help stuck at bootloader

[razorloves]

Originally Posted by nom303

and theres no fix at all?

i'm still waiting for you to give the results of my last suggestions.

[nom303]

the radio was for a gms and here is the version

Version: 4.49.25.77 (Telstra, Australia)

is there anyway out of this other than getting a new phone?

[razorloves]

Originally Posted by nom303

the radio was for a gms and here is the version

Version: 4.49.25.77 (Telstra, Australia)

is there anyway out of this other than getting a new phone?

still waiting
http://forum.ppcgeeks.com/showpost.p...93&postcount=8

[nrfitchett4]

why would you flash an australian radio to sprint???
Pull the battery, wait about 30min. put the battery back in, and try to turn it on while pressing the vol. down. If you can get back to a working bootloader, you can reflash to the CORRECT radio.
If not, your only other choice is to try and install a proper radio from the memory card. Apparently, this is a faster choice and sometimes if you can get it started, it will finish and not error out.
To do this, you need to find a copy of bootloader.exe (look in the stickies section of the cdma custom ROM section for the thread on flashing from the sd card).
put that bootloader.exe on the root of the storage card (aka not any folders). You will have to use a card reader to do this. Then transfer a SPRINT RADIO, found in the stock radio section, to your card. rename it RHODIMG.NBH.
Put the card back into the phone, pull the battery for a bit, put the battery back in and power on the device while holding the vol. down button.

If neither of these methods work, you probably bricked the phone and it will never work. On the bright side, if you have the TEP insurance, you can just run your phone over and get a new one for 100.00

[nom303]

hey razorlove, i tried what you said. when u said i was screwed i didnt really think u meant to still try. well i put sprint rom on sd card on the root, vol down and power and i still end up with the same message "code error". one thing i noticed was when its trying to boot into the grey screen to flash, its flashs grey and says loading....no image found...........could this mean anythang?

nrfit......where i downloaded it didnt say if it was gms or cdma. makes me feel dumb now lol

[razorloves]

Originally Posted by nom303

hey razorlove, i tried what you said. when u said i was screwed i didnt really think u meant to still try. well i put sprint rom on sd card on the root, vol down and power and i still end up with the same message "code error". one thing i noticed was when its trying to boot into the grey screen to flash, its flashs grey and says loading....no image found...........could this mean anythang?

nrfit......where i downloaded it didnt say if it was gms or cdma. makes me feel dumb now lol

that means you have the file named wrong or the sd card is not formated to fat32 or you have an incompatible mem card. did you rename the nbh to RHODIMG.nbh

or...just put the phone into bootloader mode and connect it to the computer and run the sprint rom exe

[nom303]

thanx yeah it is. formatting again now to try again. yeah i have it spelled right without 2.nbhs...when i hit poer up it goes str8 to the multi colored screen automatically with the error code and all that. i still have tried while pressing vol down but it des it on its own.

[nom303]

its there a way to use task20 thru sd card?

[razorloves]

Originally Posted by nom303

its there a way to use task20 thru sd card?

task29. no. you dont have access to a computer?

[nom303]

for some good godly reason, reforamtting my card worked to flash the sprint rom. =D> thank you very much razorlove, i really appreciate your help. MY PHONE HAS LIFE AND I LOVE YOU FOR IT. no homo lol