H|July 4|.¸¸.·´¯`·.¸¸. Energy .¸¸.·´¯ 6.5|21916 / 6.5.X|29022 * Sense 2019

[DiscGo]

Originally Posted by _sandman

any build with numbers begining in 21xxx

all 28xxx versions - start button bottom

Originally Posted by Gelladuga69

21xxx has the Start at the top left.
28xxx has it at the bottom.

Thank you!!!!

[Gelladuga69]

Originally Posted by DiscGo

Thank you!!!!

No problem.
Also note that the builds with 21xxx are "stable."
28xxx are the "beta" builds.

[jdm627]

Originally Posted by tb5...

how do i get a custom wallpaper here?\

i see 'F' = blue wallpaper
i see 'D' = black gradient
i see 'B' = nrg honeycomb wallpaper

:\ ive put others in maxttm/wallpapers

what am i doin wrong...

edit: using 2.6 beta

Try to stablish your own wallpaper and use letter "D" I posted some wallpapers from this link or your favorites form Menu\Home Wallpaper\Weather Wallpaper and select from your Albums if you have is some in My Device,Storege Card or your own Camera Shots.

http://forum.ppcgeeks.com/showthread.php?t=96977


Other good point if you are using full screen and need it default NRG programs push in the top left corner and you'll see them

[jdm627]

Originally Posted by pauljohnson75

Running Dec 9 28011 2.5m is the best so far, finally have it set up the way I like. Only bug I have ran into is every once in awhile when I get a call it uses the default WM calling screen instead of the HTC slide to answer one, Anyone else have this happening?

Any problem about it.

[gmdphd]

I tried doing the flashdance and it did not solve the problem with the Caller ID screen not showing up when I received a phone call. I ended up flashing to the 21844 build for Dec 9 Standard and at least I have the Caller ID screen when I receive a call, although the slide to answer/ignore is scrolled off the screen.

Are there people out there with build 28011 Standard (not 2.5) who actually get a Caller ID screen when they receive a phone call?

Originally Posted by gmdphd

I have the same problem. When someone calls me, the Caller ID screen does not show up. I just hear the phone ringing and hit the hardware button to pick up the call. I used to be able to slide to ignore or answer the call AND the screen would show who was calling me. I no longer have this feature. I am using Dec 9, Build 28011, Standard 2.1

Originally Posted by aycc

Mine shows the caller ID, but the phone doesnt ring or vibrate. LOL.

Originally Posted by DaveTN

You can also press the right phone hard button to ignore the call...unless you have mapped it to do something else.

David

[DiscGo]

I just tried EnergyROM_21884_HERMAN_09.Dec.2009_Standard and I got a problem that I have experience a lot recently with the phone never fully booting up. It gets to the screen which says "Verizon Wirless Please wait, phone starting up" and never starts up.

I do get the words in red below but it never loads
up06 P DCBPZM -615010
B 02 R 1. 03. 09v
ps20 D 1.03

Is there a fix for this?

[DiscGo]

Originally Posted by DiscGo

Is there a fix for this?

I know I can install a different firmware and restore my phone. I am just trying to find a solution to allow me to use the newest firmware.

[777Braveheart]

Hi. I am on EnergyROM_21884_HERMAN_09.Dec.2009_StandardM2.5.ra r and love it. Thanks NRG!

I am sure these have been posted before but I cannot find the answers.

1- When I am on a call my screen goes blank quickly. How can I make sure the screen stays on until I hang up?

2 - How can I keep the kybd lights on? I tried one cab I found but it did not work. I guess it was for the GSM models.

[iknowsquat]

Originally Posted by DiscGo

I know I can install a different firmware and restore my phone. I am just trying to find a solution to allow me to use the newest firmware.

Apparently there is an issue with the current 21xxx builds and Verizon phones, doubt you'll have any luck. nrgz is aware of it and may have a solution soon.
I base all of this on reading posts, I obviously dont have personal experience as I'm on Sprint.

EDIT-Meant to say- I THINK the 21xxx issue for Verizon users stems from the native kernel nrgz is now cooking with, could be wrong on that.

Stability
IMO- the WM builds are stable, it's the manila version where most of the stability issues arise from, just my .02.

[DiscGo]

Originally Posted by winmonewbie

Stability
IMO- the WM builds are stable, it's the manila version where most of the stability issues arise from, just my .02.

Thanks for the tip.


Stupid Verizon!