PPCGeeks
Page 19 of 87 « First 91718 19 20212969 Last »
Show 40 post(s) from this thread on one page

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   Android On TP2 (http://forum.ppcgeeks.com/forumdisplay.php?f=179)
-   -   [CAB] GSM&CDMA Project Android Port and Startup Utility [01/23] FRX04 Reference! (http://forum.ppcgeeks.com/showthread.php?t=114400)

InvincibleLiving 07-18-2010 07:40 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [7/16] NEW FROYO BUILD V3
 
Quote:
Originally Posted by HTCotta (Post 1872500)
Awesome to hear about the linux guys joining the team with some dedication, I would love to see this project go vogue level against all odds.

A question: So all i have to do to upgrade to the newest froyo build from the beta is run the auto update from the MJGDroidUtility?
Auto update has worked for some, but I had no luck with it. It's possible that my issue had more to do with needing to lower the Overclock to 750000...

Give it a try and let us know how it goes for you.

HTCotta 07-18-2010 08:04 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [7/16] NEW FROYO BUILD V3
 
Ok, I'm not a TOTAL noob, I've read all the stickies and some of the more technical stuff but I'm MUCH more familiar with the WM side of things...how can I confirm I've been upgraded? I didn't take note of my build number or anything before running the auto update.

cody_cummins 07-18-2010 08:38 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [7/16] NEW FROYO BUILD V3
 
I tried the update utility in the regular unoverclocked version of froyo and after I update, i launch android, it gets to the unlock screen and freezes and reboots, dunno whats going on

stcardinal 07-18-2010 09:18 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [7/16] NEW FROYO BUILD V3
 
I'll be the kill joy here and say "pipedreams." Never gonna happen. His "friend" will lose interest after a day and then drop the project. Sound development, back to square one.

>:P

Reefermattness 07-18-2010 10:05 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [7/16] NEW FROYO BUILD V3
 
Quote:
Originally Posted by HTCotta (Post 1872500)
Awesome to hear about the linux guys joining the team with some dedication, I would love to see this project go vogue level against all odds.

A question: So all i have to do to upgrade to the newest froyo build from the beta is run the auto update from the MJGDroidUtility?
No, but we will actually try to incorporate a system update tool on the next big update to the startup utility. The system.ext2 is the only real major file you need to replace in order to upgrade your OS version, so you can download a rar and just replace it in the andboot folder on your sd card. Usually also requires a delete of the data.img.

pdawg17 07-19-2010 02:15 AM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [7/18] FROYO RC1 w/ APN.x
 
Yo Reefer-

I just noticed you added an RC1 Froyo to your download page...is this the same as what you posted a few days ago or does this include more tweaks?

proxhack 07-19-2010 02:24 AM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [7/18] FROYO RC1 w/ APN.x
 
I noticed the same thing but the cab or rar file still says 16...Are you uploading tonight?

Reefermattness 07-19-2010 02:24 AM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [7/18] FROYO RC1 w/ APN.x
 
Quote:
Originally Posted by pdawg17 (Post 1873038)
Yo Reefer-

I just noticed you added an RC1 Froyo to your download page...is this the same as what you posted a few days ago or does this include more tweaks?
You probably have the same one, I just didn't know it was actually called RC1, I thought it was beta build 3. :P It actually does have a couple things tweaked, and I added a custom XDAndroid boot animation to the BLAZN version today but if you have the version from when i changed the download page and added the 2 diff versions then you have almost the exact same 1.


Quote:
Originally Posted by proxhack (Post 1873041)
I noticed the same thing but the cab or rar file still says 16...Are you uploading tonight?
I didnt change the date because i didnt want to have to change the download links, but i did actually make changes today. You guys watch me like a hawk. :P

That google page is really easy but the links for downloads they have are a bit weird and a pain to set up, ill probably change that up here pretty soon too its a little annoying and i dont like that it says "view". :)

proxhack 07-19-2010 02:29 AM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [7/18] FROYO RC1 w/ APN.x
 
Quote:
Originally Posted by Reefermattness (Post 1873042)
You probably have the same one, I just didn't know it was actually called RC1, I thought it was beta build 3. :P It actually does have a couple things tweaked, and I added a custom XDAndroid boot animation to the BLAZN version today but if you have the version from when i changed the download page and added the 2 diff versions then you have almost the exact same 1.




