Mogul won't boot

[wheelna]

Think I got it figured out. The problem was that the device wasn't being recognized as being connected since it wouldn't boot. I found in another thread that by holding the power+camera button and then reseting that it would put the phone into bootloader mode. I just flashed to the official Sprint ROM and all seems to be working well again.

Edit: Oh and @PPC N00B I was using the Olipro2.4 bootloader before. I didn't know everything had to match up before, so thanks for the info.

[puff]

Originally Posted by wheelna

Think I got it figured out. The problem was that the device wasn't being recognized as being connected since it wouldn't boot. I found in another thread that by holding the power+camera button and then reseting that it would put the phone into bootloader mode. I just flashed to the official Sprint ROM and all seems to be working well again.

Edit: Oh and @PPC N00B I was using the Olipro2.4 bootloader before. I didn't know everything had to match up before, so thanks for the info.

np. glad you got it fixed

[wasfi]

i have a telus 4000 i was running upgrade to 2.4 but i ended with
RUUNBH at right top and
tita100
spl-1.07.0000
cpld-9 pc wont recognize and cant get out of this any help is highly appreciated

[cree]

Can you explain what you did in newbie terms? I really miss my phone and am really close to buying a new one

[wheelna]

I put the phone into bootloader mode manually by holding down the power and camera buttons and simultaneously reseting the phone using the soft reset switch on the bottom of the phone.
You should see the rainbow screen with the Olipro2.4 bootloader title now.
I then flashed with the official Sprint ROM from this thread:
http://forum.ppcgeeks.com/showthread.php?t=20705
After the flash was completed I always take the battery out for about 15 seconds, put it back then do a hard reset. (both softkeys + soft reset) Don't even align the screen when it boots back up, just move onto the ppcgeeks kitchen.

@wasfi It sounds like you need to use the exit bootloader tool found in the thread http://forum.ppcgeeks.com/showthread.php?t=9229

[puff]

Originally Posted by wheelna

I put the phone into bootloader mode manually by holding down the power and camera buttons and simultaneously reseting the phone using the soft reset switch on the bottom of the phone.
You should see the rainbow screen with the Olipro2.4 bootloader title now.
I then flashed with the official Sprint ROM from this thread:
http://forum.ppcgeeks.com/showthread.php?t=20705
After the flash was completed I always take the battery out for about 15 seconds, put it back then do a hard reset. (both softkeys + soft reset) Don't even align the screen when it boots back up, just move onto the ppcgeeks kitchen.

i swear i've seen this posted elsewhere... but i was feeling lazy today. thanks for posting your solution. perhaps this will help others reading this thread