How To Find Sprint MSL

[slypher]

Originally Posted by loc37

I completed all the steps and looked for "RMSL" and it says not found??
What could I do?

You probably didn't let it log enough data. Turn the log on (via the reg edit) then let it run for 5 - 10 mins, then soft reset and look for the RMSL.

-s

[phoneman04]

thanks worked perfect for me

[knalluz]

Is there another way to access this? I dont have a HLKM folder or that log file at all?? Thanks.

[mharvey]

HLKM refers to the Registry. You need a registry editor in order to do this. I use Total Commander.

[Mojary]

i read the whole thread...but still going "huh"? ok...the MSL code is to the code to unlock the phone...correct? but the since the Sprint TP2 already comes unlocked as far as the SIM device is concerned, is this code to unlock the CDMA part of the phone? because i understand that even though the TP2's sim is unlocked, you're unable to use the sim device unless outside the US. will this code make it so that the phone will really be "unlocked"?

[nurbek02]

Originally Posted by pzztgotbagz

This is currently the only method that i know of to be avaliable for touch pro 2 and sprint....baf and getspc no longer work but this method does.



If you have a Sprint Touch Pro2 this is the only way to get your MSL other then to call sprint.
1. You need a Reg edit tool like PHM RegEdit or resco registy editor.
2. Go to HKLM\Software\HTC\ATDbgLog
3. Edit item called "Enable" and change from "0" to "1" (leave out quotes.) Save changes.
4. Exit PHM RegEdit or resco registy editor.
5. Shutdown/turnoff device.
6. Turn back on.
7. Once turned on leave running for 1 minute or longer (a log files is being created durring this time in the "\Atlog" folder.)
8. After 1 min go back into registry and set value back to "0". Make sure to save changes and exit PHM RegEdit or resco registy editor.
9. Shutdown device again and turn back on.
10. Varify that the Registry value is still set to "0", if not then repeat above steps and wait 1 min before shutting down the second time in step 9.
11. Now you should open Explorer and go to the folder "\Atlog" in the root directory of your device.
12. You shoould see a file called "ATDbg0" (the "0" may be another number like 1), if your using another file browser you may see the full file name include the "xtx" extention. This file is a text file and can be opened in Word mobile.
13. open the file and use the find feature to locate "RMSL", you should soon find a line item that includes a 6 digit number, this is your MSL code.

I tried it on mine and confirm it works without a problem. I used soft reset method holding down power and it worked fine. If you find this helpful feel free to thank me.

Worked for me perfectly! Although I had to repeat the step a few times.
I left it running for about 10 minutes after the 3rd step and some 5 minutes after the 8th step.
Thank you very much!
Now can I take my phone to my local carrier to input the necessary parameters (or PRL) through EPST?
Thank you again.

[nurbek02]

Originally Posted by Mojary

i read the whole thread...but still going "huh"? ok...the MSL code is to the code to unlock the phone...correct? but the since the Sprint TP2 already comes unlocked as far as the SIM device is concerned, is this code to unlock the CDMA part of the phone? because i understand that even though the TP2's sim is unlocked, you're unable to use the sim device unless outside the US. will this code make it so that the phone will really be "unlocked"?

No. I guess this is only to make changes to CDMA network settings.
For GSM you need to unlock differently for it to work with US carriers like AT&T, T-Mobile etc.
As I live in Uzbekistan, it worked perfectly for me. I inserted the SIM card and it found the network in seconds. Also it supports the HSDPA here! I' m enjoying the 3.6 Mbps internet connection now!

[danielsan127]

do you have to be on the sprint network in order to get the msl # when doing this method?

[mtnmedic]

Originally Posted by pzztgotbagz

This is currently the only method that i know of to be avaliable for touch pro 2 and sprint....baf and getspc no longer work but this method does.



If you have a Sprint Touch Pro2 this is the only way to get your MSL other then to call sprint.
1. You need a Reg edit tool like PHM RegEdit or resco registy editor.
2. Go to HKLM\Software\HTC\ATDbgLog
3. Edit item called "Enable" and change from "0" to "1" (leave out quotes.) Save changes.
4. Exit PHM RegEdit or resco registy editor.
5. Shutdown/turnoff device.
6. Turn back on.
7. Once turned on leave running for 1 minute or longer (a log files is being created durring this time in the "\Atlog" folder.)
8. After 1 min go back into registry and set value back to "0". Make sure to save changes and exit PHM RegEdit or resco registy editor.
9. Shutdown device again and turn back on.
10. Varify that the Registry value is still set to "0", if not then repeat above steps and wait 1 min before shutting down the second time in step 9.
11. Now you should open Explorer and go to the folder "\Atlog" in the root directory of your device.
12. You shoould see a file called "ATDbg0" (the "0" may be another number like 1), if your using another file browser you may see the full file name include the "xtx" extention. This file is a text file and can be opened in Word mobile.
13. open the file and use the find feature to locate "RMSL", you should soon find a line item that includes a 6 digit number, this is your MSL code.

I tried it on mine and confirm it works without a problem. I used soft reset method holding down power and it worked fine. If you find this helpful feel free to thank me.

Worked for me on my TP2 the first time. THANKS!

[kre8ve]

Originally Posted by pzztgotbagz

This is currently the only method that i know of to be avaliable for touch pro 2 and sprint....baf and getspc no longer work but this method does.



If you have a Sprint Touch Pro2 this is the only way to get your MSL other then to call sprint.
1. You need a Reg edit tool like PHM RegEdit or resco registy editor.
2. Go to HKLM\Software\HTC\ATDbgLog
3. Edit item called "Enable" and change from "0" to "1" (leave out quotes.) Save changes.
4. Exit PHM RegEdit or resco registy editor.
5. Shutdown/turnoff device.
6. Turn back on.
7. Once turned on leave running for 1 minute or longer (a log files is being created durring this time in the "\Atlog" folder.)
8. After 1 min go back into registry and set value back to "0". Make sure to save changes and exit PHM RegEdit or resco registy editor.
9. Shutdown device again and turn back on.
10. Varify that the Registry value is still set to "0", if not then repeat above steps and wait 1 min before shutting down the second time in step 9.
11. Now you should open Explorer and go to the folder "\Atlog" in the root directory of your device.
12. You shoould see a file called "ATDbg0" (the "0" may be another number like 1), if your using another file browser you may see the full file name include the "xtx" extention. This file is a text file and can be opened in Word mobile.
13. open the file and use the find feature to locate "RMSL", you should soon find a line item that includes a 6 digit number, this is your MSL code.

I tried it on mine and confirm it works without a problem. I used soft reset method holding down power and it worked fine. If you find this helpful feel free to thank me.

Works like a CHARM.....