WM 6.5 Kitchen QVGA and VGA Developer Edition

[Lmiller1708]

Originally Posted by sasa66

So far every thing is good on htc elf (with a lite rom ), stable, fast , no sleep issue However the magnifier icon in task bar in skreen shots linked few posts earlier is missing

Here is your fix!

[HKEY_LOCAL_MACHINE\SYSTEM\GWE\MAGNIFIER]
"Enable"=dword:1
"MagnifierConstant"=dword:c8
"BILINEAR"=dword:1

Most people have this turned off by default...

Have fun!

[sasa66]

Originally Posted by Lmiller1708

Here is your fix!

[HKEY_LOCAL_MACHINE\SYSTEM\GWE\MAGNIFIER]
"Enable"=dword:1
"MagnifierConstant"=dword:c8
"BILINEAR"=dword:1

Most people have this turned off by default...

Have fun!

Thank you for quick reply in fact i rarely use it but i was afraid that i missed something during cooking

[Firsttimer]

Is there a reg setting that will start Internet Sharing in the Connected mode when I launch Internet Sharing?

? my touch screen doesn't work so I need it to load and start at the same time.

[porom14]

Originally Posted by joojoobee666

PPCKitchen files for 23075 for the PPCK devs out there. These common files should work for ALL devices, including Apache . All other usual notes apply

UPDATE(10/22 12:35pm, EST): New common files for Apache users. Reported working. Thanks fort13 and Dennygun.

The XIP rar contains XIPs for the Apache, Herman, Kaiser, Titan, Victor and Vogue, all are spinlock patched except for the Apache. The Apache XIP is now LZX enabled (thx to Drellisdee) as well.


SYS_23075_Common
http://www.4shared.com/file/14269654...75_Common.html


SYS_23075_Common_Apache
http://www.4shared.com/file/14273904...75_Common.html


SYS_23075_192DPI_0409
http://www.4shared.com/file/14269761...2DPI_0409.html


SYS_23075_96DPI_0409
http://www.4shared.com/file/14269793...6DPI_0409.html


Warning! If these files are used in any other kitchen other than PPCKitchen, please be sure that you fix the file attributes BEFORE or DURING cooking, otherwise problems will ensue (see FIX here). I have attached the removed packages as well if you do use these in another kitchen.

Thanks to Monkeybape for the goods!

Hi, Is ppc kitchen different from ervius visual kitchen , Do we need to fix the attributes for visual kitchen ,Also do we need to port xip for ervius kitchen?
Please also guide me as how to organise sys components like common and dpi files/folders in bepes platform builder kitchen and also for ervius visual kitchen .Thanks .

[acidhax]

Originally Posted by porom14

Hi, Is ppc kitchen different from ervius visual kitchen , Do we need to fix the attributes for visual kitchen ,Also do we need to port xip for ervius kitchen?
Please also guide me as how to organise sys components like common and dpi files/folders in bepes platform builder kitchen and also for ervius visual kitchen .Thanks .

Hey, sorry to sound like an *** -- but I managed to just view the files -- look at similar naming conventions and move as necessary... Than I did a test build, and voila! It worked flawlessly...

I think some good ole trial and error might be your best bet at first
http://lifehacker.com/5386722/get-it...earn-it-better

[joojoobee666]

Originally Posted by porom14

Hi, Is ppc kitchen different from ervius visual kitchen , Do we need to fix the attributes for visual kitchen ,Also do we need to port xip for ervius kitchen?
Please also guide me as how to organise sys components like common and dpi files/folders in bepes platform builder kitchen and also for ervius visual kitchen .Thanks .

The SYS files in ervius are separated by common, lang, and DPI in the following way:

SYS
--XXXXX (build number, i.e. 21075)
----DPI_XXX (where XXX = device DPI like 96, 192 or 128 )
--------0409 - *_Lang_0409_DPI_XXX
--------COMMON - *_DPI_XXX
----DPI_dpi_XXX_resh_YYY_resv_ZZZ (where YYY and ZZZ = screen res, i.e. 480x640, oe 240x320)
--------0409 - *_0409_DPI_XXX_RESH_YYY_RESV_ZZZ
--------COMMON - *_dpi_XXX_resh_YYY_resv_ZZZ
----SHARED
--------0409 - *_Lang_0409
--------COMMON - Common packages (i.e. packages with no DPI, or 0409 in the name)

The MSXIPKernel can be obtained from the XIP by dumping it with XIPport.exe (rename xip to xip.bin). After dumping, do a make packages. Once done, you will be left with the following layout in the OUT folder:

FILES
--MSXIPKernel
--OEMXIPKernl
MODULES
--MSXIPKernel
--OEMXIPKernel

To use these files from the xip in ervius, move them to the following folders:

ROM
--DEVICE (Where this folder will be named Herman, or Raphael, or whatevever)
----XXXXX (where XXXXX is the build number, i.e 23075)
------OEMXIPKernel - Contains all the files and folders under BOTH OEMXIPkernel folders from above, MINUS the .txt files
--SHARED
----XXXXX (where XXXXX is the build number again)
------MSXIPKernel - Contains all files and folder from both MSXIPKernel folder from above, MINUS the txt files. Alternatively, just grab a copy of the files that some posted as usually, someone posts the MSXIPKernel separately for the builds when they come.

Mind you, the MSXIPKernel file are the ones that change from build to build, so those need to match the build you are building for, but the OEMXIPKernel are device specific and can be copied from build to build.

Also, you will need an os.nb.payload and romhdr.bin for your device placed into the ROM\Device folder.

The removed packages from my PPCK files post can be added following the guidelines from above, and don't forget to fix the file permissions.

Hopefully I didn't miss anything.

[porom14]

@joojoobee666 ,
Thank you very much for helping me,
So then If I have MSXIPKernal for some device say Raphael, I can use it for some other HTC devices like elf,hermes ?Do I still need to port it or just put it in the appropriate folder inside the kitchen? Also for ervius visual kitchen ,do I need to fix attributes ?.Sorry,I have been a trouble.

[acidhax]

Is there a 128DPI release for 23075?

[joojoobee666]

Originally Posted by porom14

@joojoobee666 ,
Thank you very much for helping me,
So then If I have MSXIPKernal for some device say Raphael, I can use it for some other HTC devices like elf,hermes ?Do I still need to port it or just put it in the appropriate folder inside the kitchen? Also for ervius visual kitchen ,do I need to fix attributes ?.Sorry,I have been a trouble.

No need to "port" the MSXIPKernel if used in ervius, assuming that you are saying that you pulled the MSXIPKernel files from the xip of another device that was the same build. Just put in into the kitchen.

And you ONLY need to fix attributes if you use the PPCKitchen files for your ervius kitchen.

[cac2us]

Thank you again, joojoobee & all others who make these files available to all of us. Regarding 23075, it might be my test unit, but has any one else had any issues with the hardware keyboard double striking some of the keys? This is on the 6800. I think I recall a discution earlier in this thread, but I don't know how many hundred pages back. For now I will flash another unit with the same ROM and see what happens.