unlock, flash and even relock your TP via the SD card!

[tigerwoody]

For those who have a bricked phone, stuck in a loading screen, or bootloader screen, cant flash or lock/unlock with a sdcard, ...this ROM helped me get my phone working agian after 8 hours of trying to figure out

Sprint_Elite_RC1_RC1_21234_20090624

[cornelious2]

flashing ANY compatible rom when your in the boot cycle gets you out. its in the guide already. an alternate option is to connect your phone to a computer that active sync works on and use an RUU to get you out. Also don't be afraid to PM me directly if you need help, ive helped quite a few people that were confused. even in person sometimes if their close enough.

[abednego]

I'm trying to flash my first custom ROM via my SD card, but I've ran into an issue ...

I have RAPHIMG.nbh (renamed from the Mighty ROM I downloaded) in the root of my SD card... and I copied over SSPL-Manual.exe into the root of my device (not card)

But when I try to enter the loader (by hitting VOL DOWN + POWER + RESET) its stuck at the "Loading..." gray screen...

Any suggestions?

[razorloves]

Originally Posted by abednego

I'm trying to flash my first custom ROM via my SD card, but I've ran into an issue ...

I have RAPHIMG.nbh (renamed from the Mighty ROM I downloaded) in the root of my SD card... and I copied over SSPL-Manual.exe into the root of my device (not card)

But when I try to enter the loader (by hitting VOL DOWN + POWER + RESET) its stuck at the "Loading..." gray screen...

Any suggestions?

Is your phone unlocked?
Also, you only use those three buttons for when you don't use the SSPL-Manual.exe file.

[abednego]

Originally Posted by razorloves

Is your phone unlocked?
Also, you only use those three buttons for when you don't use the SSPL-Manual.exe file.

Thank you for the reply.

My phone SHOULD be unlocked.

When I run SSPL-Manual.exe from the home dir ... it gives me the following:

SPL-0.25.C-SSPL

Judging by the other thread

http://forum.ppcgeeks.com/showthread.php?t=42503

Is that the old version that has splash screen issues?

[razorloves]

Originally Posted by abednego

Thank you for the reply.

My phone SHOULD be unlocked.

When I run SSPL-Manual.exe from the home dir ... it gives me the following:

SPL-0.25.C-SSPL

Judging by the other thread

http://forum.ppcgeeks.com/showthread.php?t=42503

Is that the old version that has splash screen issues?

to verify that you are unlocked properly, you need to remove mem card, then put phone into bootloader mode by pressing the three buttons you mentioned, then look at the spl version. it should say 0.37.cmonex if you did it right.

[abednego]

Originally Posted by razorloves

to verify that you are unlocked properly, you need to remove mem card, then put phone into bootloader mode by pressing the three buttons you mentioned, then look at the spl version. it should say 0.37.cmonex if you did it right.

Thank you very much for the help. I removed the card, and it says the following:

RAPH800
SPL-0.37.0000
MicroP-Hermann (LED) v0c85
MicroP-Hermann (KEY) v0685
PSOC-Raph STAGE_EVT v20

[razorloves]

Originally Posted by abednego

Thank you very much for the help. I removed the card, and it says the following:

RAPH800
SPL-0.37.0000
MicroP-Hermann (LED) v0c85
MicroP-Hermann (KEY) v0685
PSOC-Raph STAGE_EVT v20

You're very welcome.
So, you still need to unlock your phone.

[abednego]

dfsd

Originally Posted by razorloves

You're very welcome.
So, you still need to unlock your phone.

How come my phones not unlocking?

I downloaded SSPL-Manual.exe from:

http://forum.ppcgeeks.com/attachment...1&d=1225521707

I copied it over to the home directory of my device, and when I click on it to run... it says the following:

Security Unlocked

RAPH800
SPL-0.25.C-SSPL
MicroP-Raph (LED) v0C85
MicroP-Hermann (KEY) v0685
PSOC-Raph STAGE_EVT v20

And... nothing else.... I have to reset it.


*EDIT*

omg nvm. looks like I need TWO nbh files ... one for the unlocker... and one for the image.

[razorloves]

Originally Posted by abednego

dfsd

How come my phones not unlocking?

I downloaded SSPL-Manual.exe from:

http://forum.ppcgeeks.com/attachment...1&d=1225521707

I copied it over to the home directory of my device, and when I click on it to run... it says the following:

Security Unlocked

RAPH800
SPL-0.25.C-SSPL
MicroP-Raph (LED) v0C85
MicroP-Hermann (KEY) v0685
PSOC-Raph STAGE_EVT v20

And... nothing else.... I have to reset it.


*EDIT*

omg nvm. looks like I need TWO nbh files ... one for the unlocker... and one for the image.

you only need one nbh file. the unlocker. that's it.

you put the unlocker nbh file on the memcard. put the sspl-manual.exe file on the device. open file explorer on your phone and open the sspl-manual.exe file and the unlocking will begin.