Originally Posted by meeklo062704 (Post 977369)

I wasnt sure which thread to put this in because its not specific to one rom. I've been through 3 roms: Silence v3.3, MightyRom 06.09.09, and now Calkulins clean rom. But my tp always shows the rom version as ATR 3.0. Its listed that way on the RUU before i flash and on the device information. Has this ever happened to anyone before?

Originally Posted by razorloves (Post 977395)

i believe it's because the ATR flashed the boot splash, which only the shipped rom does (and a couple other random custom roms). Just flash back to sprint shipped rom and it should clear that up. then you can flash back to whatever custom rom you want.

Originally Posted by meeklo062704 (Post 977495)

My main concern was being able to change it in case needing to return for a warranty issue. It wont have any effect on how the roms run will it?

Originally Posted by tee4152000 (Post 977844)

I flash my ROM but for some reason WM 6.5 will not allow me to dail out unless the number is in my contact list. Is anyone else having this problem

Originally Posted by ebuechler3 (Post 982712)

i need to flash my friends phone back to sprint stock... i cant find the thread... do i need the sprint stock rom, the sprint radio rom, and the relocker? any links? thanks

Originally Posted by jakdillard (Post 498488)

NOTE -- PLEASE MAKE SURE YOU UNLOCK YOUR PHONE BEFORE FLASHING TO A CUSTOM ROM!
USE THIS THREAD TO UNLOCK --wow

see post 50 for indepth detaild instructions provided by egoldy

How to Flash Via PC:

1.download the ruu.zip attachment
2.unzip to your desktop
3.then in the newly created RUU directory add the rom of your choice - (copy the RUU_Signed.nbh to desktop\RUU)
4.Place phone in bootloader mode (power button while holding volume down button)
5.open the ROMUpdateUtility.exe
6.follow the RUU on screen instructions from there

If that fails please trying these directions (thanks sn0b0ard)

1. Establish active sync connection (this is the most important step).
2. Copy the RUU_signed.nbh into the RUU folder.
3. Run ROMUpdateUtility.exe and follow the steps on screen to flash ROM.
4. Once the phone reboots, go through Windows Mobile setup and let it finish.
5. Perform a hard reset (hold power, volume down, and center d-pad).
6. Complete the Windows Mobile setup and start using your new ROM!


Flash from microSD Card (Thanks to MadlyAlive):

1. Make sure you backup anything that is necessary to your day to day operations! At a minimum, please perform an ActiveSync to Outlook or your Exchange server prior to flashing!
2. Rename the custom ROM NBH file from RUU_Signed.nbh to RAPHIMG.nbh
3. Copy RAPHIMG.nbh to the root of your microSD Card.
4. Hold the Volume Down and Power button simultaneously. While you're still holding those 2 buttons, press the reset button with your stylus.
5. When your Touch Pro tells you to do so, press the power button to begin the flash process. If you do not get the message to press the power button to flash, there is a mistake in the name of the NBH file or you do not have the file at the root of your microSD card.
6. When flashing is complete, perform a soft reset.