Re: [UPDATED] Sprint TV 100% working
 

Further more on what juggalo just said, I have had this happen to me just cuz of stupidity and a hard reset was my unfortunate answer :(

Re: [UPDATED] Sprint TV 100% working
 

This is weird then. Installed the provisiong cab, reset when prompted. And now it won't accept my password. So now I am locked out of my phone. Can't even hard reset. Only option left is flash again I suppose. Sigh.

Re: [UPDATED] Sprint TV 100% working
 

You can hard reset., take out battery .. .put back in and dont turn the phone on. . press and hold talk and end key.. then hold top power.. follow promts to reset. .. Btw .. just tried to unlock with provison cab with pin code and it worked fine

Re: [UPDATED] Sprint TV 100% working
 

again i just had a few users test this..... all is well... i has to be something u installed or your rom :(

Re: [UPDATED] Sprint TV 100% working
 

Restored it. Thanks. I am going to restore from backup b4 provision install and disable pin lock first and try again.

Re: [UPDATED] Sprint TV 100% working
 

wow, this really works. thanks!!!

Re: [UPDATED] Sprint TV 100% working
 

Tried in in NRG 6.5.1 (latest os) Nov 9 and it fails. I installed the mrx first then reboot. Installed arcsoft client then reboot. nada...

oh wait.. it wasn't working in manilla 2.5 but it worked in the messaging client! woot!

Re: [UPDATED] Sprint TV 100% working
 

Very good

Re: [UPDATED] Sprint TV 100% working
 

Tried the updated ones. SprintTv still works fine. Prl/Profile still give the Factorybootstrap, can't get device id error. I am using MM Rom.

Re: [UPDATED] Sprint TV 100% working
 

On the new Merdin 2.5 rom, I can not get sprint tv to work. I installed the provisioning cab, then rebooted. I then installed the sprint tv cab, and rebooted. When I go to launch sprint tv i get the following error:

There was a problem connecting to the network. Please make sure the phone is turned on and restart the application (error 1).

Re: [UPDATED] Sprint TV 100% working
 

hi, awesome job getting Sprint TV running. thanks again. I have one issue that I have not seen posted so I am unsure what may have caused it. Beforer running the prov cab and the prl cab I had 2 email accounts. One was an outlook exchange account , the other a pop 3 ISP account
(roadrunner) after installation and sprint tv working, I was getting the bootsrap device id error (running MM rom) i did a hard reset and restore, then reinstalled without the prl cab.
now on the today screen where the messaging icons are, i show my mail as normal. ican even slide thru the "3d" messages displayed but when I try to open one of the roadrunner emails from the 3d letter view , or go to the inbox for the roadrunner account, it does nothing, and no longer shows up on my mail accounts where you normally go to setup, etc. I went ahead and readded the same mail accout under a different name and it works fine now, but the problem is I still have an extra envelope icon on the messaging screen and it shows the number of messages in my inbox although I cannot access it. Where can I go within registry to delete that account specifically as i cannot do it under mail accounts? I already have rebuilt the account with different name so I really only somehow need to delete the old one so it does not show up on the messaging screen anymore, Can someone help? I dont know if anyone else had this issue, but hopefully someone can give me a directory location or edit that I can use to delete the old account. Thanks

Re: [UPDATED] Sprint TV 100% working
 

yah brah!!!...sprrint tv is wrkng on nrg leo rom 10/25 build!..now to try mms..

Re: [UPDATED] Sprint TV 100% working
 

make sure you are not connected via usb or wifi and are using your actual cellular connection.

Re: [UPDATED] Sprint TV 100% working
 

Sorry Jugg for not being more specific. The problems I was having w/ MMS was being able to send both pics and videos and receiving pics but not being able to receive videos from VZW. I could receive them from sprint phones but they were small. Happened on all Arcsoft cabs I tried, and running MM111009. It worked w/ the original MM version though. I also could not get the PRL or profile to update, they just sat there, no errors, no nothing, didn't lock the phone up, just didn't work. I haven't tried them again since other people are noting they're on MM and they didn't work for them or their getting the bootstrap errors. I did manage to get MMS working using JD's arcsoft cab and sprint TV is working great (Thanks much sir!!!), but the prl and profile didn't do anything.

Re: [UPDATED] Sprint TV 100% working
 

thanks will work on the MMS, can nay one les verify these errors?

Re: [UPDATED] Sprint TV 100% working
 

I was on my cellular connection. That is what is strange with this error.

Re: [UPDATED] Sprint TV 100% working
 

Cannot get past SprintTV Start Menu.

I Get the menu that has:

SprintTV

Sprint Radio

Premium Channels

I can use the stylus or my finger to highlight the above items but if I double tap they do not start.

The only way I found past this is press enter on the keyboard.

Is there a solution for this?

Thank you,
Rob

Re: [UPDATED] Sprint TV 100% working
 

what rom? sprint tv depends on some of the sprint packages that i cook into my rom
urs may not have it.