I didnt change the date because i didnt want to have to change the download links, but i did actually make changes today. You guys watch me like a hawk. :P

That google page is really easy but the links for downloads they have are a bit weird and a pain to set up, ill probably change that up here pretty soon too its a little annoying and i dont like that it says "view". :)
We keep an eye on you...did you noticed the camera mounted on your ceiling?

proxhack 07-19-2010 02:31 AM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [7/18] FROYO RC1 w/ APN.x
 
If I use the update tool, do I get the changes that you just mentioned or should I just start from scratch?

Reefermattness 07-19-2010 02:32 AM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [7/18] FROYO RC1 w/ APN.x
 
Quote:
Originally Posted by proxhack (Post 1873045)
We keep an eye on you...did you noticed the camera mounted on your ceiling?
I thought that blinking red light was just part of my tivo :( You sick sick SoBs.


Quote:
Originally Posted by proxhack (Post 1873049)
If I use the update tool, do I get the changes that you just mentioned or should I just start from scratch?
No all of the changes were system changes. Download the rar, open it, take out old system.ext2 replace old one inside of "andboot" then launch Android. At the worst, If it still does weird things, then get back into windows, delete your data.img from the same folder, and you'll be fine after that.

proxhack 07-19-2010 02:36 AM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [7/18] FROYO RC1 w/ APN.x
 
Thanks again!

I will turn off the wireless camera now so you can do your thing...No one is watching now.

Reefermattness 07-19-2010 02:55 AM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [7/18] FROYO RC1 w/ APN.x
 
Quote:
Originally Posted by proxhack (Post 1873055)
Thanks again!

I will turn off the wireless camera now so you can do your thing...No one is watching now.

I just thought that meant that Cougar Town was recording.

proxhack 07-19-2010 03:03 AM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [7/18] FROYO RC1 w/ APN.x
 
Quote:
Originally Posted by Reefermattness (Post 1873069)
I just thought that meant that Cougar Town was recording.
Cougar town...Nope, at least Pretty Wild!

wizardhead 07-19-2010 08:50 AM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [7/18] FROYO RC1 w/ APN.x
 
Whats the progress on the sound?

Reefermattness 07-19-2010 12:31 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [7/18] FROYO RC1 w/ APN.x
 
Quote:
Originally Posted by wizardhead (Post 1873179)
Whats the progress on the sound?

From Post#1:

Quote:
NOT WORKING IN THIS BUILD:
  • BT
  • Sound (in call mic and earpiece work, no ringtones or music)
  • Camera
  • Opengles: using software rendering for the time being.
  • Battery Meter
Don't worry, we are not keeping secrets, if anything changes, you'll know the same time everyone else does.

imdashiznit 07-19-2010 12:31 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [7/18] FROYO RC1 w/ APN.x
 
Hi Everyone, i was looking through the FAQ and this forum but i was not able to find a solution to this issue i have been having!

I have a Sprint TP2 with MightyRom installed and the newest FROYO RC1 installed. What i have seen consistently is that the first time i load and run Android it works fine. I get data and phone both working the first time. However after i power down Android to load WM back up then try to load Android again, i get neither data or phone working!

Here are things i have tried to fix this issue:
1. make sure "force cmda" is checked and also checked the startup file to see if it was set to 1.
2. set my phones WM settings to CDMA only, not "international"
3. tried restarting/reinstalling Android several times, but always the first time works but the next sessions will not work.

Any help would be great!

Thanks

stcardinal 07-19-2010 01:47 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [7/18] FROYO RC1 w/ APN.x
 
I don't have that problem with my Sprint TP2. I did notice that in the 2nd boot, it takes it a bit longer to pick up a signal/data.

YnYng 07-19-2010 01:56 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [7/18] FROYO RC1 w/ APN.x
 
hey reefer: do u rmbr what u did in the first blazin build that got rid of the notification light being on all the time? It annoys me to no end. The new blazn version has the leds enabled though. I've tried led effects but it doesnt seem to do anything

Ryum 07-19-2010 03:27 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [7/18] FROYO RC1 w/ APN.x
 
I did a soft reset and everything is not working again. Getting the net error when I try to open project android icon, and get a later version installed, must uninstall that before I can uninstall the net.cab that is new to the download page.

I then deleted the .cab and data.img off the SD card DLed the new cab, installed that and all I am getting when I boot up is some animation that scrolls through some phones and junk that doesn't stop looping.

