PPCGeeks

PPCGeeks (http://forum.ppcgeeks.com/index.php)
-   Android On TP2 Development (http://forum.ppcgeeks.com/forumdisplay.php?f=319)
-   -   [BUILD] **Complete FroYo Bundle** FRX07.1 - Maintenance Release (http://forum.ppcgeeks.com/showthread.php?t=145756)

parthew 07-16-2011 09:35 PM

Re: [BUILD] **Complete FroYo Bundle** FRX07!!
 
Quote:

Originally Posted by oisact (Post 2128653)
For what it's worth, I did a completely fresh install on my (now unused) TP2. Created a new Google account, installed Opera then plugged it in to charge all night. This morning I found it had rebooted back into WM. No CDMA service - Wifi only, although the cellular radio was left on.

While I've been typing my TP2 has been booting back into Android. When it came up, I unlocked it and set it down, and it rebooted a minute or two later. So there is something very unstable with this. Hopefully it's a minor config tweak or something.

My phone was in Airplane mode in WM prior to booting. I'm enabling the radio before booting into Android in case that has anything to do with it.

I am having a similar problem, whenever I hang up theres no service and randomly after sending or receiving texts the service cuts out.
It turns back on once I put phone in airplane mode and then turn off airplane mode.

Alcoherent 07-16-2011 09:35 PM

Re: [BUILD] **Complete FroYo Bundle** FRX07!!
 
How long does it take for haret.exe to install? I left it running and it's still going after about 3 hours! Still working because the text is scrolling and the numbers in the first bracket are increasing, but it says "[16282.702941] [<c0072a90>]..."

I formatted my SD, copied frxo7 to the SD, copied the startup file for my RHOD400 into root, and then ran harot.exe.

Any thoughts on why it's taking so long?

arrrghhh 07-16-2011 09:48 PM

Re: [BUILD] **Complete FroYo Bundle** FRX07!!
 
Quote:

Originally Posted by jerryyyyy (Post 2128780)
PS just got a new car which has great iPhone or Android interfaces... looks like soon the old TP2 is going soon....

Why can't you use your TP2 in Android with your car...? I bet it works ;).

Quote:

Originally Posted by Alcoherent (Post 2128822)
How long does it take for haret.exe to install? I left it running and it's still going after about 3 hours! Still working because the text is scrolling and the numbers in the first bracket are increasing, but it says "[16282.702941] [<c0072a90>]..."

I formatted my SD, copied frxo7 to the SD, copied the startup file for my RHOD400 into root, and then ran harot.exe.

Any thoughts on why it's taking so long?

Did you do the calibration/ts-calibration part...?

Alcoherent 07-16-2011 10:04 PM

Re: [BUILD] **Complete FroYo Bundle** FRX07!!
 
I was waiting to do it manually but it never prompted me for it.

Should I just stop it and use the ts-calibration.zip file or wait for the install to finish?

aristowong 07-16-2011 10:50 PM

Re: [BUILD] **Complete FroYo Bundle** FRX07!!
 
Quote:

Originally Posted by rpierce99 (Post 2128818)
After you disable GPS it will start sleeping properly (and turn the LED green), see the FAQ for info on GPS and sleep. The LED indicates sleep status to warn you if your phone is going to drain fast due to not sleeping properly.

ah ok. works now. just wondering if the drain is significant with the constant LED on. kinda annoying with my ADD, but would be worth it for android...

albumleaf 07-16-2011 11:53 PM

Re: [BUILD] **Complete FroYo Bundle** FRX07!!
 
Awesome -- thanks so much everyone! Will report my results soon.

edit: Been running overnight and this morning, no issues whatsoever. Audio with the 3.5mm jack works excellent, there is nothing more I could possibly ask for, THANKS AGAIN!

edit: I still have one weird thing where media/notification/call volume is stuck at zero until I make a call and hang up, but I reboot so seldom these days that it's not a huge deal.

fortunzfavor 07-17-2011 12:26 AM

Re: [BUILD] **Complete FroYo Bundle** FRX07!!
 
Quote:

Originally Posted by aristowong (Post 2128834)
ah ok. works now. just wondering if the drain is significant with the constant LED on. kinda annoying with my ADD, but would be worth it for android...

I read a lot at night w/ my TP2, so I finally relented and covered the led with electrical tape. It's going to be a PITA to clean the residue off once things are normal, but I'm due a new screen protector anyway and that's where most of the contact is.

I can still see the light well enough to know if it is sleeping properly, but it doesn't glare in my eyes, so I consider it worth it. Your ADD might not be as assuaged, just thought I'd mention it.

aristowong 07-17-2011 12:27 AM

Re: [BUILD] **Complete FroYo Bundle** FRX07!!
 
i lose service when i get a sms. anyone else have this issue?

tkedch 07-17-2011 01:31 AM

Re: [BUILD] **Complete FroYo Bundle** FRX07!!
 
ARRRGH,
Thank you very much for the update. After some preliminary tests, (still with the old data.img), I found that whenever I turn on wifi, it still shows error. I just want someone who started out with a brand new data.img to confirm that it does work because everything else works include 3.5mm and BT. Overall, this is a very solid build with faster graphics.

Thanks again!

teradog 07-17-2011 02:13 AM

Re: [BUILD] **Complete FroYo Bundle** FRX07!!
 
Wahoo... March, April, May, June, July... finally :>)) NICE! thanks/d


All times are GMT -4. The time now is 05:44 PM.

Powered by vBulletin® ©2000 - 2021, Jelsoft Enterprises Ltd.
©2012 - PPCGeeks.com


Content Relevant URLs by vBSEO 3.6.0