PPCGeeks - [BUILD] **Complete FroYo Bundle** FRX07.1

PPCGeeks (http://forum.ppcgeeks.com/index.php)

- Android On TP2 Development (http://forum.ppcgeeks.com/forumdisplay.php?f=319)

- - [BUILD] **Complete FroYo Bundle** FRX07.1 - Maintenance Release (http://forum.ppcgeeks.com/showthread.php?t=145756)

[BUILD] **Complete FroYo Bundle** FRX07.1 - Maintenance Release

FRX07.1 is here!!

This is a maintenance release - basically taking the newest components to make a completely up-to-date (as of Sept. 1).

Quite a lot has changed since FRX06 - the install process hasn't really, but be sure to read the changelog in the next post and the caveats in post #3!

<<<This is a link to the... FAQ Click it!!>>>

I have created a complete bundle of FroYo with a stable kernel from GIT ( August 19 / 1348 ), and rootfs from GIT (Sept. 2).

Please, feel free to DONATE to the XDAndroid project!

Every little bit helps!

Directions:

1. Download the full bundle (zip). (Updated September 1 2011)

If instead you just want the system.ext2 (zip) (Updated July 15 2011) file by itself... Don't download this if you're not sure! Grab the full bundle!

2. Extract it. You’ll see a folder, FRX07.1, copy its contents to the root of your SD card. If you want to run Android from a folder instead of all the files on the root of the card, follow the steps below.

3. Go into the STARTUPS folder. Grab the appropriate startup.txt for your device (if you don't know what device you have, you should read the FAQ), and move it to the root of the card (or where you run haret.exe from. If you want to change the location of the build, put a rel_path= statement in the cmdline section of the startup.txt. Mine is located two folders deep on the SD, so my rel_path=Androids/TP2Ref)

4. Screen calibration - you have three choices:

Re-use an old ts-calibration file if you have it and you know it's good.
Download the ts-calibration.zip file and extract it to where you put the rest of the files (root of SD or in a folder - make sure it all stays together!)
Manually calibrate - boot with no ts-calibration file and watch the boot process - you'll be asked to hit 5 points to calibrate the screen. If you have issues calibrating, try an older kernel (1225 works well) Once you have the calibration file hold on to it (make 15 copies if it's a good one :p), reboot & go back to the newest kernel!

6. Run haret.exe.. Profit! :D

Let it settle out on the first boot. Many have reported they had to reboot basically because it was so slow - if you let it sit for about 10 mins so the media scanner can go thru everything, etc. it will be much more pleasurable experience. If you want adb in and watch the processes via top, you'll see why the phone seems so slow - there's lots of background processes cranking because this is the first boot ;).

Troubleshooting:
Please read the... FAQ
If you have any issues with the kernel, feel free to change it:
There are some devices that are having issues with the newest kernels. Please see the kernel autobuild service to get archived kernels. Once you download a replacement kernel, go to where you run haret.exe from - remove your old zImage/modules-xxxxx.tar.gz. Take the new zImage/modules-xxxxx.tar.gz and replace the old ones, same folder - where you run haret.exe from. Make sure the ‘zImage’ is named just that. Do not rename the modules file, do not extract it - should be in .tar.gz format.

See Incremental Updates for more information on updating the kernel and other components.

Random issues can often be solved by forcing the system to create a new data.img. If you're worried about losing data (all user data is stored in the data.img!!), Titanium Backup works quite well. If you wish, you can rename the data.img to something else, and let the system create a new one - just to see if it resolves your problem.

Similarly, if you wish try formatting your SD card - I prefer to use the HP Tool - do a full format, FAT32.

Even though this build is considered fairly stable, you are more than likely going to run into issues. The next post will address issues particular to this build - PLEASE READ THESE before asking questions! Feel free to post questions in this thread, I will do my best to address them. Big thanks to stinebd for releasing the system image, and of course the other developers for their hard work on making these kernels available.

Re: [BUILD] **Complete FroYo Bundle** FRX07!!

stinebd's Changelog:

Quote:

Originally Posted by stinebd

Here’s a new release for you, folks. This is a major release with a ton of changes, new features, and fixes. Our friend hyc/highlandsun did most of the heavy lifting for this release. Highlights include a rewritten RIL with support for world phones and greatly improved CDMA support; fixes for the media codecs; fixes for MMS on Sprint; increased security with the Superuser app.

A list of changes is included below. The FRX07 system image is available for download now, and will require the use of a new rootfs image, also available now. Additionally, we have a new bundle containing everything needed to enjoy a full FRX07 system.

Note: Due to the incredibly long list of changes, this is a somewhat condensed, terse changelog describing only the overall scope of the changes.

