Jd's Easy Ask Kitchen (rom No Longer Supported) - Page 19

**rstoyguy** · #**181** (**permalink**) 05-09-2009, 05:56 PM

Quote:

Originally Posted by jakdillard

well there's your culprit runcc runs while you setup your phone if you let it sit then it finishes you'll just have to align your screen after the first reset

and every other reset. I downloaded this yesterday morning again and build with just what you had checked by default, I too let it sit too long, and I had to re-align the screen after every soft reset as well... I had to download one of my roms with opera and flash it since I was at work. Dreadful. lol...

**GoodGets** · #**182** (**permalink**) 05-09-2009, 06:33 PM

Do we even need to include runcc? or even AutoRun for that matter?

An even better question, is what is essential for us to include?

I'm assuming something like HTC bootlauncher is, but what about something like the config options?
Config EndUser?
Config JDClean?
Config JD-HTC-SPCS?

Do we have to include one of those? Or can all of them be unchecked? I assume if I want to do everything manually myself, I could just check enduser, but I'm not exactly sure what it does. Is there a place where some of this is explained in a little more detail? However, I think those are all the options in the kitchen that I'm not sure about.

Edit: What's HTC Scroll? (is that for non touchscreen devices?)

**GoodGets** · #**183** (**permalink**) 05-09-2009, 06:37 PM

regarding the twin applications, is this the correct answer?

Quote:

Originally Posted by captblaze

they look like newer versions of the apps in the kitchen

**jakdillard** · #**184** (**permalink**) 05-09-2009, 06:55 PM

Quote:

Originally Posted by GoodGets

regarding the twin applications, is this the correct answer?

that are exactly what they are ... didn't have time to clean the kitchen

**jakdillard** · #**185** (**permalink**) 05-09-2009, 06:56 PM

Quote:

Originally Posted by rstoyguy

and every other reset. I downloaded this yesterday morning again and build with just what you had checked by default, I too let it sit too long, and I had to re-align the screen after every soft reset as well... I had to download one of my roms with opera and flash it since I was at work. Dreadful. lol...

did you hard reset ? I have only ran into this once and after that first reset everything was fine

**jakdillard** · #**186** (**permalink**) 05-09-2009, 06:58 PM

Quote:

Originally Posted by GoodGets

Do we even need to include runcc? or even AutoRun for that matter?

An even better question, is what is essential for us to include?

I'm assuming something like HTC bootlauncher is, but what about something like the config options?
Config EndUser?
Config JDClean?
Config JD-HTC-SPCS?

Do we have to include one of those? Or can all of them be unchecked? I assume if I want to do everything manually myself, I could just check enduser, but I'm not exactly sure what it does. Is there a place where some of this is explained in a little more detail? However, I think those are all the options in the kitchen that I'm not sure about.

Edit: What's HTC Scroll? (is that for non touchscreen devices?)

HTC Scroll is needed for menu enhancement and notification manager

**GoodGets** · #**187** (**permalink**) 05-09-2009, 07:01 PM

Quote:

Originally Posted by jakdillard

HTC Scroll is needed for menu enhancement and notification manager

Ok, thank you.

What about the other stuff:
runcc?
Autorun?
the config options?

**jakdillard** · #**188** (**permalink**) 05-09-2009, 07:10 PM

Quote:

Originally Posted by GoodGets

Ok, thank you.

What about the other stuff:
runcc?
Autorun?
the config options?

runcc is just another autorun option that works a little better with the updated versions of 6.1 and 6.5 you can use it or the standard autorun to do all of the customizing as far as installing xml's cab's stuff like that without some form of autorun UC will not work as far as config options make your own or you can use mine

**GoodGets** · #**189** (**permalink**) 05-09-2009, 07:33 PM

Quote:

Originally Posted by jakdillard

runcc is just another autorun option that works a little better with the updated versions of 6.1 and 6.5 you can use it or the standard autorun to do all of the customizing as far as installing xml's cab's stuff like that without some form of autorun UC will not work as far as config options make your own or you can use mine

Yeah, I'm familiar with runcc and autorun, but wasn't sure if it affected anything else other than the auto customizations after a reflash. Since I just plan to sashimi everything over, I was just making sure I could leave it out.

Thanks.

#**190** (**permalink**) 05-09-2009, 08:48 PM

Hey guys I posted this yesterday. It got moved and then buried. I think this is pretty important unless we already know about this and I am a little behind. A fix has been found for the htc dialer problems so it can be used with the 6.5 themes without any problems. I have been using this method for 2 days without any problems. The theme remains un affected and the htc dialer works perfectly....

Yesterdays post
omnicronx over in the diamond thread discovered 2 reg entrie that he suspected were the cause the htc dialer conflict. Here is a quote from his thread. "This reg:
HKEY_CURRENT_USER\Software\Microsoft\Today\Bubble: BubbleBorderThemeImage
set to '\Windows\classicblue_msgboxBorder.jpg' with calcs default theme is the main problem. When this entry is deleted the bubble no longer pops up over the slide to answer screen, but there the words 'incomming call' still appear from the bubble popup.(i.e this is the big offender)
This reg:
HKEY_CURRENT_USER\Software\Microsoft\Today\Toast:T oastBorderThemeImage
currently set to \Windows\classicblue_toastBorder.jpg
Removing this entry gets rid of the 'incomming call' text, resulting in nothing but HTC slide to answer showing up when the phone is on and you get a call.
The problem here is these reg entries obviously reference image files for the new context menus. The thing is I can't see any changes for the life of me, even after I delete these entries (and soft reset multiple times to make sure) everything seems to work fine, and I still have the fully working context menus, borders and all. I've gone through as many context menus as I could and I could still see no difference (between reg entries there and delete).
You guys can try it out, if there are no issues then perhaps we need to make 6.5 themes with this in mind. (at least for those that want to use the HTC dialer)
edit: or perhaps even find the underlying issue, I find it strange that these pictures cause the bubble to come into focus. "

Turns out he is right. Removing these entries seems to have no ill effect on the 6.5 themes and the htc dialer works correctly without the windows bubble popping up. Check out his post in calk thread here... http://forum.ppcgeeks.com/showthread...44494&page=613

I took it one step further and edited the file in the kitchen so just locate and replace "mxipcold_wpc_2.provxml" with the one I have attached and everything seems to b ingood working order. Please thank him for his discovery... I posted this here because I know we all wanted this problem solved and it appears to be. Enjoy...