PPCGeeks - WM 6.5 Kitchen QVGA and VGA Developer Edition

PPCGeeks (http://forum.ppcgeeks.com/index.php)

- Windows Mobile Software (http://forum.ppcgeeks.com/forumdisplay.php?f=23)

- - WM 6.5 Kitchen QVGA and VGA Developer Edition (http://forum.ppcgeeks.com/showthread.php?t=54678)

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition

Hey Joojoobee666, any new COM2 builds? I am inclined more towards these, as i am having a 200 Mhz, 64 MB RAM device, and these builds run a lot faster on these devices. It feels snappier almost like 6.1. Can you please keep people like us updated too, just a humble request. I am currently on 21844 and its running awesome, although 21840 is slightly better than this one.

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition

Ok, here's a clean provxml to get Activesync setup for exchange on boot. Just insert this into a provxml or make it one all by itself.

Code:

<wap-provisioningdoc>

   <!-- Mail2web Settings -->

   <characteristic type="Sync">

            <characteristic type="Connection">

            <parm name="Server" value="mail.xxxx.com"/>

            <parm name="AllowSSLOption" value="0"/>

            <parm name="User" value="username"/>

            <parm name="Domain" value="domainname"/>

            <parm name="Password" value="password"/>

            <parm name="SavePassword" value="1"/>

            </characteristic>

        <characteristic type="Settings">

            <parm name="PeakStartTime" value="0700"/>

            <parm name="PeakEndTime" value="2300"/>

            <parm name="PeakFrequency" value="15"/>

            <parm name="BodyTruncation" value="-1"/>

            <parm name="OffPeakFrequency" value="60"/>

            <parm name="PeakEndTime" value="2100"/>

            <parm name="PeakStartTime" value="0700"/>

            <parm name="SyncWhenRoaming" value="1"/>

              <characteristic type="PeakDays">

                            <parm name="Sun" value="1"/>

                            <parm name="Mon" value="1"/>

                            <parm name="Tue" value="1"/>

                            <parm name="Wed" value="1"/>

                            <parm name="Thr" value="1"/>

                            <parm name="Fri" value="1"/>

                            <parm name="Sat" value="1"/>

                          </characteristic>

        </characteristic>

        <characteristic type="Mail">

            <parm name="Enabled" value="1"/>

            <parm name="MailBodyTruncation" value="-1"/>

            <parm name="MailFileAttachments" value="25600"/>

        </characteristic>

        <characteristic type="Calendar">

                <parm name="CalendarAgeFilter" value="7"/>

            <parm name="Enabled" value="1"/>

        </characteristic>

        <characteristic type="Contacts">

            <parm name="Enabled" value="1"/>

        </characteristic>

     <characteristic type="Tasks">

       <parm name="Enabled" value="1"/>

     </characteristic>

   </characteristic>

</wap-provisioningdoc>

I have my certificate in with my provxml :) The utility that is used to get the cert is here ->http://blogs.msdn.com/windowsmobile/...-released.aspx Just grab Version 2. Run it with the mail server as option and it will create an xml file with the cert in it. Just copy the crap out of it and drop it into a provxml (just use the same one). Done ;)

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition

Quote:

Originally Posted by joojoobee666 (Post 1129049)

Ok, here's a clean provxml to get Activesync setup for exchange on boot. Just insert this into a provxml or make it one all by itself.

I have my certificate in with my provxml :) The utility that is used to get the cert is here ->http://blogs.msdn.com/windowsmobile/...-released.aspx Just grab Version 2. Run it with the mail server as option and it will create an xml file with the cert in it. Just copy the crap out of it and drop it into a provxml (just use the same one). Done ;)

Fantastic!. :D Thanks.

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition

Quote:

Originally Posted by humrod (Post 1128935)

About 23405: I have the start button on the up left corner, instead down left corner as usual in last builds. Is this in this way on this build?

+1 I wanted the bottom buttons and start for finger friendly... start didn't happen :(

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition

Hi guys
some time back there was a problem with screenlock the button was at the bottom of the screen?
can anybody tell me what the fix is please,
my button is at the top, but hotspot is at the bottom:scratch:
thanks in advance
regards
swampy395

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition

Quote:

Originally Posted by swampy395 (Post 1129169)

Try these ->http://forum.xda-developers.com/show...67#post4397167

drkfngthdragnlrd fixed these up for something, but I don't know what. Either way, it's just modifying the LS_LockScene_XXXxYYY.cpr files.

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition

Quote:

Originally Posted by MassStash (Post 1128518)

have you checked this out? http://forum.xda-developers.com/showthread.php?t=530710, what's your take on it?
a lil over my head with the setup in the xip i think, as of now, but the concept seems pretty sweet

Ok, just got to looking at it today. I'm sure I can get you Titan XIP with the Extendir stuff added in. Just have to do some manual work on the XIP, but thats no problem. I, myself am not going to play around with it, but if you want to, be my guest. Just let me know if you need a XIP or not :)

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition

Quote:

Originally Posted by joojoobee666 (Post 1129205)

I would be interested in trying it on the titan. Anything to increase performance and battery life since the titian is not likely to get a decent video driver or native 6.5 kernel. Would it work with 23037?

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition

Quote:

Originally Posted by corey1138 (Post 1129279)

Yeah, it should work, but realize, that you will lose even MORE ram using this. There are different levels of cache, but I'll do the 2MB version. It goes all the way up to 16MB.

Gimme me a bit and I'll post a 23037 XIP. No promises on anything though:silent:

Re: WM 6.5 Kitchen QVGA and VGA Developer Edition

Ok, heres the Titan XIP with Extendir. I can't test, so....:???:

Anyhow, there are 2 XIPs, one without WinCE.NLS, and one with it in case the one without doesn't boot. Hell, they both may not boot....

Also, you will need to replace the boot.rgu in the Titan_Core.rar\ROM\XIP with the one attached here. Make sure you save the original :)