FRX07:

frameworks/base:
- Major frameworks changes for CDMA/GSM dual-mode worldphone support. (hyc)
- Fixes for data connection handling to improve startup time. (hyc)
- Fixes for wifi handling to avoid issues on hanged drivers. (hyc)
- Stagefreight (media codecs) fixes. (hyc/viruscrazy)
- Fixes for Sprint’s wonky MMS markup structure. (hyc)
- Fix MediaScanner not finding audio files (including ringtones) in system.ext2
hardware/libhardware_legacy:
- Minor GPS driver fixes. (Alex[sp3dev])
- Rename wifi interfaces to wlan0 on all devices (hyc)
hardware/xdandroid-ril: Major RIL refactoring for improved performance on all devices, and added CDMA/GSM dual-mode worldphone support. (hyc)
packages/apps/Gallery3D: Switched back to Gallery3D as the gallery app (closes bug #111)
packages/apps/Mms: Fixes for Sprint’s wonky MMS markup structure. (hyc)
packages/apps/Phone: Fixes for CDMA/GSM dual-mode worldphone support. (hyc)
packages/apps/Superuser: Added the Superuser package for authorizing su privileges. This, along with our signed builds, provides greatly increased security for the end user (mostly against malicious apps from the Market).
system/extras/su: Added as a dependency for the Superuser package
vendor/qcom/android-open: Include missing stagefright codec symbols. (hyc/viruscrazy)

To coincide with the FRX07 system image, the following rootfs changes have been made:

init.froyo.rc modifications...
- Adjust wpa_supplicant service for the new abstraction provided by libhardware_legacy, as well as interface rename
- Abstract the hciattach service to provide bluetooth support on both chipsets
Rename wifi interface to wlan0 on all devices
apns-conf.xml updated
keymaps completely reorganized, and RHOD end-call key has been remapped to be the Home key in Android.
default.prop: set ro.secure=1 to lock down the adb shell - su can be used with the Superuser app to authorize root access in adb if needed.

Re: [BUILD] **Complete FroYo Bundle** FRX07!!

Layman's Changelog

(As in, the changelog I wrote :p)

FRX07.1 Changelog:

RHOD - all buttons on the front no longer wake the device. Only the power button wakes the device now.
Updated to the newest RIL
hyc's modified libs for video now baked in - *most* HQ YouTube videos (and other HQ videos) should finally work!
RHOD & TOPA - Userland (Android) now controls the LED by default now. If you need to debug sleep, you will have to change the behavior manually. See Detule's post on this topic.
Facebook sync should now work, out-of-box.

FRX07 Changelog:

Updated RIL (thanks hyc!) - this covers many different bugs that were in the old RIL - I'm only going to cover the major ones...
- CDMA now works correctly (for the most part). force_cdma (and north_am_dialing) is now deprecated (not needed/ignored!)
- You can boot with a SIM in on a CDMA device and choose your GSM or CDMA on the fly under Settings.
- Location based on towers now works on CDMA.
- 1xRTT now displays correctly, but I never seem to get EVDO Rev.a... I always get 0. This is represented by a 3g icon, as this is what the Android framework provides.
- Full MMS support! Please see this page for configuration instructions. Will need help fleshing out the list of carriers folks!
- Spotty service, switching towers, etc should no longer cause the dreaded SoD (Sleep of Death) condition!
(Basic audio) 3.5mm support for RHOD400/500
Droidwall works out of the box now
Keyboard backlight now fades in/out
Gallery3D back in! Picasa Web Sync comes with it ;)
A couple new apps added to AndroidApps folder:
- rpierce99's app GetLogs
- Titanium Backup

Re: [BUILD] **Complete FroYo Bundle** FRX07!!

Caveats:

BT - works now! But audio doesn't route. See this thread if you're feeling adventurous and want to play with/don't mind using some unstable/incomplete code...
WEP on wifi doesn't work. I heard an app called 'wifi-ace' (on the Market) fixes WEP!

Re: [BUILD] **Complete FroYo Bundle** FRX07!!

Thanks a lot! I am trying it out right now. You guys are awesome!

Re: [BUILD] **Complete FroYo Bundle** FRX07!!

arrrghhh, the link for the MMS config page in the above post is not working.

Re: [BUILD] **Complete FroYo Bundle** FRX07!!

Quote:

Originally Posted by djxtreme504 (Post 2128556)

arrrghhh, the link for the MMS config page in the above post is not working.

lol, yea I need to build it.

I have info for Sprint at least... Other carriers will need to get filled in!

Edit - linky updated! I have Sprint in there, and partially Verizon... will need more help filling it in guys! It is a wiki ;).

Re: [BUILD] **Complete FroYo Bundle** FRX07!!

fresh format, reboots randomly, either at boot or after a few minutes of use. deleted data.img to no avail. phone force closes @ first boot. rhod500

Re: [BUILD] **Complete FroYo Bundle** FRX07!!

Just finished Dling it, waiting on the green robots to finish their dance.

BTW major props to all the devs who worked on this and the hard working slobs who put it all together.

One question though was scbs ( battery reading from jonpry) added to this?

EDIT := i think u have the MCC and NMC switched when i tired to put it the way you have it , android gives an eror that MCC must be 3 digits so switched them around also i think u also have to add #777 for the APN ( im sure u already did that but its for newbs like me who might not remember / know about it)

Carrier-specific Settings

Carrier MNC MCC MMSC
Sprint 310 00 http://mms.sprintpcs.com/servlets/mms

Re: [BUILD] **Complete FroYo Bundle** FRX07!!

thanks arrrghhh, i want try this Froyo ... :)