unlock, flash and even relock your TP via the SD card!

[neudof]

Sprint Touch Pro Unlocked!
That could not have been any easier!
Great Job on this cornelious2!!!

[cornelious2]

glad I could help

[mikejones13]

Holy Snapple!!!! That was the easiest thing I think I ever have done on a phone besides turn it on. Thanx so much for this. Toss Up The Duces!!!

Be Easy....... MikeJones13

[cornelious2]

chea, its so simple I was shocked someone didn't come up with it sooner to be honest.

[Rourke Swift]

Edit - Fixed.

[newbie2398]

Folks,
Here is my steps to unlock HTC Touch Pro via SDHC card. It took approx 4 hrs for me to figure out as I and problem with ActiveSync and Windows Mobile software on Vista.

How to Unlock HTC Touch Pro and Upgrade to MightROM5 via SD Card
================================================== ===============

Phase I
-------

Connect HTC Touch Pro via USB cable to PC ( activesync or Window Mobile)

Copy c:\HTC Touch Pro\UNLOCK-STEPS\SSPL-Manual to Phone memory (Do not copy on SD Card)

Format any size of Micro SDHC card using FAT32 format

Copy C:\HTC Touch Pro\UNLOCK-STEPS\RAPHIMG.nbh to SD CARD (only this file must exist on card. It should be approx 516KB in size)


Put above SDHC card in memory slot

Press Power button + down volume button + press reset button

Screen should say - press power button to unlock

Now phone is unlocked

Phase II
--------

Remove SDHC card from the slot and put back in to computer

Format SDHC card using FAT32 format

Copy C:\HTC Touch Pro\UNLOCK-STEPS\RRU_signed.nbh file to SDHC card (129MB size)

Rename RRU_signed.nbh to RAPHIMG.nbh

put SDHC card to memory slot of HTC Touch Pro

Press Power button + down volume button + press reset button

Upgrade Process should start

After approx 10 min, Upgrade will be completed

IT should say OK on screen

remove SDHC card hard reset the phone by removing battery

follow the screen prompt to set the phone

That's all.

Enjoy !!!!!

I decided to post this as I spent lot more time to figure out.

[fnakfhe]

*************************************************
I have already unlocked my Touch PRO. (VIA active sync method)
but i need your help guys please come together on this for me!
*************************************************

Ok, lets talk about UNLOCKING our phone!

NOW I have a touch vouge (my touch pro is just fine ) i would like to unlock the HTC touch vouge, but the stupid USB connector on the phone is broken. So i can NOT use the active sync method

The usb connector CAN only charge the phone, but the active sync does NOT work!

So I used the manual.exe form the memory on device (found on this thread/post), and went to http://forum.ppcgeeks.com/showthread.php?t=20370
to find the .nbh file for unlocking the phone.

I put the .nbh file for the touch vouge in the 1gb SD card formated to fat32.

Than i ran the manual.exe file from the main memory of the device,

The phone locks up and does not respond, i have to softreset with styles.

Any idea or help please?

Can we use the SSPL-Manual.exe on the HTC touch vouge to unlock ?

[cornelious2]

the vogue is not the same type of phone as the touch pro, you need the pieces from the vogue unlocker if you want to unlock the vogue. the pieces are not compatable.

[fnakfhe]

Originally Posted by cornelious2

the vogue is not the same type of phone as the touch pro, you need the pieces from the vogue unlocker if you want to unlock the vogue. the pieces are not compatable.

I know its not the same, the .ROM file is diffrent!

I was useing the VOUGE ROM, but the manual.EXE from the touchPRO,

Where can we get a manual.exe (the progam you have been running on the HTC PRO main memory) but i need it for the vouge phone!

I already tested the Manual.exe for the HTC PRO but the .EXE file is not compatable!

[ppcg-Clayton]

Thanks for putting this up Cornelious. I'll go find that Hard-SPL thread shoot CMONEX a thanks too.

I did have 1 hitch though: I had an error something about
"MicroP-Wrong Platform" after running "SSPL-Manual.exe".
I tried my 2 GB mico SD and my 8 GB MicroSD and had the same result with both.
Both cards had a good bit of data and PalmOS and Windows Mobile programs on them.
I'm sure the 8 GB has to be formatted FAT32. I think the 2 GB was another one (FAT12 or FAT16) but I'm really not sure.

I just re-formatted the 2 GB in a WinXP machine as FAT32 using my OCZ Trifecta SD-card-sized-microSD-reader/writer (very cool gadget. My 8 GB microSD works in it too!) and all was well.