I guess this is like my old computer, I turned everything off again and started from scratch and now it's working.

getting apps and ect back and will see how it goes

kidwolf908 07-19-2010 03:28 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [7/18] FROYO RC1 w/ APN.x
 
Quote:
Originally Posted by YnYng (Post 1873604)
hey reefer: do u rmbr what u did in the first blazin build that got rid of the notification light being on all the time? It annoys me to no end. The new blazn version has the leds enabled though. I've tried led effects but it doesnt seem to do anything
I would like to know this too. I would rather not know whether my phone is asleep or not than drain the battery and kill my notification light by having it on 24/7. The phone sleeps properly for the most part anyway under Android. Just disable it already lol

Reefermattness 07-19-2010 03:36 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [7/18] FROYO RC1 w/ APN.x
 
Quote:
Originally Posted by kidwolf908 (Post 1873781)
I would like to know this too. I would rather not know whether my phone is asleep or not than drain the battery and kill my notification light by having it on 24/7. The phone sleeps properly for the most part anyway under Android. Just disable it already lol

Using LED effects you can get it to turn off by messing with the settings a bit. Just for those worried about their LED burning out(not to mention the insignificant power a LED bulb uses) the low end LED bulb has about 50,000 hours of use before it will burn out, that would mean you would have to leave your handset LED on for 2083 days straight before it did. Of course there is always that one random instance when it goes out early, so i do understand. I would rather have LED notifications personally. :joker:

RonaldReagan 07-19-2010 04:32 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [7/18] FROYO RC1 w/ APN.x
 
Quote:
Originally Posted by imdashiznit (Post 1873455)
Hi Everyone, i was looking through the FAQ and this forum but i was not able to find a solution to this issue i have been having!

I have a Sprint TP2 with MightyRom installed and the newest FROYO RC1 installed. What i have seen consistently is that the first time i load and run Android it works fine. I get data and phone both working the first time. However after i power down Android to load WM back up then try to load Android again, i get neither data or phone working!

Here are things i have tried to fix this issue:
1. make sure "force cmda" is checked and also checked the startup file to see if it was set to 1.
2. set my phones WM settings to CDMA only, not "international"
3. tried restarting/reinstalling Android several times, but always the first time works but the next sessions will not work.

Any help would be great!

Thanks
Did you take the sim card out of your phone?... I had no service until I did that. Now it works great in Andriod.....

revaaron 07-19-2010 04:33 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [7/18] FROYO RC1 w/ APN.x
 
Quote:
Originally Posted by RonaldReagan (Post 1873872)
Did you take the sim card out of your phone?... I had no service until I did that. Now it works great in Andriod.....
I had the same issue and that same solution. works sometimes. not others.

Ryum 07-19-2010 04:36 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [7/18] FROYO RC1 w/ APN.x
 
Quote:
Originally Posted by Reefermattness (Post 1873793)
Using LED effects you can get it to turn off by messing with the settings a bit. Just for those worried about their LED burning out(not to mention the insignificant power a LED bulb uses) the low end LED bulb has about 50,000 hours of use before it will burn out, that would mean you would have to leave your handset LED on for 2083 days straight before it did. Of course there is always that one random instance when it goes out early, so i do understand. I would rather have LED notifications personally. :joker:
I like the LED notification, but my light just stays on since I installed the latest build. How do you have your's set so that it just comes on when you have a notification like missed call, or unread text?

filledtwinkie 07-19-2010 05:02 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [7/18] FROYO RC1 w/ APN.x
 
ok...

so is mms working or not?

its not under the not working section, so im confused.

Amelios 07-19-2010 05:08 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [7/18] FROYO RC1 w/ APN.x
 
Is there some trick to getting GPS fully working in the latest builds? It was previously working just fine for me in the 2.1 builds. When I updated to the latest Froyo build, Google Maps always placed me just off the coast Africa. I remember this sort of behavior from earlier 2.1 builds, but it started working properly at some time. Froyo seems to have taken me a step backwards, unless I'm missing something obvious.

cali_rail 07-19-2010 06:36 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [7/18] FROYO RC1 w/ APN.x
 
I can't get Wi Fi to connect but I read somewhere that there were issues with wep connections still. Other than that it's great!

cali_rail 07-19-2010 06:51 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [7/18] FROYO RC1 w/ APN.x
 
I take that back.... I can't add facebook to the manage accounts. it gives me the option but it doesn't do it when i click on it to add.

2phonejones 07-19-2010 07:54 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [7/18] FROYO RC1 w/ APN.x
 
i need the blazin start up text, i keep getting a error so i think its corrupt, thanks.

Reefermattness 07-19-2010 08:25 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [7/18] FROYO RC1 w/ APN.x
 
Quote:
Originally Posted by Amelios (Post 1873957)
Is there some trick to getting GPS fully working in the latest builds? It was previously working just fine for me in the 2.1 builds. When I updated to the latest Froyo build, Google Maps always placed me just off the coast Africa. I remember this sort of behavior from earlier 2.1 builds, but it started working properly at some time. Froyo seems to have taken me a step backwards, unless I'm missing something obvious.
The trick is Patience. Its also a virtue. :P

It has not gotten a full lock on you yet, keep the screen on for 5-10 minutes and it will find you and be very accurate, and take about 10 sec per lock after that.




