Touch Pro CDMA Hard-SPL brought to you by CDMA Raphael Elite Team

[k0tix]

Originally Posted by cmonex

UPDATE: VZW SPL posted. (there will be an all-in-one unlocker later, but until then please read the instructions and decide which file is for your device.)


CDMA Raphael Elite Team (see: http://forum.ppcgeeks.com/showthread.php?t=41345) presents exclusive Touch Pro CDMA Hard-SPL to you!

SSPL, HSPL, relocker made by cmonex, Wrappers by olinex, SD flasher and relocker (coming soon) by no2chem. thanks to NexVision (btw I'm really sorry), zule/Shadowmite and no2chem for testing!!!

there are three HSPL's now (for the non-verizon ones it is a similar scene to Diamond_C).

1. 0.25.MFG for Sprint/Alltel/Telus/Bell, for hackers only, because otherwise, it is too old, apparently has splashscreen issues and only 128MB ram. but it has mw, it has rtask, etc. etc.

2. 0.37 for Sprint/Alltel/Telus/Bell, for other people, this has no screen issues but no MFG commands.

3. 0.35 for Verizon touch pro's ONLY.


Important:

first, if you have GSM Touch Pro/Raphael (NOT CDMA, NOT SPRINT/VERIZON/ALLTEL/TELUS/BELL), this will brick your device.
to download a compatible hardspl package for gsm touch pro you can go to forum.xda-developers.com.
but if you have CDMA Touch Pro/Raphael, then you have to use this hardspl, not the one at xda-developers!!!


preparations before flash:

1) make sure you have .NET framework installed on your PC! if not, get it from http://www.microsoft.com/downloads/d...DisplayLang=en
2) if you have vista, WMDC update is recommended: http://www.microsoft.com/windowsmobi...ce-center.mspx
3) now decide which Hard-SPL you want to flash. if you have Verizon, flash VZW package (from verizon attachment). if you have Sprint, Telus or Alltel or Bell, flash default package (Raphael_CDMA_HSPL_037.zip).


instructions:

1) download Hard-SPL package from attachment, extract to an empty folder.
2) you must Have Phone Synced with PC in Windows Mobile!
3) run HardSPL exe that you downloaded before.
4) follow steps in the RUU, and check on the device for prompts after PC shows loading bar.
5) it should go to tricolour screen now and say 0.25.C-SSPL or for Verizon devices it should say 0.35-C-SSPL.
6) SPL flashes, device automatically reboots, job done.
7) to confirm you got it installed, go into bootloader mode (tricolour screen!) and verify the screen shows 0.35.CMONEX or 0.37.CMONEX (or 0.25.CMONEX MFG).

NOTE: you will not see the SPL version during normal boot, that is the OS version, not SPL!
to enter bootloader mode to see version: with the device turned on, press and hold the volume down button along with the power button, then press the reset button with the stylus tip, then release the volume down and power buttons when bootloader tricolour screen appears.

NOTE 2: anyone having problems with the device entering SSPL automatically, please copy SSPLManual.exe from the SSPLManual.zip attachment to the device and run it. then once the screen is in SSPL, run RUU manually. i.e. you run the RUU on the PC, if it isn't obvious.
make sure to get SSPL-Manual specifically for Verizon phones from the verizon package.

NOTE 3: this is unsigned Hard-SPL. no limitations on flashing ROMs or radio packages. also, this has overwrite protection, if someone needs to revert to stock SPL for warranty reasons, a stock SPL downgrade package is also available here.

NOTE 4: do not use this RUU to flash anything else! this is only intended for flashing the Hard-SPL.

NOTE 5: use Relocker *only* if you need to return the phone for warranty. only use it as last step - after reflashing stock OS and radio. Default relocker is for Sprint etc, Raphael_CDMA_VZW_Relocker in the verizon package is for Verizon touch pro's.

--------------------------------------------------------------------------

Finally, Please Donate to the CDMA Raphael Project Team - http://shorl.com/frastijeketrebo - Thanks!!

I followed above directions and now my phone goes to touch pro screen during boot up and shuts off and keeps repeating over and overwhat did i do? is it bricked? is there a way to rerom it to the stock sprint ron like this?

HELP PLEASE!!!!

[nyclegend20]

i cant relock my phone
i flashed to the stock rom then did this
i ran the relocker here
and then went to the tri color screen and on the top it shows
securirty unlocked
then it shows
raph800
spl-.37
MicroP Hermann ( led) v8c85
MicroP-Hermann (ley) v0685
psoc Rph stage_evt v20

im worried about the top showing securitty unloked
i have to send this back to them cause they are sending me a new one.
i need help asap.
thanks
need to send back today
so they will get it within 10 dys otherwise i get charged.

[nuffstylez]

To everyone with the infamous connection problem, 260 or 202, follow the instructions from post 456. This is what worked for me.

[flyers2114]

Originally Posted by nyclegend20

i cant relock my phone
i flashed to the stock rom then did this
i ran the relocker here
and then went to the tri color screen and on the top it shows
securirty unlocked
then it shows
raph800
spl-.37
MicroP Hermann ( led) v8c85
MicroP-Hermann (ley) v0685
psoc Rph stage_evt v20

im worried about the top showing securitty unloked
i have to send this back to them cause they are sending me a new one.
i need help asap.
thanks
need to send back today
so they will get it within 10 dys otherwise i get charged.

security un-locked means nothing....you are good...

[puff]

Originally Posted by k0tix

I followed above directions and now my phone goes to touch pro screen during boot up and shuts off and keeps repeating over and overwhat did i do? is it bricked? is there a way to rerom it to the stock sprint ron like this?

HELP PLEASE!!!!

can you get into bootloader?

Originally Posted by nyclegend20

spl-.37

you left out part of the SPL, btw security unlocked was there all along!!!
if it says 0000 after the SPL then you are locked, cmonex means your unlocked

[LoWw]

A little confused with the unlockers? What is the difference between .25 and .37 beside the splash screen problems? What does MFG stand for and what can it do for me? I just want to unlock the phone and flash custom roms!!! I have flashed before flashing my Vogue!!

[Kevlar3D]

it would probably be really helpful to put this info in the initial post:
http://forum.ppcgeeks.com/showpost.p...&postcount=456

[jamesfrom818]

I keep getting the 260 connection error despite following the advice of post 456. Forget it. I'm fine with my stock Touch Pro.

[newvet]

sorry if this has been mentioned

Locking TP via SD also works by following the first thread. The only change was I re-named the RUU_Signed.nbh from the Raphael_CDMA_Relocker folder to RAPHIMG.nbh--just like when you re-name when flashing roms via sd.---put that file on root of card. then I put SSPL-Manual_RAPHAEL on phone main memory and ran the file, as per earlier instructions in first post

[puff]

Originally Posted by LoWw

A little confused with the unlockers? What is the difference between .25 and .37 beside the splash screen problems? What does MFG stand for and what can it do for me? I just want to unlock the phone and flash custom roms!!! I have flashed before flashing my Vogue!!

the MFG is the difference.
do u use MTTY? if not (or you dont know what i'm talkin about) dont worry about it, u dont need it
in otherwords, just use the .37

hope that helps...