[ROM] [FINAL] [06.26.09] MightyROM4 w. OEM BASE Included

[IsLNdbOi]

Originally Posted by Maverick77

Unrar this file into a folder called kitchen (Or whatever you want to call it). Then unzip the MightyROM4 XIP/SYS to that folder and the MightyROM4 OEM Base into that same folder. It should look like this when you are all finished..

Ok so I created a folder and named it "Kitchen", then extracted the three zip files into it. I have the Build_Rom.bat and BuildInfo.txt files, but I also have an "OEM.cer" file and 81 folders.

[Rourke Swift]

OK mate, I'll try to break this down for ya step-by-step like I did it... this might be like a mini "How-To MR4 Kitchen" for ya.

1. The first thing you do is extract the kitchen file Maverick attached for you here into it's own folder. This is your "kitchen."

2. Next, unzip the MightyROM4_21051.rar file. You only want the SYS folder and the ROM_Herman folder from here. Put the SYS folder in your kitchen. Rename the ROM_Herman folder to just "ROM" and put that in the kitchen too.

3. Next, create a folder inside the kitchen called "OEM," and unzip the MightyROM4_OEM_6.25.09_Herman.rar into that OEM folder you just made.

Almost there! But one last thing that hasn't really been covered... you need an RUU folder too! Don't worry, I got you covered.

4. Go ahead and create a folder called "RUU" in the base kitchen directory, then extract the contents of the attachment I've provided into it.

If everything went right, you'll have a kitchen that looks just like the picture Maverick posted. Now, run the Build_ROM.bat file from the base directory, press 1, and you're ready to start building.

Something to note: as Mighty himself said, most of his OEMs do not include an options.xml file so BuildOS will look pretty sparse. Adding and Removing OEMs is another topic for another post and probably another poster.

Good luck!

[Maverick77]

Originally Posted by Rourke Swift

OK mate, I'll try to break this down for ya step-by-step like I did it... this might be like a mini "How-To MR4 Kitchen" for ya.

1. The first thing you do is extract the kitchen file Maverick attached for you here into it's own folder. This is your "kitchen."

2. Next, unzip the MightyROM4_21051.rar file. You only want the SYS folder and the ROM_Herman folder from here. Put the SYS folder in your kitchen. Rename the ROM_Herman folder to just "ROM" and put that in the kitchen too.

3. Next, create a folder inside the kitchen called "OEM," and unzip the MightyROM4_OEM_6.25.09_Herman.rar into that OEM folder you just made.

Almost there! But one last thing that hasn't really been covered... you need an RUU folder too! Don't worry, I got you covered.

4. Go ahead and create a folder called "RUU" in the base kitchen directory, then extract the contents of the attachment I've provided into it.

If everything went right, you'll have a kitchen that looks just like the picture Maverick posted. Now, run the Build_ROM.bat file from the base directory, press 1, and you're ready to start building.

Something to note: as Mighty himself said, most of his OEMs do not include an options.xml file so BuildOS will look pretty sparse. Adding and Removing OEMs is another topic for another post and probably another poster.

Good luck!

That's what I was trying to say! Forgot all about the RUU folder and that the OEM's dont' extract into and OEM folder. Thanks Rourke!

[doireallyhavetodothis]

::Possible Bug Report::

Using this ROM with the Telus Radio on a Touch Pro with Sprint.
I goto tuned.mobi using Internet Explorer and stream a radio station, doesn't seem to matter which one, media player opens up and plays the stream fine but after about 5 mins it ends. Player says END. I can go back, connect again and play for another 5 mins and then it stops again. Hard reset my phone about 6 times, no other applications installed. Can anyone else replicate this problem or know what's going on?

UPDATE:: Using the Sprint stock Radio and Stock ROM I cannot replicate this problem.

[Maverick77]

Originally Posted by doireallyhavetodothis

::Possible Bug Report::

Using this ROM with the Telus Radio on a Touch Pro with Sprint.
I goto tuned.mobi using Internet Explorer and stream a radio station, doesn't seem to matter which one, media player opens up and plays the stream fine but after about 5 mins it ends. Player says END. I can go back, connect again and play for another 5 mins and then it stops again. Hard reset my phone about 6 times, no other applications installed. Can anyone else replicate this problem or know what's going on?

UPDATE:: Using the Sprint stock Radio and Stock ROM I cannot replicate this problem.

I don't see how the radio could effect this, but you might try switching to the Sprint radio. You can do that without having to flash the ROM. Might be worth a try.

[doireallyhavetodothis]

Originally Posted by Maverick77

I don't see how the radio could effect this, but you might try switching to the Sprint radio. You can do that without having to flash the ROM. Might be worth a try.

With the Sprint Radio and ROM I was able to stream a radio station for over 20 minutes. Flashed to this MightyRom, hard reset a couple times, and the problem came back.

[doireallyhavetodothis]

Originally Posted by doireallyhavetodothis

With the Sprint Radio and ROM I was able to stream a radio station for over 20 minutes. Flashed to this MightyRom, hard reset a couple times, and the problem came back.

Happens with Mighty5 too.

[IsLNdbOi]

I've never used UC before and just tried it with this ROM. Does this ROM have / support UC?

I've created my SDConfig.txt file and placed it on the root of the card. When I did a hard reset, none of the stuff on my SDConfig file was installed. I've placed all of the cab files in a folder named "Apps" (without the quotes) on the root of the card.

To get UC to work, is there anything else I need to do besides placing this SDConfig text file in the root of the card and hard resetting?

[Maverick77]

Originally Posted by IsLNdbOi

I've never used UC before and just tried it with this ROM. Does this ROM have / support UC?

I've created my SDConfig.txt file and placed it on the root of the card. When I did a hard reset, none of the stuff on my SDConfig file was installed. I've placed all of the cab files in a folder named "Apps" (without the quotes) on the root of the card.

To get UC to work, is there anything else I need to do besides placing this SDConfig text file in the root of the card and hard resetting?

Do you change the lock to disabled half way through for an app that requires user input to install? It may be due to the lock/unlock...I know you are suppose to have it set up that way, but I never got it to work. I only have one Lock and then Lock Disabled at the end. Here is a copy of what my SDConfig.txt looks like.

[IsLNdbOi]

Yeah, I have some apps. that require user input during install, that's why I have the lock disabled and enabled in there.