Quote:
Originally Posted by Ryum (Post 1873884)
I like the LED notification, but my light just stays on since I installed the latest build. How do you have your's set so that it just comes on when you have a notification like missed call, or unread text?

You cant yet. :(



Quote:
Originally Posted by 2phonejones (Post 1874211)
i need the blazin start up text, i keep getting a error so i think its corrupt, thanks.

Code:
set ramsize 0x10000000
set ramaddr 0x10000000
set mtype 2292
set KERNEL zImage
set initrd initrd.gz
 
set cmdline "lcd.density=240 msmts_calib=0x9f.0x39a.0x35c.0x78  7x00.a11=500 msmvkeyb_toggle=off pmem.extra=1 gsensor_axis=2,1,3  pm.sleep_mode=2 rel_path=andboot hw3d.force=0 htc_battery_smem.fake=0  acpuclock.oc_freq_khz=716800 physkeyboard=tilt2 htc_hw.force_cdma=0 "
 
Boot

2phonejones 07-19-2010 10:02 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [7/18] FROYO RC1 w/ APN.x
 
arrghh i keep getting a mjdroid start up utility error when i try to load android???? any sugest?

proxhack 07-19-2010 10:07 PM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [7/18] FROYO RC1 w/ APN.x
 
Quote:
Originally Posted by 2phonejones (Post 1874372)
arrghh i keep getting a mjdroid start up utility error when i try to load android???? any sugest?
Copy and paste startup from andboot to the root of the sd card, I believe currently startup will be 0 bt.

Reefermattness 07-20-2010 02:00 AM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [7/18] FROYO RC1 w/ APN.x
 
leave the messed up 0kb one there in the startup folder, name the second one default.txt and when that screen comes up asking for it just click "run" and it will bypass the startup, and run the default.txt instead. :)

InvincibleLiving 07-20-2010 02:21 AM
Wirelessly posted (Mozilla/5.0 (Linux; U; Android 2.2; en-us; MSM Build/MASTER) AppleWebKit/533.1 (KHTML, like Gecko) Version/4.0 Mobile Safari/533.1)

This is a bit off topic but what's up with video playback? anything out there for tp2 users yet?

Mind you I'm not even referring to flash 10.1, but I'll take that too if its out there.

Sorry for the hijack...

Ryum 07-20-2010 02:26 AM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [7/18] FROYO RC1 w/ APN.x
 
If notifications don't work with the LED light, what is the issue or the pros and cons with keeping it turned off vs always on?

Reefermattness 07-20-2010 02:47 AM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [7/18] FROYO RC1 w/ APN.x
 
Quote:
Originally Posted by Ryum (Post 1874677)
If notifications don't work with the LED light, what is the issue or the pros and cons with keeping it turned off vs always on?
There is really no reason for regular users to have it, its actually set up still for when we were debugging sleep mode. Green - sleep Orange - wake so you can disable it with led effects if you would like to.

InvincibleLiving 07-20-2010 02:50 AM
Wirelessly posted (Mozilla/5.0 (Linux; U; Android 2.2; en-us; MSM Build/MASTER) AppleWebKit/533.1 (KHTML, like Gecko) Version/4.0 Mobile Safari/533.1)

Quote:
Originally Posted by Ryum
If notifications don't work with the LED light, what is the issue or the pros and cons with keeping it turned off vs always on?
Basically the battery drain is negligible so there's little to worry about. Its purely about preference.

domoarigato 07-20-2010 09:59 AM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [7/18] FROYO RC1 w/ APN.x
 
does it have to be installed on a clean SD card? i have a lot of photos i dont want to get rid of

StarLite 07-20-2010 10:17 AM
Re: [CAB] GSM&CDMA Project Android Port and Startup Utility [7/18] FROYO RC1 w/ APN.x
 
Quote:
Originally Posted by domoarigato (Post 1874895)
does it have to be installed on a clean SD card? i have a lot of photos i dont want to get rid of
No it doesn't have to be empty. Android does not touch your other files, but no-one can guarantee that android won't nuke your files due to some weird bug, so if you don't want to lose anything, make a backup!


All times are GMT -4. The time now is 01:33 PM.
Page 19 of 87 « First 91718 19 20212969 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® ©2000 - 2025, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0