Re: [UPDATED] Sprint TV 100% working
 

MightyROM Sprint Tv 100%

Re: [UPDATED] Sprint TV 100% working
 

I am running Energy LEO 21864, Nov 9.

Once I get past the first screen which Sprint call the Shortcut screen it all starts to work. I even uninstalled the Enhanced 3D but still the same problem.

This is really strange.

Thank you,
Rob.

Re: [UPDATED] Sprint TV 100% working
 

i have hard reset numerous times and I still get the same error. Someone please hhheeelllppp!!!
I need my sprint tv.](*,)](*,)](*,)

Re: [UPDATED] Sprint TV 100% working
 

Interesting. I guess maybe my MMS isn't working correctly either then? I sent myself a video and it's small when I play it. Thought that was normal. I'll try to have my friend from verizon send me a video.

Re: [UPDATED] Sprint TV 100% working
 

it is normal for it ot be small as our screen is much larger then other devices

Re: [UPDATED] Sprint TV 100% working
 

ahh..ok. Thanks. I'll leave it alone then.

Re: [UPDATED] Sprint TV 100% working
 

there are 2 issues with the MMS Vid that ill adress here,

1) w have 800x480 pixels. most other devices only have 320x240 at the most... for the average sprint phone. hence when we get a Vid MMS that is in a lower resolutions it appears smaller as it is only using for example 177x100 pixels so if you send it to an older device they can view it

2) changing the file size limit to over 2mb is useless the app will not open it and will error on "this file is too large to be viewed on this device) this again is a limitation set by the app so that when u send a MMS of that chicks boobs jiggling while she joggs past ur front porch each morning..... that the odler device you send it to can store it.

Re: [UPDATED] Sprint TV 100% working
 

Sprint TV is not working on Energy roms latest 6.5.1 os 11/9. It sits at the launch screen where you can pick sprint tv/sprint radio/premium tv. will not get past this screen.

Re: [UPDATED] Sprint TV 100% working
 

sprint tv working great to cfay's rom , only installed the mrx sprint cab and sprint tv cab , and bam it works great, and i didnt have to hard reset thanx juggs

Re: [UPDATED] Sprint TV 100% working
 

That is the same thing happening with mine. If you go back a few messages you will see. You can get past that point by hitting enter on the keyboard..

Re: [UPDATED] Sprint TV 100% working
 

yo guys, i boned up that last sprint prov cab by mistake, get the new one or you will miss calls :S sorry!

same link in first post.

Re: [UPDATED] Sprint TV 100% working
 

For the updated sprint prov cab, it says the old one can't be installed. Do we simply install new one over it or do we need to restore or hard reset to install the new revision?

Re: [UPDATED] Sprint TV 100% working
 

Yea just overwrite the old one.. if by chance it will not .. a hard reset my be in your future.

Re: [UPDATED] Sprint TV 100% working
 

Just as its says in his statement. . Call issue's

Re: [UPDATED] Sprint TV 100% working
 

What has changed between the 2 cabs? Is there a value that can be changed in the registry? I just spend hours rebuilding my phone after the last hard reset that was required by the cab.

Thank you,
Rob.

Re: [UPDATED] Sprint TV 100% working
 

i have not been having a missed call issue and it will not let me install new mrx cab over old 1...not tryning to redo the whole phone..any1 not able to install

Re: [UPDATED] Sprint TV 100% working
 

the old cab would set blank values for a bunch of notifications, and your phone would not ring. ive updated the cab so it does not cause this issue on a few roms.

Re: [UPDATED] Sprint TV 100% working
 

thanks jagglo.. sprint tv work fine with the latest mightRom...

Re: [UPDATED] Sprint TV 100% working
 

Im using juicy R3 rom, and i did not install the provisioning cab as you directed. I installed your cab and then soft reset. Installed sprint tv cab, then soft rest. Then i try to run sprint tv and i get this error:

unable to launch the app using current internet connection. To run the app, please change your internet connection to use the cellular network.

??

Re: [UPDATED] Sprint TV 100% working
 

When i install the mrx sprint prl updater, nothing happens. At all, literally nothing happens on juicy's R3

Re: [UPDATED] Sprint TV 100% working
 

kash23 did you install my MRX_Sprint.cab as instructed? it should work fine.


also users who are having issues running sprint tv on energy rom thats something the rom cook will have to address. it must be missing some form of dependency that sprint tv requires. I cook the stuff in like the dshow and such that sprint tv requires.

Re: [UPDATED] Sprint TV 100% working
 

Ok, i left the sprint tv alone, and was working on my text messaging. After installing you cab and a some registry edits to the address, i soft rest twice. I logged on to see if you wrote back and just tried Sprint Tv again and presto! it worked. If 1st you don't succeed, try try again, I GUESS.?:) THANKS AGAIN.