NAND Testing - 05-25 Update: New LK, Recovery.img, Kernel Updates through Recovery

[MassStash]

Originally Posted by MassStash

getting calibration without visible points to touch aka the boxes. also, boot ani glitches out on screen with a "solid" animation, and video glitchs on the bottom half of the screen. sits here indefinately.... still waiting..... haha

update: loads to lockscreen, so far can't get screen to stay on??? strange

update2: got it working, but keeps turning screen off immediately... any ideas>?

[Lmiller1708]

Originally Posted by MassStash

update: loads to lockscreen, so far can't get screen to stay on??? strange

update2: got it working, but keeps turning screen off immediately... any ideas>?

What I did was keep hitting the end button, slowly... then go to settings, display and check auto backlight control. It works fine for me know.

[pts69666]

Hey, I have another question. Sorry for being such a pest. I went and looked at the 3D thread to see what was going on there, and I saw quite a few files there. More then just the one .so file I was using. Which of those files are needed for us and where do we put them? This is just my curiosity getting the best of me. I still have the flickering screen on my boot animation and such.

[liveordie56]

hmm, i have been trying this and i feel like i have everything right

tilt2.kb, rootfs.img, modules, and system.ext in an andboot folder in my storage card and then, the nbh in a folder with customRUU.exe. I flash and then it gets to the linux boot screen, after a couple lines go by, the screen fades out and dies and restarts. My battery says 100 percent when i flash back to windows

I have tried multiple module/nbh files and i have formatted my sdcard to fat32, no matter what i'm getting the same problem

anybody know what could be going wrong?

[mpannen]

I tried it out, i replaced the inits in the board-htcrhodium-panel.c with the new ones, but I am still having the same issues with the panel firing up.


What do these two entries do?

{0x6a17, 0x01},
{0x6a18, 0xff},

Here is exactly what I have for init:

nov_init_seq[] = {

/* EID es3 */
{0x5100, 0x00},
{0x1100, 0x01},
{REG_WAIT, 0x64},
{0x4e00, 0x00},
{0x180, 0x02},
{0x880, 0x00},
{0x2080, 0x33},
{0x2680, 0x78},
{0x2880, 0x3e},
{0x2980, 0x04},
{0x2c80, 0x22},
{0x2e80, 0x00},
{0xde80, 0x02},
{0x3a00, 0x55},
{0x3500, 0x00},
{0x4400, 0x00},
{0x4401, 0x00},
{0x5e00, 0x00},
{0x6a01, 0x00},
{0x6a02, 0x01},
{0x5301, 0x10},
{0x5500, 0x02},
{0x6a17, 0x01},
{0x6a18, 0xff},
{0x2900, 0x01},
{0x5300, 0x2c},
{0x5303, 0x01},
};

[mpannen]

I see there was an update to the repository, I will try this again with that update.

[mpannen]

Hmm not working for me, it seems that the screen hardly ever comes on, but the touch part of the screen still works. It fired up a few times but after that I couldn't even get a flicker.

[coolsilver]

Originally Posted by Lmiller1708

What I did was keep hitting the end button, slowly... then go to settings, display and check auto backlight control. It works fine for me know.

I agree it is more consistent with autobacklight setting on.

I think my backlight may soon burn out because it still from time to time have a red washed out look like a fluorescent bulb not getting enough power to turn the gas to plasma.

[natemcnutty]

Wirelessly posted (Opera/9.80 (Windows Mobile; Opera Mini/5.1.21594/22.401; U; en) Presto/2.5.25 Version/10.54)

Originally Posted by liveordie56

hmm, i have been trying this and i feel like i have everything right

tilt2.kb, rootfs.img, modules, and system.ext in an andboot folder in my storage card and then, the nbh in a folder with customRUU.exe. I flash and then it gets to the linux boot screen, after a couple lines go by, the screen fades out and dies and restarts. My battery says 100 percent when i flash back to windows

I have tried multiple module/nbh files and i have formatted my sdcard to fat32, no matter what i'm getting the same problem

anybody know what could be going wrong?

I will be working on a new rootfs in about an hour. I'll put the backlight on command at the start of init so the screen stays on during boot.

[tpdjr]

hey nate did you ever make the custom rootfs like f22 rootfs where the end key bring up recent apps and the helicoper veiw