[BUILD] **Complete FroYo Bundle** FRX07.1 - Maintenance Release

[fishingmedic]

Originally Posted by thecensor

The camera on my sprint TP2 doesn't work under FRX07.1 but does work under winmo. Whenever I press the camera icon in Android, the phone reboots.

I reformatted the the SDcard and installed FRX07.1_Full_Bundle_20110901.zip, but the problem persists.

Thanks

Which kernel are you using? That was so long ago, I don't remember if the stock kernel had problems with the camera or not, but IIRC it worked fine.

[thecensor]

Originally Posted by fishingmedic

Which kernel are you using? That was so long ago, I don't remember if the stock kernel had problems with the camera or not, but IIRC it worked fine.

Kernel version 2.6.27.46-01356-gd4c73bd

[arrrghhh]

Originally Posted by thecensor

The camera on my sprint TP2 doesn't work under FRX07.1 but does work under winmo. Whenever I press the camera icon in Android, the phone reboots.

I reformatted the the SDcard and installed FRX07.1_Full_Bundle_20110901.zip, but the problem persists.

Thanks

You verified you have a RHOD400? Cam has worked "fine" (fine being relative, it certainly hasn't caused reboots) on that phone for a very long time.

[thecensor]

Originally Posted by arrrghhh

You verified you have a RHOD400? Cam has worked "fine" (fine being relative, it certainly hasn't caused reboots) on that phone for a very long time.

Yes, it's a Sprint phone activated under Boost. It also says Rhod400 on the sticker inside.

[arrrghhh]

Originally Posted by thecensor

Yes, it's a Sprint phone activated under Boost. It also says Rhod400 on the sticker inside.

How did you reformat the card? Have you tried a different SD card? I haven't heard of this before. Even the RHOD100 folk, the camera would not work - but it wouldn't cause a kernel panic/reboot.

[thecensor]

Originally Posted by arrrghhh

How did you reformat the card? Have you tried a different SD card? I haven't heard of this before. Even the RHOD100 folk, the camera would not work - but it wouldn't cause a kernel panic/reboot.

I used the HP tool to format. Haven't tried a different card. My card is a Sandisk Mobil Ultra class 6 16Gb.

Also, I don't know if it's related, but when I do a power off on the FRX, it reboots insated of shutting down. that doesn't happen on the winmo.

[Sc/ant864]

Originally Posted by thecensor

Thanks for you help. Here's the latest:

I bought 2 sandisks (2gb and 4gb class 2) from reputable Amazon marketplace sellers ( Media-Mart and Straight Trading, Inc.)

Then installed FRX on the first one:

power on the phone was more than 70% charched.

Connected the phone with the card to the computer as a disk drive
I did a slow FAT32 format with the HP tool

copied the frx07.1 files (using tera copy which checks the CRC to make sure everything copied correctly) I put the correct start up on the root directory (RHOD400) and the also calibrate.ts file.

Everythig went went ok, got the flying green droids, then the Froyo desktop, but with a alert saying:
"sorry the procees com android. phone has stopped unexpectedly. please try again. Force close"

I click the 'force close' then did a shut down (which actually shut down, not rebooted), waited a minute, restarted, click 'Android' on GenY, it booted
but got stuck with the last line saying:

"2.67827] allocated dma buffer at ffc0b000, dma_addr 24 26e000"

for maybe 20 mintues then the screen went completely blank and could only be revived by reinserting the battery.


Third boot, went fine, but the when activating the camera it rebooted the phone like before.

Next I tried the second card. The first boot didn't get stuck, but I did get the 'force close' message and the camera still caused a reboot.


I tried GBX, but that was a complete failure, the screen would hardy respond.

Maybe I'll try NAND next just to see how it does albeit it's missing features that I want.

Any suggest would be appreciated.

Danny

In FRX did you update? In GBX did you copy CSV files from WM?

Sent from my ppcT7380 Ti/GBX0B via PPCG app

[thecensor]

Originally Posted by Sc/ant864

In FRX did you update? In GBX did you copy CSV files from WM?

Sent from my ppcT7380 Ti/GBX0B via PPCG app

I didn't update FRX because I used the latest version, Is there a way to verify I'm using the latest without going thought the update? I did copy the CSVs to GBX

I also installed the older version of GBX (GBX0A_Full_Bundle_11.3.2011.zip) and that also has the same problem with the camera!

I just reinstalled the latest GBX (GBX0B_Full_Bundle_2011.12.30) I copied the csv files and this time it works good except for the camera which reboots the phone.

[arrrghhh]

Originally Posted by thecensor

I didn't update FRX because I used the latest version, Is there a way to verify I'm using the latest without going thought the update? I did copy the CSVs to GBX

I also installed the older version of GBX (GBX0A_Full_Bundle_11.3.2011.zip) and that also has the same problem with the camera!

I just reinstalled the latest GBX (GBX0B_Full_Bundle_2011.12.30) I copied the csv files and this time it works good except for the camera which reboots the phone.

Logs/getprop will verify what version you're on.

GBX0A is ancient, over a year old. FRX should work fine, perhaps you've done something with your camera? I don't know. I don't think I've seen any logs from your reboots after using cam however.

[thecensor]

Originally Posted by arrrghhh

Logs/getprop will verify what version you're on.

GBX0A is ancient, over a year old. FRX should work fine, perhaps you've done something with your camera? I don't know. I don't think I've seen any logs from your reboots after using cam however.

Camera works fine under WinMo. How do I get logs from my phone?

Another interesting question is why do I keep getting the message:
"sorry the procees com android. phone has stopped unexpectedly. please try again. Force close"
after the first boot...