Ringtone delayed

[gamer007]

Originally Posted by horizonstar

I have the same problem. Sometimes the ring flashes and the incoming call screen shows up, but the answer button doesn''t work at all, I have to watch it goes to the voice mail after a while. The signal is strong, the battery is more than 50%. Any solutions for the Telus users?

I made a thread over at XDA since I had the same problem. I got this solution that seems to be working for me.

http://forum.xda-developers.com/show...00&postcount=7

[proplayer44]

I tried that. I changed it from 3000 to 0. I'm not sure if that helped or not. There is still a delay but it is just one ring of delay. Before it may have been more like 1 1/2 to 2 rings. I would have to set it back to 3000 and retest to see if that helped.

[the7thson]

Originally Posted by gamer007

I made a thread over at XDA since I had the same problem. I got this solution that seems to be working for me.

http://forum.xda-developers.com/show...00&postcount=7

I made both these edits, waited a couple minutes to soft reset etc but it seemed to make no difference whatsoever in the time it takes to start ringing That seems to make sense since those entries seem to address the time it takes to hang up or answer AFTER it starts ringing. The original problem is that it takes forever to start ringing in the first place.

Will also try setting the polling time lower and report back after.

[horizonstar]

Originally Posted by gamer007

I made a thread over at XDA since I had the same problem. I got this solution that seems to be working for me.

http://forum.xda-developers.com/show...00&postcount=7

Thank you gamer007. I tried it and change both value from 3000, 2000 to 0. Today I still missed a few calls. I am using Juicy 2.2 rom.

[jaydubya]

Hi - I installed this cab and it reduced the ring delay to about 1 ring:

http://forum.xda-developers.com/showthread.php?t=258109

I used the "Normal" one (no change in volume).

Only possible downside is you have to use .wav for ringtones. However the cab provides you with all the stock ringtones etc. converted to .wav.

Cheers,

Jeff

[horizonstar]

Originally Posted by jaydubya

Hi - I installed this cab and it reduced the ring delay to about 1 ring:

http://forum.xda-developers.com/showthread.php?t=258109

I used the "Normal" one (no change in volume).

Only possible downside is you have to use .wav for ringtones. However the cab provides you with all the stock ringtones etc. converted to .wav.

Cheers,

Jeff

Thanks Jeff. I will give it a try. .wav ringtones occupy very large space

I installed Diamond Tweak to change the "ring time" to "without delay". But after some time, not sure when, it changed back to "with delay" automatically. Is there anyway to hold it?

[iggy]

Originally Posted by horizonstar

Thanks Jeff. I will give it a try. .wav ringtones occupy very large space

I installed Diamond Tweak to change the "ring time" to "without delay". But after some time, not sure when, it changed back to "with delay" automatically. Is there anyway to hold it?

Yep, I tried all the others too, but this cab worked for me.

[the7thson]

Originally Posted by jaydubya

Hi - I installed this cab and it reduced the ring delay to about 1 ring:

http://forum.xda-developers.com/showthread.php?t=258109

I used the "Normal" one (no change in volume).

Only possible downside is you have to use .wav for ringtones. However the cab provides you with all the stock ringtones etc. converted to .wav.

Cheers,

Jeff

I read through that post and it's not clear what the cab actually does to minimize the ring delay. Any idea what reg edits are being made to enable this?

Thanks.

[jaydubya]

Originally Posted by the7thson

I read through that post and it's not clear what the cab actually does to minimize the ring delay. Any idea what reg edits are being made to enable this?

Thanks.

Sorry, I don't know anything more about it than what is described in the thread. However you might try pm'ing the OP in that thread, as he is still active on xda-developers.