.

For users who use my rom, cooking in the sprint model id means that installing this provisioning cab or any others of mine will not affect your mail setup any more. if this is infact the cause.

Wirelessly posted (HTC TP2: Opera/9.5(Microsoft Windows; PPC; Opera Mobi/16643; U; en) HTC_Touch_Pro2)

I told Mike about my fi.dings and suggested to him to include your modelname on his rom.

Dint know if he got to read it, must be buried on his rom's thread.

Wirelessly posted (HTC TP2: Opera/9.5(Microsoft Windows; PPC; Opera Mobi/16643; U; en) HTC_Touch_Pro2)

Didn't broke anything on my setup.. Altouhg I don't use/need Sprint TV so didn't test that.

I assume leaving the modelname unchanged can break SprintTV and probably PRL updates and other Sprint apps

Re: [UPDATED] Sprint TV 100% working
 

Just flashed to EnergyRom build 28005. Used Mr. X's provisioning cab:
-PRL/Profile updated fine
-SprintTV works

Couldn't ask for much more!

Thanks again!

UPDATE: works on EnergyRom build 21877 too!