PPCGeeks - ░░░░ MightyROM.com ░░░░ Windows Phone® ░░░░

PPCGeeks (http://forum.ppcgeeks.com/index.php)

- CDMA TP2 Development (http://forum.ppcgeeks.com/forumdisplay.php?f=98)

- - ░░░░ MightyROM.com ░░░░ Windows Phone® ░░░░ (http://forum.ppcgeeks.com/showthread.php?t=79579)

Re: ║MightyROM.com║ ║Windows Phone®║ ║Sense UI║

[QUOTE}It isn't bricked. Bricked wouldn't even let you do all the things you've done. I suggest flashing to something else and then redownloading the rom and flash again.

Whatever your problem may be, it isn't the ROMs fault. As you can see, it works for many of us here[/QUOTE]

Quote:

Originally Posted by jwdaniels23 (Post 1654992)

Don't blame the ROM. It is something you did or did not do. The ROM has worked fine for so many. Mike does not cook duds.

My apologies if I gave the impression that my problems were related to the integrity of Mighty Rom's hard work. I was previously using his Sense UI 2.1 ROM with much success, so I didn't think that the ROM was to blame. I just wanted to see if anyone else had the same problem after a flash.

Somehow or another, the phone came back to life. I don't know if it had anything to do with coming upstairs (where the signal is better), or divine intervention. :angel4:

I've had to do a soft reset a couple of times due to hangups, and both times the carrier provision screen came up. I've cleared storage a couple of times, so this leads me to believe that I might have to follow a previous poster's advice on flashing the stock ROM and flashing back to MM's ROM.

Re: ║MightyROM.com║ ║Windows Phone®║ ║Sense UI║

Quote:

Originally Posted by rileyd5 (Post 1655717)

good question, I think you would need to remove the taskbar, install the 7bar cab, then install the taskbar of your choice to work properly. I could be wrong but I remember this is the correct method. now that you mentioned it, gonna try this now :) using bilbobrian taskbar. will report back.

Hey, that's how I do it and it works perfectly every time!:mrgreen:

Re: ║MightyROM.com║ ║Windows Phone®║ ║Sense UI║

Quote:

Originally Posted by hypeo (Post 1655768)

I guess I should just start using the multiquote!!

You don't have to, hypeo, we don't mind if you spam the forum! lol (I do it! ;-)) (jk - I just feel chatty sometimes! :toothy7:)

Re: ║MightyROM.com║ ║Windows Phone®║ ║Sense UI║

Quote:

Originally Posted by hypeo (Post 1655757)

how old is your TP2? what version of the Unlocker do you have? I believe the first versions of the unlocker had that hard reset problem. Re-download the unlocker make sure its R3 and reinstall if you have not done that. Other than that, I think your doing the right stuff by flashing to stock. Stock is like robutusin for phones.

I had that thought, but this is literally my first encounter with this kind of issue since the TP2 first came out. I probably am using the original unlocker though.

Re: ║MightyROM.com║ ║Windows Phone®║ ║Sense UI║

Quote:

Originally Posted by oldpueblo (Post 1655714)

I had a similar issue to those having hard reset issues. I was installing an app in the MS marketplace and for some reason the marketplace app just closed. So I re-opened it but the app I wanted to install seemed to be stuck in limbo trying to install, as if the marketplace somehow was stuck around in memory and hadn't actually closed. So I did a soft reset (having no other issues till now) and it never came back up, just hanging at the black Touch Pro 2 screen with the red text at bottom left. After soft resetting several more times with no effect (also took the battery out for a few minutes) I just put it back in the case since I wasn't home and couldn't remember how to do so hard reset.

Then after awhile I thought let me try it again, so I took my phone out of the case and it was sitting at the carrier provisioning prompt. So I can only assume that it had hard reset itself all on it's own. From then on though the sense UI still had some oddities about it. Text messaging would just not work as some others had mentioned. I wouldn't say it hung, but I could type a message and the send button just wouldn't work. Everything else about texting worked, I could close the message and save it as drafts, bring it back up, etc. I just couldn't send. Then I noticed my email previews no longer worked, it said click to view message. Then I noticed when my phone locked later on that it had the old style lock with the really big number buttons for some reason. So now I'm flashing back to stock, clearing storage, flashing to MR again, doing button hard reset, then clear storage and we'll see what I get. I just wanted to document for those that might be having similar issues in case there is something lurking beneath.

For the record, my phone had no customizations above the MR stock. All I did was configure my exchange information and a few standard apps like skyfire, bing, TCPMP, etc. Nothing that would be considered a tweak. I've also flashed every MR since the TP1 days and consider myself well versed in the process. We'll see if this info benefits anyone.

Quote:

Originally Posted by hypeo (Post 1655757)

I too had a psuedo hard reset occur after trying to install an app from MS Marketplace. The install seemed to have frozen so I tried to close out of Marketplace. That seemed to be messing with Sense, so I soft reset. First time, phone froze at the orange Windows boot screen, then soft reset again and it finally booted up. Strange though - all programs are installed and mail settings, but all my start menu icons are rearranged, and the MR Provisioning tool launched automatically. Also, my background was reset and the shortcuts the Home Sense UI page were gone.

So it didn't totally Hard Reset but seemed to have done a half hard reset...??? I came from MM's 2/10 sense 2.1 ROM and did NOT flash back to stock before flashing to this ROM. I did however clear storage though... I'm going to wait for more people's thoughts on all this and then do the full flash dance using Sprint's new stock ROM.

Re: ║MightyROM.com║ ║Windows Phone®║ ║Sense UI║

Quote:

Originally Posted by yvettejudd (Post 1655790)

You don't have to, hypeo, we don't mind if you spam the forum! lol (I do it! ;-)) (jk)

I like your Moral Support and our optimism! two thumbs up...

Re: ║MightyROM.com║ ║Windows Phone®║ ║Sense UI║

Quote:

Originally Posted by walter17 (Post 1655778)

Re: ║MightyROM.com║ ║Windows Phone®║ ║Sense UI║

Does anyone have a reg-edit to turn on auto rotation, or some kind of cab? I use the auto lock and when I get a call or something and look at my phone it usually in landscaped mode.:scratch::scratch:

Re: ║MightyROM.com║ ║Windows Phone®║ ║Sense UI║

Quote:

Originally Posted by hypeo (Post 1655757)

I'm still on the 10-29 limited public beta HSPL, and have no issues. What has been discissed is that not all flash chips are created equal. I haven't flashed stock since the beginning of November, and most of the time I forget to hard reset after I flash.

Z

Re: ║MightyROM.com║ ║Windows Phone®║ ║Sense UI║

Quote:

Originally Posted by Eschelon (Post 1655018)

Give me a few minutes and I'll make a cab that increases screen sensitivity, then I'll add all the cabs from the 5th post together into one cab

EDIT: All finished. Check the first post for the SUPERCAB

Can I just add cabs that I want installed all at once to my XDA UC folder then run the UC program? I use Sashami for my setup so the UC program doesn't get used for anything else.