H|July 4|.¸¸.·´¯`·.¸¸. Energy .¸¸.·´¯ 6.5|21916 / 6.5.X|29022 * Sense 2019

[J.eremy]

Originally Posted by fat boy

\
I added the newest sprint radio this morning to my phone and my battery life just went into the toilet. I am using the 8/1 rom and did not make any other changes other than going from the stock radio to the newest update and bam my battery life now REALLY sucks. I upgraded the radio thinking I was going to get improved battery life by I went from about a 10 hour use cycle to 4-5 hour. What the heck happened there?

I just did this today on my 8/1 "standard" Rom

the new radio today to v1.12.34F
http://forum.ppcgeeks.com/showthread.php?t=74422

and updated my PRL & PRI
http://forum.ppcgeeks.com/showthread.php?t=77799

installed Lumos v10 RC2
http://forum.xda-developers.com/showthread.php?t=450318

The results are about 1 mBit faster internet, and almost double the battery life with heavy use

try it out, i hope this post helps someone!

[swlaraut]

Since we are on the subject of Radios, here is my problem. I live in Oregon and I am with USCC. I drive I-5 for 500 miles a day from southern Oregon to Northern California. Quite frankly I have been disappointed with the stock radio. My titan did great, but the pro seems lacking. I want to experiment with different radios. My problem is this, I can only do a *228 tower reset with the stock radio. If I run a different radio will this get me into trouble with USCC? Do I need to do *228 with a non-stock radio? Is there a way around this problem? Also, is anyone familiar with my area and know which radios work best?
Boy thats a lot of questions, any help greatly appreciated.

[rootlinux]

Does this rom have the update prl and profile app?
Can't find it in system folder.

Another question.
Has anyone had the inbox load up on every soft reset?
Mine loads and opens on the screen on every soft reset.
Very odd.

Great rom and thanks for all the great info.

[Mr.KLeen]

Originally Posted by rootlinux

Does this rom have the update prl and profile app?
Can't find it in system folder.

Another question.
Has anyone had the inbox load up on every soft reset?
Mine loads and opens on the screen on every soft reset.
Very odd.

Great rom and thanks for all the great info.

yeah mine does the same thing with the soft reset. but not a big deal

[twe90kid]

what exactly does this PRL & PRI do? and why does it benefit when you update it?

[Mr.KLeen]

Originally Posted by twe90kid

what exactly does this PRL & PRI do? and why does it benefit when you update it?

good question, i would like to know as well

[NRGZ28]

Originally Posted by askwhy

Actually it is a reg edit you can UC or Sashimi:

Enjoy!

The value for 'checked' is '3' -- and thanks to rstoyguy for finding those when I was having trouble searching down a few keys.

Nice... Added to the kitchen

Originally Posted by pastert33

From the looks of the 2.1 manila thread at xda, there's a few things that need to be worked out. Hopefully we still get an update tonight!

Will try

Originally Posted by bkurek

just a follow-up on my previously posted verizon woes. perhaps, in my humble opinion, we could put a note in post 1 about low memory on the verizon device when loading this rom? just a thought. it really does interfere witn an otherwise fantastic creation. thank you.

How low are we talking ? Like.. 10-20% available ?

[jdm627]

Originally Posted by swlaraut

Since we are on the subject of Radios, here is my problem. I live in Oregon and I am with USCC. I drive I-5 for 500 miles a day from southern Oregon to Northern California. Quite frankly I have been disappointed with the stock radio. My titan did great, but the pro seems lacking. I want to experiment with different radios. My problem is this, I can only do a *228 tower reset with the stock radio. If I run a different radio will this get me into trouble with USCC? Do I need to do *228 with a non-stock radio? Is there a way around this problem? Also, is anyone familiar with my area and know which radios work best?
Boy thats a lot of questions, any help greatly appreciated.

You can use *228 with all radios if you want.

After installed the RADIO it's necesary cheking in ##33284# and check this points:
RX: Receive
Ec/Io: Signal to Interference Ratio.
http://forum.ppcgeeks.com/showthread...69545&page=674

Not all the RADIO'S working in the same way for all becuase it's important the location and the palce where you are if have a good signal.
And new RADIO dosen't means quality.
Attached ImagesStock and Verizon 1-03-09.jpg (67.9 KB, 10 views)FieldTrial Stock and Verizon 1-03-09.jpg (81.7 KB, 7 views)FieldTrial HDR Stock and Verizon

And the other good think it's AskWhy recomendationa about Lumos.
http://forum.ppcgeeks.com/showthread...69545&page=674

[iknowsquat]

Originally Posted by rootlinux

Does this rom have the update prl and profile app?
Can't find it in system folder.

Another question.
Has anyone had the inbox load up on every soft reset?
Mine loads and opens on the screen on every soft reset.
Very odd.

Great rom and thanks for all the great info.

Originally Posted by twe90kid

what exactly does this PRL & PRI do? and why does it benefit when you update it?

Originally Posted by jimecm

good question, i would like to know as well

AFAIK
Profile=Data services updates
PRL=up to date coverage with towers
On post #1 or #2 are listed "Goodies" these are cabs for various carriers. I'm on Sprint. This is the easiest way I know of to get the updates. After running the cab you will have icons under Start>Settings>Connections
Hope this helps.

EDIT:Sorry "Goodies" are on Post #3
EDIT2:Yes my Inbox pops up as well, no biggie IMO

[jdm627]

Originally Posted by winmonewbie

AFAIK
Profile=Data services updates
PRL=up to date coverage with towers
On post #1 or #2 are listed "Goodies" these are cabs for various carriers. I'm on Sprint. This is the easiest way I know of to get the updates. After running the cab you will have icons under Start>Settings>Connections
Hope this helps.

EDIT:Sorry "Goodies" are on Post #3
EDIT2:Yes my Inbox pops up as well, no biggie IMO

To update your PRL,
1. Make sure you're connected to the Sprint network and you're not roaming.
2. Dial *2 on your Sprint phone.
3. Ask the Customer Solutions Rep for a "PRL update"